Injection effects in high Prandtl number boundary-layer flows.

AIAA Journal ◽  
1968 ◽  
Vol 6 (9) ◽  
pp. 1796-1797 ◽  
Author(s):  
D. R. KASSOY
Keyword(s):  
Boundary Layer ◽  
Prandtl Number ◽  
Boundary Layer Flows ◽  
High Prandtl Number

Asymptotic expansions for laminar forced-convection heat and mass transfer Part 2. Boundary-layer flows

1966 ◽  
Vol 24 (2) ◽  
pp. 339-366 ◽  
Author(s):  
J. D. Goddard ◽  
Andreas Acrivos
Keyword(s):  
Heat Transfer ◽  
Boundary Layer ◽  
Mass Transfer ◽  
Prandtl Number ◽  
Order Term ◽  
Higher Order ◽  
Convection Heat ◽  
Boundary Layer Flows ◽  
Prandtl Numbers ◽  
Higher Order Term

This is the second of two articles by the authors dealing with asymptotic expansions for forced-convection heat or mass transfer to laminar flows. It is shown here how the method of the first paper (Acrivos & Goddard 1965), which was used to derive a higher-order term in the large Péclet number expansion for heat or mass transfer to small Reynolds number flows, can yield equally well higher-order terms in both the large and the small Prandtl number expansions for heat transfer to laminar boundary-layer flows. By means of this method an exact expression for the first-order correction to Lighthill's (1950) asymptotic formula for heat transfer at large Prandtl numbers, as well as an additional higher-order term for the small Prandtl number expansion of Morgan, Pipkin & Warner (1958), are derived. The results thus obtained are applicable to systems with non-isothermal surfaces and arbitrary planar or axisymmetric flow geometries. For the latter geometries a derivation is given of a higher-order term in the Péclet number expansion which arises from the curvature of the thermal layer for small Prandtl numbers. Finally, some applications of the results to ‘similarity’ flows are also presented.

An integral approach to the calculation of skin friction and heat transfer in the laminar flow of a high-Prandtl-number power-law non-Newtonian fluid past a wedge

1991 ◽  
Vol 69 (2) ◽  
pp. 83-89 ◽  
Author(s):  
G. Ramamurty ◽  
K. Narasimha Rao ◽  
K. N. Seetharamu
Keyword(s):  
Heat Transfer ◽  
Boundary Layer ◽  
Prandtl Number ◽  
Skin Friction ◽  
Layer Thickness ◽  
Power Law ◽  
Boundary Layer Thickness ◽  
Thermal Boundary Layer ◽  
Integral Approach ◽  
High Prandtl Number

An integral approach to the theoretical analysis for the skin friction of a non-Newtonian, power-law-fluid flow over a wedge is presented, when the inertia terms in the boundary-layer equations are small but need consideration. The method adopted for the solution of the equations considers an integrated average value of the inertia terms in the momentum equation. The values of the velocities and the boundary-layer thickness obtained from the hydrodynamic analysis are used for the calculation of the thermal-boundary-layer thickness. A linear velocity profile is assumed for the flow field within the thermal boundary layer as the fluids chosen for the analysis are high-Prandtl-number fluids. The results of the skin friction and the rates of the heat transfer are tabulated for a number of values of the flow behaviour index, n, varying from 0.05 to 5.0. This analysis is applicable to viscous polymer solutions having high Prandtl numbers.

Analysis of mixed convection in water boundary layer flows over a moving vertical plate with variable viscosity and Prandtl number

2019 ◽  
Vol 29 (2) ◽  
pp. 602-616 ◽  
Author(s):  
Abhishek Kumar Singh ◽  
A.K. Singh ◽  
S. Roy
Keyword(s):  
Boundary Layer ◽  
Prandtl Number ◽  
Skin Friction ◽  
Free Stream ◽  
Free Stream Velocity ◽  
Stream Velocity ◽  
Boundary Layer Flows ◽  
Partial Differential ◽  
Content Type ◽  
Reference Velocity

Purpose The purpose of the present study is to analyze the mixed convection water boundary layer flows over moving vertical plate with variable viscosity and Prandtl number. The non-linear partial differential equation governing the flow and thermal fields are presented in non-dimensional form by using appropriate transformation. The quasi-linearization technique in combination with implicit finite difference scheme has been adopted to solve the nonlinear-coupled partial differential equation. The numerical results are displayed graphically to illustrate the influence of various non-dimensional physical parameters on velocity and temperature. Further, the numerical results for local skin-friction coefficient and local Nusselt number are also reported. The present findings are compared with previously reported results, and these comparisons are found to be in excellent agreement. Design/methodology/approach The nonlinear partial differential equations governing the flow and thermal fields have been solved numerically using the implicit finite difference scheme in combination with the quasi-linearization technique. The numerical results are presented in terms of skin friction and heat transfer rate which are useful in determining the surface heat requirements for stabilizing the laminar boundary layer flow over a moving plate in water. Findings The effect of the ratio of free-stream velocity to the composite reference velocity is significant on the velocity profile. Near the wall region, as ratio of free stream velocity to composite reference velocity increases form 0.1 to 0.5, the velocity overshoot gets enhanced from 3 per cent to 41 per cent. The influence of buoyancy parameter and ration of free stream velocity to composite reference velocity on temperature profile is comparatively less than on velocity profiles. The increase in the skin friction coefficient is dependent on the increase in the value of ratio of free stream velocity to composite reference velocity if the buoyancy parameter λ is fixed and vice versa and increases in ΔT results in a decrease in N and Pr. Originality/value The present investigation is to deal with the solution of steady laminar water boundary layer flows over a moving plate with temperature-dependent viscosity and Prandtl number applicable for water using practical data. The fluid considered here is water, as it is one of the most common working fluids found in engineering applications.

Sign in / Sign up

Export Citation Format

Share Document