Shaping of system responses with minimax optimization in the time domain

Тhe advantage of combine processing of frequency domain and time domain data provided by the EQUATOR system is discussed. The heliborne complex has a towed transmitter, and, raised above it on the same cable a towed receiver. The excitation signal contains both pulsed and harmonic components. In fact, there are two independent transmitters operate in the system: one of them is a normal pulsed domain transmitter, with a half-sinusoidal pulse and a small "cut" on the falling edge, and the other one is a classical frequency domain transmitter at several specially selected frequencies. The received signal is first processed to a direct Fourier transform with high Q-factor detection at all significant frequencies. After that, in the spectral region, operations of converting the spectra of two sounding signals to a single spectrum of an ideal transmitter are performed. Than we do an inverse Fourier transform and return to the time domain. The detection of spectral components is done at a frequency band of several Hz, the receiver has the ability to perfectly suppress all sorts of extra-band noise. The detection bandwidth is several dozen times less the frequency interval between the harmonics, it turns out thatto achieve the same measurement quality of ground response without using out-of-band suppression you need several dozen times higher moment of airborne transmitting system. The data obtained from the model of a homogeneous half-space, a two-layered model, and a model of a horizontally layered medium is considered. A time-domain data makes it easier to detect a conductor in a relative insulator at greater depths. The data in the frequency domain gives more detailed information about subsurface. These conclusions are illustrated by the example of processing the survey data of the Republic of Rwanda in 2017. The simultaneous inversion of data in frequency domain and time domain can significantly improve the quality of interpretation.

Download Full-text

New possibilities for large signal periodic simulation in the time-domain

10.1049/ic:19951202 ◽

1995 ◽

Author(s):

K.R. Whight

Keyword(s):

Time Domain ◽

Large Signal ◽

The Time Domain

Download Full-text

Broadband spectroscopy of astrophysical ice analogues

Astronomy and Astrophysics ◽

10.1051/0004-6361/201935619 ◽

2019 ◽

Vol 629 ◽

pp. A112 ◽

Cited By ~ 8

Author(s):

B. M. Giuliano ◽

A. A. Gavdush ◽

B. Müller ◽

K. I. Zaytsev ◽

T. Grassi ◽

...

Keyword(s):

Refractive Index ◽

Optical Properties ◽

Time Domain ◽

Complex Refractive Index ◽

Far Infrared ◽

Infrared Region ◽

Thz Radiation ◽

The Real ◽

Thz Range ◽

The Time Domain

Context. Reliable, directly measured optical properties of astrophysical ice analogues in the infrared and terahertz (THz) range are missing from the literature. These parameters are of great importance to model the dust continuum radiative transfer in dense and cold regions, where thick ice mantles are present, and are necessary for the interpretation of future observations planned in the far-infrared region. Aims. Coherent THz radiation allows for direct measurement of the complex dielectric function (refractive index) of astrophysically relevant ice species in the THz range. Methods. We recorded the time-domain waveforms and the frequency-domain spectra of reference samples of CO ice, deposited at a temperature of 28.5 K and annealed to 33 K at different thicknesses. We developed a new algorithm to reconstruct the real and imaginary parts of the refractive index from the time-domain THz data. Results. The complex refractive index in the wavelength range 1 mm–150 μm (0.3–2.0 THz) was determined for the studied ice samples, and this index was compared with available data found in the literature. Conclusions. The developed algorithm of reconstructing the real and imaginary parts of the refractive index from the time-domain THz data enables us, for the first time, to determine the optical properties of astrophysical ice analogues without using the Kramers–Kronig relations. The obtained data provide a benchmark to interpret the observational data from current ground-based facilities as well as future space telescope missions, and we used these data to estimate the opacities of the dust grains in presence of CO ice mantles.

Download Full-text

EPR light beams and non-Gaussian quantum distributions in the time domain

Physics of Particles and Nuclei Letters ◽

10.1134/s1547477109070188 ◽

2009 ◽

Vol 6 (7) ◽

pp. 577-580

Author(s):

N. H. Adamyan ◽

H. H. Adamyan ◽

G. Yu. Kryuchkyan

Keyword(s):

Time Domain ◽

Non Gaussian ◽

The Time Domain ◽

Light Beams ◽

Quantum Distributions

Download Full-text

Separating Multiple Moving Sources by Microphone Array Signals for Wayside Acoustic Fault Diagnosis

Journal of Vibration and Acoustics ◽

10.1115/1.4043508 ◽

2019 ◽

Vol 141 (5) ◽

Author(s):

Wei Xiong ◽

Qingbo He ◽

Zhike Peng

Keyword(s):

Fault Diagnosis ◽

Time Domain ◽

Feature Matching ◽

Matching Pursuit ◽

Microphone Array ◽

Time Frequency ◽

Moving Sources ◽

The Time Domain ◽

Envelope Spectrum ◽

Threshold Setting

Wayside acoustic defective bearing detector (ADBD) system is a potential technique in ensuring the safety of traveling vehicles. However, Doppler distortion and multiple moving sources aliasing in the acquired acoustic signals decrease the accuracy of defective bearing fault diagnosis. Currently, the method of constructing time-frequency (TF) masks for source separation was limited by an empirical threshold setting. To overcome this limitation, this study proposed a dynamic Doppler multisource separation model and constructed a time domain-separating matrix (TDSM) to realize multiple moving sources separation in the time domain. The TDSM was designed with two steps of (1) constructing separating curves and time domain remapping matrix (TDRM) and (2) remapping each element of separating curves to its corresponding time according to the TDRM. Both TDSM and TDRM were driven by geometrical and motion parameters, which would be estimated by Doppler feature matching pursuit (DFMP) algorithm. After gaining the source components from the observed signals, correlation operation was carried out to estimate source signals. Moreover, fault diagnosis could be carried out by envelope spectrum analysis. Compared with the method of constructing TF masks, the proposed strategy could avoid setting thresholds empirically. Finally, the effectiveness of the proposed technique was validated by simulation and experimental cases. Results indicated the potential of this method for improving the performance of the ADBD system.

Download Full-text

Diagnostically Oriented Experiments and Modelling of Switched Reluctance Motor Dynamic Eccentricity

Sensors ◽

10.3390/s21113857 ◽

2021 ◽

Vol 21 (11) ◽

pp. 3857

Author(s):

Jakub Lorencki ◽

Stanisław Radkowski ◽

Szymon Gontarz

Keyword(s):

Time Domain ◽

Test Bench ◽

Switched Reluctance Motor ◽

Industrial Applications ◽

Switched Reluctance ◽

Static And Dynamic Analysis ◽

Geometry Model ◽

Reluctance Motor ◽

Dynamic Eccentricity ◽

The Time Domain

The article compares the results of experimental and modelling research of switched reluctance motor at two different operational states: one proper and one with mechanical fault, i.e., with dynamic eccentricity of the rotor. The experiments were carried out on a test bench and then the results were compared with mathematical modelling of quasi-static and dynamic analysis of 2D geometry model. Finally, it was examined how the operation with dynamic eccentricity fault of the motor affected its main physical parameter—the phase current. The analysis was presented in the frequency domain using the Fast Fourier Transform (FFT); however, individual current waveforms in the time domain are also shown for comparison. Applying results of the research could increase reliability of the maintenance of SRM and enhance its application in vehicles for special purposes as well as its military and industrial applications.

Download Full-text