Rate parameters for coupled vibration-dissociation in a generalized SSH approximation

10.2514/3.312 ◽  
1992 ◽  
Vol 6 (1) ◽  
pp. 9-21 ◽  
Author(s):  
Surendra P. Sharma ◽  
Winifred M. Huo ◽  
Chul Park
Keyword(s):  
Coupled Vibration

Coupled vibration model of cables and its parameter analysis

2015 ◽  
Vol 32 (3) ◽  
pp. 231
Author(s):  
Haitao Liu ◽  
Minghai Wei ◽  
Kun Lin ◽  
Yiqing Xiao
Keyword(s):  
Parameter Analysis ◽  
Coupled Vibration ◽  
Vibration Model

Roller–rail parameters on the transverse vibration characteristics of super-high-speed elevators

2019 ◽  
Vol 43 (4) ◽  
pp. 535-543 ◽  
Author(s):  
Shunxin Cao ◽  
Ruijun Zhang ◽  
Shuohua Zhang ◽  
Shuai Qiao ◽  
Dongsheng Cong ◽  
...  
Keyword(s):  
High Speed ◽  
Relative Displacement ◽  
Guide Rail ◽  
Coupled Vibration ◽  
Vibration Acceleration ◽  
Vibration Model ◽  
Vibration Problems ◽  
Equivalent Method ◽  
Relationship Of ◽  
The Relationship

Interaction and wear between wheel and rail become increasingly serious with the increase in elevator speed and load. Uneven roller surface, eccentricity of rollers, and the looseness of rail brackets result in serious vibration problems of high-speed and super-high-speed elevators. Therefore, the forced vibration differential equation representing elevator guide rails is established based on Bernoulli–Euler theory, and the vibration equation of the elevator guide shoes and the car is constructed using the Darren Bell principle. Then, the coupled vibration model of guide rail, guide shoes, and car can be obtained using the relationship of force and relative displacement among these components. The roller–rail parameters are introduced into the established coupled vibration model using the model equivalent method. Then, the influence of roller–rail parameters on the horizontal vibration of super-high-speed elevator cars is investigated. Roller eccentricity and the vibration acceleration of the car present a linear correlation, with the amplitude of the car vibration acceleration increasing with the eccentricity of the roller. A nonlinear relationship exists between the surface roughness of the roller and the vibration acceleration of the car. Increased continuous loosening of the guide rail results in severe vibration of the car at the loose position of the support.

Mechanisms and Mitigation of 3D Coupled Vibrations in Drilling with PDC Bits

2021 ◽  
Author(s):  
Shilin Chen ◽  
Chris Propes ◽  
Curtis Lanning ◽  
Brad Dunbar
Keyword(s):  
Torsional Oscillation ◽  
Excitation Frequency ◽  
Low Frequency ◽  
Coupled Vibration ◽  
Stick Slip ◽  
Rock Interaction ◽  
Bottom Hole ◽  
New Type ◽  
Design Characteristics ◽  
Axial Resonance

Abstract In this paper we present a new type of vibration related to PDC bits in drilling and its mitigation: a vibration coupled in axial, lateral and torsional directions at a high common frequency (3D coupled vibration). The coupled frequency is as high as 400Hz. 3D coupled vibration is a new dysfunction in drilling operation. This type of vibration occurred more often than stick-slip vibration. Evidences reveal that the coupled frequency is an excitation frequency coming from the bottom hole pattern formed in bit/rock interaction. This excitation frequency and its higher order harmonics may excite axial resonance and/or torsional resonance of a BHA. The nature of 3D coupled vibration is more harmful than low frequency stick-slip vibration and high frequency torsional oscillation (HFTO). The correlation between the occurrence of 3D coupled vibration and bit design characteristics is studied. Being different from prior publications, we found the excitation frequency is dependent on bit design and the occurrence of 3D coupled vibration is correlated with bit design characteristics. New design guidlines have been proposed to reduce or to mitigate 3D coupled vibration.

Sign in / Sign up

Export Citation Format

Share Document