Film cooling effectiveness in hypersonic turbulent flow

The effect of introducing ramp with a cylindrical slot hole on the film cooling effectiveness has been investigated experimentally and numerically. The film cooling effectiveness measurements are obtained experimentally. A test study was performed at a single mainstream with Reynolds number 76600 at three different coolant to mainstream blowing ratios 1.5, 2, and 3. Numerical simulation is introduced to primarily estimate the best ramp configurations and to predict the behavior of the transport phenomena in the region linked closely to the interaction between the coolant air injection and the hot air mainstram flow. The results showed that using ramps with trench cylindrical holes would enhanced the overall film cooling effectiveness by 83.33% compared with baseline model at blowing ratio of 1.5, also the best overall flim cooling effectevness was obtained at blowing ratio of 2 while it is reduced at blowing ratio of 3.

Download Full-text

Conjugate Heat Transfer and Film Cooling of a Multi-Stage Cooling Scheme

Volume 10: Heat Transfer, Fluid Flows, and Thermal Systems, Parts A, B, and C ◽

10.1115/imece2008-69138 ◽

2008 ◽

Author(s):

M. Ghorab ◽

S. I. Kim ◽

I. Hassan

Keyword(s):

Heat Transfer ◽

Film Cooling ◽

Gas Turbines ◽

Conjugate Heat Transfer ◽

Density Ratio ◽

Design Parameters ◽

Cooling Effectiveness ◽

Film Cooling Effectiveness ◽

Multi Stage ◽

Internal Gap

Cooling techniques play a key role in improving efficiency and power output of modern gas turbines. The conjugate technique of film and impingement cooling schemes is considered in this study. The Multi-Stage Cooling Scheme (MSCS) involves coolant passing from inside to outside turbine blade through two stages. The first stage; the coolant passes through first hole to internal gap where the impinging jet cools the external layer of the blade. Finally, the coolant passes through the internal gap to the second hole which has specific designed geometry for external film cooling. The effect of design parameters, such as, offset distance between two-stage holes, gap height, and inclination angle of the first hole, on upstream conjugate heat transfer rate and downstream film cooling effectiveness performance are investigated computationally. An Inconel 617 alloy with variable properties is selected for the solid material. The conjugate heat transfer and film cooling characteristics of MSCS are analyzed across blowing ratios of Br = 1 and 2 for density ratio, 2. This study presents upstream wall temperature distributions due to conjugate heat transfer for different gap design parameters. The maximum film cooling effectiveness with upstream conjugate heat transfer is less than adiabatic film cooling effectiveness by 24–34%. However, the full coverage of cooling effectiveness in spanwise direction can be obtained using internal cooling with conjugate heat transfer, whereas adiabatic film cooling effectiveness has narrow distribution.

Download Full-text

Investigations on the effect of different influencing factors on film cooling effectiveness under the injection of synthetic coolant

Scientific Reports ◽

10.1038/s41598-021-83080-9 ◽

2021 ◽

Vol 11 (1) ◽

Author(s):

Jianlong Chang ◽

Xinlei Duan ◽

Yang Du ◽

Baoquan Guo ◽

Yutian Pan

Keyword(s):

Film Cooling ◽

Elliptical Hole ◽

Synthetic Jet ◽

Cooling Effect ◽

Flow Structures ◽

Cooling Effectiveness ◽

Film Cooling Effectiveness ◽

Cooling Flow ◽

Cooling Method ◽

Strong Controllability

AbstractBy combining the synthetic jet and film cooling, the incident cooling flow is specially treated to find a better film cooling method. Numerical simulations of the synthetic coolant ejected are carried out for analyzing the cooling performance in detail, under different blowing ratios, hole patterns, Strouhal numbers, and various orders of incidence for the two rows of holes. By comparing the flow structures and the cooling effect corresponding to the synthetic coolant and the steady coolant fields, it is found that within the scope of the investigations, the best cooling effect can be obtained under the incident conditions of an elliptical hole with the aspect ratio of 0.618, the blow molding ratio of 2.5, and the Strouhal number St = 0.22. Due to the strong controllability of the synthetic coolant, the synthetic coolant can be controlled through adjusting the frequency of blowing and suction, so as to change the interaction between vortex structures for improving film cooling effect in turn. As a result, the synthetic coolant ejection is more advisable in certain conditions to achieve better outcomes.

Download Full-text

The Influence of Compressibility on Film Cooling Effectiveness

44th AIAA/ASME/SAE/ASEE Joint Propulsion Conference & Exhibit ◽

10.2514/6.2008-5032 ◽

2008 ◽

Cited By ~ 2

Author(s):

Kiran Dellimore ◽

Andre Marshall ◽

Christopher Cadou

Keyword(s):

Film Cooling ◽

Cooling Effectiveness ◽

Film Cooling Effectiveness

Download Full-text