Applications of a Counterflow Drag Reduction Technique in High-Speed Systems

2002 ◽  
Vol 39 (4) ◽  
pp. 605-614 ◽  
Author(s):  
Eswar Josyula ◽  
Mark Pinney ◽  
William B. Blake
Keyword(s):  
Drag Reduction ◽  
High Speed ◽  
Reduction Technique

scholarly journals Numerical Investigation on the Influence of the Streamlined Structures of the High-Speed Train’s Nose on Aerodynamic Performances

2021 ◽  
Vol 11 (2) ◽  
pp. 784
Author(s):  
Zhenxu Sun ◽  
Shuanbao Yao ◽  
Lianyi Wei ◽  
Yongfang Yao ◽  
Guowei Yang
Keyword(s):  
Drag Reduction ◽  
Pressure Distribution ◽  
Flow Separation ◽  
High Speed ◽  
Leeward Side ◽  
Detached Eddy Simulation ◽  
Side Force ◽  
Eddy Simulation ◽  
Delayed Detached Eddy Simulation ◽  
Asymmetrical Design

The structural design of the streamlined shape is the basis for high-speed train aerodynamic design. With use of the delayed detached-eddy simulation (DDES) method, the influence of four different structural types of the streamlined shape on aerodynamic performance and flow mechanism was investigated. These four designs were chosen elaborately, including a double-arch ellipsoid shape, a single-arch ellipsoid shape, a spindle shape with a front cowcatcher and a double-arch wide-flat shape. Two different running scenes, trains running in the open air or in crosswind conditions, were considered. Results reveal that when dealing with drag reduction of the whole train running in the open air, it needs to take into account how air resistance is distributed on both noses and then deal with them both rather than adjust only the head or the tail. An asymmetrical design is feasible with the head being a single-arch ellipsoid and the tail being a spindle with a front cowcatcher to achieve the minimum drag reduction. The single-arch ellipsoid design on both noses could aid in moderating the transverse amplitude of the side force on the tail resulting from the asymmetrical vortex structures in the flow field behind the tail. When crosswind is considered, the pressure distribution on the train surface becomes more disturbed, resulting in the increase of the side force and lift. The current study reveals that the double-arch wide-flat streamlined design helps to alleviate the side force and lift on both noses. The magnitude of side force on the head is 10 times as large as that on the tail while the lift on the head is slightly above that on the tail. Change of positions where flow separation takes place on the streamlined part is the main cause that leads to the opposite behaviors of pressure distribution on the head and on the tail. Under the influence of the ambient wind, flow separation occurs about distinct positions on the train surface and intricate vortices are generated at the leeward side, which add to the aerodynamic loads on the train in crosswind conditions. These results could help gain insight on choosing a most suitable streamlined shape under specific running conditions and acquiring a universal optimum nose shape as well.

Numerical study on the mechanism of drag reduction for interceptors on planning boats

2021 ◽  
Author(s):  
Lianzheng Cui ◽  
Zuogang Chen ◽  
Yukun Feng
Keyword(s):  
Drag Reduction ◽  
High Speed ◽  
Degrees Of Freedom ◽  
Numerical Study ◽  
Dynamic Pressure ◽  
Motion Model ◽  
Gauge Pressure ◽  
Reduction Effect ◽  
Pressure Resistance ◽  
Viscous Pressure

The drag reduction effect of interceptors on planning boats has been widely proven, but the mechanism of the effect has been rarely studied in terms of drag components, especially for spray resistance. The resistance was caused by the high gauge pressure under the boats transformed from the dynamic pressure, and it is the largest drag component in the high-speed planning mode. In this study, numerical simulations of viscous flow fields around a planning boat with and without interceptors were conducted. A two degrees of freedom motion model was employed to simulate the trim and sinkage. The numerical results were validated against the experimental data. The flow details with and without the interceptor were visualized and compared to reveal the underlying physics. A thinner and longer waterline could be achieved by the interceptor, which made the boat push the water away more gradually, and hence, the wave-making resistance could be decreased. The improved waterline also reduced the component of the freestream normal to the hull surface and led to the less transformed dynamic pressure, resulting in the lowAer spray resistance. Furthermore, the suppression of the flow separation could also be benefited from the interceptor; the viscous pressure resistance was therefore decreased.

