Free vibration behavior of spinning shear-deformable plates composedof composite materials

AIAA Journal ◽  
1990 ◽  
Vol 28 (11) ◽  
pp. 1962-1970 ◽  
Author(s):  
R. Bhumbla ◽  
J. B. Kosmatka ◽  
J. N. Reddy
Keyword(s):  
Composite Materials ◽  
Free Vibration ◽  
Vibration Behavior ◽  
Shear Deformable ◽  
Shear Deformable Plates

Investigation on the free vibration behavior of sandwich conical shells with reinforced cores

2021 ◽  
pp. 109963622110204
Author(s):  
Mehdi Zarei ◽  
Gholamhossien Rahimi ◽  
Davoud Shahgholian-Ghahfarokhi
Keyword(s):  
Free Vibration ◽  
Orientation Angle ◽  
Element Model ◽  
Filament Winding ◽  
Vertex Angle ◽  
Sandwich Shell ◽  
Cross Sectional ◽  
Conical Shells ◽  
Vibration Behavior ◽  
Axial Forces

The free vibration behavior of sandwich conical shells with reinforced cores is investigated in the present study using experimental, analytical, and numerical methods. A new effective smeared method is employed to superimpose the stiffness contribution of skins with those of the stiffener in order to achieve equivalent stiffness of the whole structure. The stiffeners are also considered as a beam to support shear forces and bending moments in addition to the axial forces. Using Donnell’s shell theory and Galerkin method, the natural frequencies of the sandwich shell are subsequently derived. To validate analytical results, experimental modal analysis (EMA) is further conducted on the conical sandwich shell. For this purpose, a method is designed for manufacturing specimens through the filament winding process. For more validation, a finite element model (FEM) is built. The results revealed that all the validations were in good agreement with each other. Based on these analyses, the influence of the cross-sectional area of the stiffeners, the semi-vertex angle of the cone, stiffener orientation angle, and the number of stiffeners are investigated as well. The results achieved are novel and can be thus employed as a benchmark for further studies.

Dynamic Behavior of Aircraft Wings Modeled as Doubly-Tapered Composite Thin-Walled Beams

1999 ◽  
Author(s):  
Sungsoo Na ◽  
Liviu Librescu
Keyword(s):  
Composite Materials ◽  
Free Vibration ◽  
Dynamic Response ◽  
Dynamic Behavior ◽  
Transverse Shear ◽  
Dynamical Behavior ◽  
Time Dependent ◽  
Aircraft Wings ◽  
Helicopter Blades ◽  
Thin Walled

Abstract A study of the dynamical behavior of aircraft wings modeled as doubly-tapered thin-walled beams, made from advanced anisotropic composite materials, and incorporating a number of non-classical effects such as transverse shear, and warping inhibition is presented. The supplied numerical results illustrate the effects played by the taper ratio, anisotropy of constituent materials, transverse shear flexibility, and warping inhibition on free vibration and dynamic response to time-dependent external excitations. Although considered for aircraft wings, this analysis and results can be also applied to a large number of structures such as helicopter blades, robotic manipulator arms, space booms, tall cantilever chimneys, etc.

Sign in / Sign up

Export Citation Format

Share Document