Transient temperature variation in a thermally orthotropic cylindrical shell

AIAA Journal ◽  
1964 ◽  
Vol 2 (1) ◽  
pp. 124-126 ◽  
Author(s):  
K. J. TOURYAN
Keyword(s):  
Cylindrical Shell ◽  
Temperature Variation ◽  
Orthotropic Cylindrical Shell ◽  
Transient Temperature

Collapse of Arteries Subjected to an External Band of Pressure

1980 ◽  
Vol 102 (1) ◽  
pp. 8-22 ◽  
Author(s):  
A. M. Hecht ◽  
H. Yeh ◽  
S. M. K. Chung
Keyword(s):  
Reynolds Number ◽  
Blood Flow ◽  
Cylindrical Shell ◽  
Orthotropic Cylindrical Shell ◽  
Reynolds Numbers ◽  
Intraluminal Pressure ◽  
Collapse Pressure ◽  
Vessel Size ◽  
Flow Reynolds Number ◽  
Small Band

Collapse of arteries subjected to a band of hydrostatic pressure of finite length is analyzed. The vessel is treated as a long, thin, linearly elastic, orthotropic cylindrical shell, homogeneous in composition, and with negligible radial stresses. Blood in the vessel is treated as a Newtonian fluid and the Reynolds number is of order 1. Results are obtained for effects of the following factors on arterial collapse: intraluminal pressure, length of the pressure band, elastic properties of the vessel, initial stress both longitudinally and circumferentially, blood flow Reynolds number, compressibility, and wall thickness to radius ratio. It is found that the predominant parameter influencing vessel collapse for the intermediate range of vessel size and blood flow Reynolds numbers studied is the preconstricted intraluminal pressure. For pressure bands less than about 10 vessel radii the collapse pressure increases sharply with increasing intraluminal pressure. Initial axial prestress is found to be highly stabilizing for small band lengths. The effects of fluid flow are found to be small for pressure bands of less than 100 vessel radii. No dramatic orthotropic vessel behavior is apparent. The analysis shows that any reduction in intraluminal pressure, such as that produced by an upstream obstruction, will significantly lower the required collapse pressure. Medical implications of this analysis to Legg-Perthes disease are discussed.

Thermo-mechanical analysis of a FGM plate subjected to thermal shock – A new numerical approach considering real time temperature dependent material properties

2021 ◽  
Vol 63 (4) ◽  
pp. 341-349
Author(s):  
Mete Onur Kaman ◽  
Nevin Celik ◽  
Resul Das
Keyword(s):  
Heat Transfer ◽  
Heat Transfer Coefficient ◽  
Transfer Coefficient ◽  
Thermal Shock ◽  
Temperature Variation ◽  
Material Properties ◽  
Ambient Air ◽  
Transient Temperature ◽  
Heated Plate ◽  
The Heat Transfer Coefficient

Abstract In present the study, sudden cooling, in other words thermal shock, is applied to a plate that is originally a functionally graded material (FGM). The flat plate is assumed to have an edge crack on it. Hence a numerical couple-field analysis is performed on the plate. The FGM is a combination of Ni and Al2O3. The thermal and mechanical properties of the FGM are assumed to depend on temperature variation. The mixing percentages of the Ni and Al2O3 throughout the plate are considered to vary (i) linearly, (ii) quadratically and (iii) in half-order. In order to solve the problem, a new subroutine depending on temperature is written using APDL (ANSYS Parametric Design Language) codes. Three values of the heat transfer coefficient are applied to the initially heated plate. As a result, the transient temperature variation and stress intensity factor are presented to show the thermo-mechanical relation of the plate. The material properties changing with temperature results in more reliable temperature values. Increasing the heat transfer coefficient results in better cooling and in a lesser amount of time to reach ambient air temperature.

Sign in / Sign up

Export Citation Format

Share Document