Supersonic Bi-Directional Flying Wing Wave Drag Optimization Based on Alternative Form of CST Method

2013 ◽  
Vol 477-478 ◽  
pp. 240-245
Author(s):  
Xiaohui Guan
Keyword(s):  
Drag Reduction ◽  
High Speed ◽  
Wave Drag ◽  
Alternative Form ◽  
Shape Transformation ◽  
Flat Bottom ◽  
Symmetric Configuration ◽  
Shape Parameterization ◽  
Wave Drag Reduction ◽  
Sufficient Precision

Bi-directional Flying Wing (BFW) is a new supersonic civil transport shape concept that aims to meet the conflict requirements of high speed cruise and low speed take-off/landing missions. In this paper the Class-Shape-Transformation (CST) shape parameterization method is modified to represent the BFW shape, and new basis functions suitable for the BFW airfoil representation are constructed. The Far-field Composite Element (FCE) wave drag optimization is performed on both the flat bottom and symmetric BFW configurations, and the drag reduction effects and result precision are surveyed. It is suggested that significant wave drag reduction can be achieved by the FCE optimization for both the flat bottom and the symmetric BFW configurations. The wave drag coefficients with sufficient precision can be obtained in the FCE optimization of the symmetric configuration; while the FCE optimization results of the flat bottom one are not accurate enough.

Stability Enhancement of Supercavitating Projectiles by Unsteady Air Injection

2005 ◽  
Author(s):  
Yasmin Khakpour ◽  
Miad Yazdani
Keyword(s):  
Numerical Simulation ◽  
Drag Reduction ◽  
High Speed ◽  
The Body ◽  
Air Injection ◽  
Cavity Surface ◽  
The Stability ◽  
Stability Enhancement

In this work, numerical simulation is used to study the stability enhancement of high speed supercavitating hydrofoils. Although supercavitation is known as one of the most effective methods for drag reduction, producing the cavity, either by ventilation or by cavitator at front of the body, may cause some instabilities on cavity surface and thus on the projectile’s motion. Therefore removing these instabilities comes as an important point of discussion. First of all, we calculate the sources of instabilities and measure respective forces and then present some approaches that significantly reduce these instabilities. One of these methods that could produce more stable supercavities is injecting of the air into the cavity unsteadily which varies through the projectile’s surface. This approach is provided by arrays of slots distributed on the projectile’s surface and unsteady injection is modeled over the surface. Furthermore, the position of ventilation, dramatically affects the stability like those in aerodynamics. In all approaches it is assumed that the supercavity covers the whole of the body, however the forces caused by the wakes, formed behind the body are taken into account. The calculation is performed at three cavitation numbers with respective velocities of 40 m/s, 50 m/s, 60 m/s.

scholarly journals Turbulent channel flow over an anisotropic porous wall – drag increase and reduction

2018 ◽  
Vol 842 ◽  
pp. 381-394 ◽  
Author(s):  
Marco E. Rosti ◽  
Luca Brandt ◽  
Alfredo Pinelli
Keyword(s):  
Drag Reduction ◽  
Channel Flow ◽  
High Speed ◽  
Vertical Direction ◽  
Porous Wall ◽  
Turbulent Channel Flow ◽  
Spanwise Direction ◽  
Normal Velocity ◽  
Porous Walls ◽  
The One

The effect of the variations of the permeability tensor on the close-to-the-wall behaviour of a turbulent channel flow bounded by porous walls is explored using a set of direct numerical simulations. It is found that the total drag can be either reduced or increased by more than 20 % by adjusting the permeability directional properties. Drag reduction is achieved for the case of materials with permeability in the vertical direction lower than the one in the wall-parallel planes. This configuration limits the wall-normal velocity at the interface while promoting an increase of the tangential slip velocity leading to an almost ‘one-component’ turbulence where the low- and high-speed streak coherence is strongly enhanced. On the other hand, strong drag increase is found when high wall-normal and low wall-parallel permeabilities are prescribed. In this condition, the enhancement of the wall-normal fluctuations due to the reduced wall-blocking effect triggers the onset of structures which are strongly correlated in the spanwise direction, a phenomenon observed by other authors in flows over isotropic porous layers or over ribletted walls with large protrusion heights. The use of anisotropic porous walls for drag reduction is particularly attractive since equal gains can be achieved at different Reynolds numbers by rescaling the magnitude of the permeability only.

Flow Around Rectangular Cylinders With Trailing Jets

2004 ◽  
Author(s):  
Srikanth B. Pidugu
Keyword(s):  
Drag Reduction ◽  
High Speed ◽  
Subject Area ◽  
Circular Cylinders ◽  
Bluff Bodies ◽  
Stagnation Region ◽  
Speed Flow ◽  
Commercial Code ◽  
Considerable Work ◽  
Rectangular Cylinders

The problem of flow past bluff bodies was studied extensively in the past. The problem of drag reduction is very important in many high speed flow applications. Considerable work has been done in this subject area in case of circular cylinders. The present study attempts to investigate the feasibility of drag reduction on a rectangular cylinder by flow injection from the rear stagnation region. The physical problem is modeled as two-dimensional body and numerical analysis is carried out with and without trailing jets. A commercial code is used for this purpose. Unsteady computation is performed in case of rectangular cylinders with no trailing jets where as steady state computation is performed when jet is introduced. It is found that drag can be reduced by introducing jets with small intensity in rear stagnation region of the rectangular cylinders.

Sign in / Sign up

Export Citation Format

Share Document