Finite element analysis of composite structures containing distributed piezoceramic sensors and actuators

AIAA Journal ◽  
1992 ◽  
Vol 30 (3) ◽  
pp. 772-780 ◽  
Author(s):  
Sung Kyu Ha ◽  
Charles Keilers ◽  
Fu-Kuo Chang
Keyword(s):  
Finite Element Analysis ◽  
Finite Element ◽  
Composite Structures ◽  
Sensors And Actuators ◽  
Element Analysis

Behaviour of Axially Loaded Composite Wall Panel by Using Finite Element Analysis

2015 ◽  
Vol 815 ◽  
pp. 49-53
Author(s):  
Nur Fitriah Isa ◽  
Mohd Zulham Affandi Mohd Zahid ◽  
Liyana Ahmad Sofri ◽  
Norrazman Zaiha Zainol ◽  
Muhammad Azizi Azizan ◽  
...  
Keyword(s):  
Finite Element Analysis ◽  
Finite Element ◽  
Composite Structures ◽  
Element Analysis ◽  
Steel Sheets ◽  
Linear Behavior ◽  
Non Linear ◽  
Composite Wall ◽  
Experimental Values ◽  
Civil Engineering Infrastructure

In order to promote the efficient use of composite materials in civil engineering infrastructure, effort is being directed at the development of design criteria for composite structures. Insofar as design with regard to behavior is concerned, it is well known that a key step is to investigate the influence of geometric differences on the non-linear behavior of the panels. One possible approach is to use the validated numerical model based on the non-linear finite element analysis (FEA). The validation of the composite panel’s element using Trim-deck and Span-deck steel sheets under axial load shows that the present results have very good agreement with experimental references. The developed finite element (FE) models are found to reasonably simulate load-displacement response, stress condition, giving percentage of differences below than 15% compared to the experimental values. Trim-deck design provides better axial resistance than Span-deck. More concrete in between due to larger area of contact is the factor that contributes to its resistance.

Advancement in the Application of Finite Element Analysis to the Optimization of Composite Yacht Structures

2011 ◽  
Author(s):  
David Fornaro
Keyword(s):  
Finite Element Analysis ◽  
Finite Element ◽  
Composite Structures ◽  
State Of The Art ◽  
Load Case ◽  
Post Processing ◽  
Principal Stresses ◽  
Element Analysis ◽  
Current State ◽  
Case Development

Finite Element Analysis (FEA) is mature technology that has been in use for several decades as a tool to optimize structures for a wide variety of applications. Its application to composite structures is not new, however the technology for modeling and analyzing the behavior of composite structures continues to evolve on several fronts. This paper provides a review of the current state-of-the-art with regard to composites FEA, with a particular emphasis on applications to yacht structures. Topics covered are divided into three categories: Pre-processing; Postprocessing; and Non-linear Solutions. Pre-processing topics include meshing, ply properties, laminate definitions, element orientations, global ply tracking and load case development. Post-processing topics include principal stresses, failure indices and strength ratios. Nonlinear solution topics include progressive ply failure. Examples are included to highlight the application of advanced finite element analysis methodologies to the optimization of composite yacht structures.

Improvements of a Nonlinear Analysis Guideline for the Re-examination of Existing Urban Concrete Structures

2019 ◽  
Author(s):  
Ane de Boer ◽  
Max A. N. Hendriks ◽  
Eva O. L. Lantsoght
Keyword(s):  
Finite Element Analysis ◽  
Finite Element ◽  
Nonlinear Analysis ◽  
Composite Structures ◽  
Concrete Slab ◽  
Concrete Structures ◽  
Nonlinear Finite Element Analysis ◽  
Nonlinear Finite Element ◽  
Reinforced Concrete Slab ◽  
Element Analysis

