Determination of hot-gas temperature profiles from infrared emission and absorption spectra

AIAA Journal ◽  
1965 ◽  
Vol 3 (7) ◽  
pp. 1359-1360 ◽  
Author(s):  
BURTON KRAKOW
2019 ◽  
Vol 492 (2) ◽  
pp. 2095-2118
Author(s):  
Dong-Woo Kim ◽  
Liam Traynor ◽  
Alessandro Paggi ◽  
Ewan O'Sullivan ◽  
Craig Anderson ◽  
...  

ABSTRACT Using the data products of the Chandra Galaxy Atlas (Kim et al.), we have investigated the radial profiles of the hot gas temperature in 60 early-type galaxies (ETGs). Considering the characteristic temperature and radius of the peak, dip, and break (when scaled by the gas temperature and virial radius of each galaxy), we propose a universal temperature profile of the hot halo in ETGs. In this scheme, the hot gas temperature peaks at RMAX = 35 ± 25 kpc (or ∼0.04 RVIR) and declines both inward and outward. The temperature dips (or breaks) at RMIN (or RBREAK) = 3–5 kpc (or ∼0.006 RVIR). The mean slope between RMIN (RBREAK) and RMAX is 0.3 ± 0.1. Allowing for selection effects and observational limits, we find that the universal temperature profile can describe the temperature profiles of 72 per cent (possibly up to 82 per cent) of our ETG sample. The remaining ETGs (18 per cent) with irregular or monotonically declining profiles do not fit the universal profile and require another explanation. The temperature gradient inside RMIN (RBREAK) varies widely, indicating different degrees of additional heating at small radii. Investigating the nature of the hot core (HC with a negative gradient inside RMIN), we find that HC is most clearly visible in small galaxies. Searching for potential clues associated with stellar, active galactic nucleus (AGN) feedback, and gravitational heating, we find that HC may be related to recent star formation. But we see no clear evidence that AGN feedback and gravitational heating play any significant role for HC.


1978 ◽  
Vol 32 (3) ◽  
pp. 310-316 ◽  
Author(s):  
L. M. Gratton ◽  
S. Paglia ◽  
F. Scattaglia ◽  
M. Cavallini

The present work points out the utility of infrared emission spectroscopy as applied to the study of the oxidation of metal surfaces. It is shown that good results can be achieved even with standard dispersion spectrophotometers. The work shows emission spectra obtained at a temperature of only 133°C from samples of about 380 A thickness and 2 cm2 area. The molybdenum oxides are particularly useful to test the capability of the infrared emission spectroscopy technique. The study of the behavior of the emission bands and the differences between the emission and absorption spectra show that this technique cannot only be an alternative to absorption spectroscopy, but also can give different data from those which can be achieved by the absorption technique. Spectra are recorded directly on the oxidizing sample. The increase in intensity and the change in the shape of the bands are monitored while the oxidation is performed. It is noted that with infrared emission spectroscopy, sample preparation is greatly simplified.


1962 ◽  
Vol 84 (2) ◽  
pp. 164-168 ◽  
Author(s):  
Richard H. Tourin

The application of monochromatic radiation pyrometry to measurement of plasma temperatures was investigated. Infrared emission and absorption spectra of nitrogen, argon, and helium plasmajets, with various admixtures, were measured. Strong infrared emission was observed in various lines and bands in the plasma spectra, extending from the visible region to 7.0 μ. The observed infrared absorption was generally low. Temperatures measured ranged from below 2000 deg K for a N2 plasmajet heavily seeded with CO2, to 13,000 deg K for pure Ar. Temperature gradients in a plasmajet were inferred from observations made through various regions of the jet.


1982 ◽  
Vol 47 (2) ◽  
pp. 503-508 ◽  
Author(s):  
Irena Němcová ◽  
Pavla Plocková ◽  
Tran Hong Con

The absorption spectra of the binary complexes of lanthanoids with bromopyrogallol red were measured and the formation of ternary complexes with cation active tenside, Septonex, was studied. Optimal conditions were found for the formation of these complexes and the possibility of their use in the photometric determination of lanthanoids was demonstrated on several examples.


1975 ◽  
Vol 29 (6) ◽  
pp. 496-500 ◽  
Author(s):  
D. Kember ◽  
N. Sheppard

Infrared emission spectra from metal samples with oxide surface layers are shown to be very advantageously studied using the spectrum-ratioing facility of a recording infrared interferometer. The emission from a given sample is ratioed against that from a black-body emitter at the same temperature so as to give emittance as a function of wavenumber directly. This method has very useful application to irregularly shaped metal emitters. In the absence of selective reflection there is a direct correspondence between emission and absorption spectra for thin layers of an emitting substance. However, the presence of selective reflection leads to reduced emission and to considerable differences in the appearance of “absorption” and emission spectra in regions of strong absorption. Emission spectra obtained from copper plates heated, above 150°C, for different periods in air are shown clearly to indicate the presence of cuprous, Cu(I), and cupric, Cu(II), oxides in the surface layer.


RSC Advances ◽  
2021 ◽  
Vol 11 (35) ◽  
pp. 21332-21342
Author(s):  
Ibrahim A. Naguib ◽  
Eglal A. Abdelaleem ◽  
Eman S. Hassan ◽  
Aml A. Emam

Zero order absorption spectra of 12 μg mL−1 of Dacarbazine (), 5-amino-imidazole-4 carboxamide (), and 2-azahypoxanthine (…) using sterile water as a blank.


Sign in / Sign up

Export Citation Format

Share Document