<p>The Dutch Ministry of Infrastructure and the Environment is concerned with the safety of existing infrastructure and expected re-analysis of a large number of bridges and viaducts. Nonlinear finite element analysis can provide a tool to assess safety; a more realistic estimation of the existing safety can be obtained.</p><p>Dutch Guidelines, based on scientific research, general consensus among peers, and a long-term experience with nonlinear analysis, allow for a reduction of model and user factors and improve the robustness of nonlinear finite element analyses.</p><p>The 2017 version of the guidelines can be used for the finite element analysis of basic concrete structural elements like beams, girders and slabs, reinforced or prestressed. Existing structures, like box-girder structures, culverts and bridge decks with prestressed girders in composite structures can be analysed.</p><p>The guidelines have been developed with a two-fold purpose. First, to advice analysts on nonlinear finite element analysis of reinforced and pre-stressed concrete structures. Second, to explain the choices made and to educate analysts, related to the responsibility of limiting model uncertainty.</p><p>This paper contains an overview of the latest version of the guideline and its latest validation extensions. Most important impact is the extended operational lifetime of an existing reinforced concrete slab structure.</p>

Simulation of Low Velocity Impact Test on Carbon/Epoxy Composite Plates

2015 ◽  
Vol 1115 ◽  
pp. 523-526
Author(s):  
Ziamah B. Buang ◽  
S.M. Kashif
Keyword(s):  
Numerical Simulation ◽  
Finite Element Analysis ◽  
Finite Element ◽  
Composite Structures ◽  
Composite Plates ◽  
Matrix Cracking ◽  
Low Velocity Impact ◽  
Low Velocity ◽  
Element Analysis ◽  
Velocity Impact

Composite materials that have low weight and high strength properties are currently one of the promising materials for a vehicle’s body. However, the effect of low velocity impact on composite may cause failure through matrix cracking, fibre breakage and delamination which may reduce the structure strength. Low velocity impact can be analysed either by experimentation or numerical simulation. Numerical simulation which is also known as finite element analysis can show the degradation of the composite structure properties after an impact loading condition without doing any experimentation. Thus, in this paper, LS-DYNA is the finite element analysis software that is used to simulate a low velocity impact on composite structures.

Experimental and finite element analysis of curved composite structures with C-section

2016 ◽  
Vol 140 ◽  
pp. 106-117 ◽  
Author(s):  
Ji-Hyeon Kim ◽  
Khanh-Hung Nguyen ◽  
Jin-Ho Choi ◽  
Jin-Hwe Kweon
Keyword(s):  
Finite Element Analysis ◽  
Finite Element ◽  
Composite Structures ◽  
Element Analysis

scholarly journals Stochastic Finite Element Analysis of Composite Structures with Partially Restrained Connections under Earthquake Loads

2020 ◽  
Vol 9 (12) ◽  
pp. 147-152
Author(s):  
Özlem Çavdar
Keyword(s):  
Finite Element Analysis ◽  
Finite Element ◽  
Composite Structures ◽  
Structural Safety ◽  
Stochastic Dynamic ◽  
Stochastic Finite Element ◽  
Element Analysis ◽  
Analysis And Design ◽  
Stochastic Finite Element Analysis ◽  
Partially Restrained

The stochastic analysis of composite structures with partially restrained (PR) connections under seismic loads present some interesting and challenging issues to practicing engineers. This paper proposes an efficient, robust, and accurate method for stochastic finite element analysis of concrete–steel composite structures allowing for PR connections. These are followed by suitable numerical example which indicates that employment of such a stochastic finite element analysis. The Kocaeli earthquake in 1999 is considered as a ground motion. The connections parameters and material properties are random variables. It is essential to properly consider the PR connections in the stochastic dynamic analysis and design of the steel-concrete composite structures since design forces change significantly. The assumption that the connections are rigid, which is routinely used in the application, is not proper. The effect of the variability connection stiffness on the composite structures responses is sufficiently important for consideration in structural safety.

Sign in / Sign up

Export Citation Format

Share Document