Improved Semi-Empirical Method for Power-On Base-Drag Prediction

2002 ◽  
Vol 39 (1) ◽  
pp. 56-65 ◽  
Author(s):  
F. G. Moore ◽  
T. C. Hymer
Keyword(s):  
Empirical Method ◽  
Drag Prediction ◽  
Semi Empirical ◽  
Base Drag

scholarly journals IMPLEMENTATION OF SEMI-EMPIRICAL MODELS TO ENHANCE THE ACCURACY OF PANEL METHODS FOR DRAG PREDICTION AT SUPERSONIC SPEEDS

2011 ◽  
Vol 12 (3) ◽  
Author(s):  
Abdulkareem Shafiq Mahdi Al-Obaidi
Keyword(s):  
Computer Program ◽  
Panel Method ◽  
Preliminary Design ◽  
Empirical Methods ◽  
Average Value ◽  
Panel Methods ◽  
Drag Prediction ◽  
Stall Angle ◽  
Semi Empirical ◽  
Base Drag

This paper introduces an attempt to enhance the accuracy of panel methods. A low-order panel method is selected and coupled with semi-empirical methods to enhance the accuracy of drag prediction of flying bodies at supersonic speeds. The semi-empirical methods are used to improve the accuracy of drag prediction by mathematical modelling of viscosity, base drag, and drag due to wing-body interference. Both methods were implemented by a computer program and validated against experimental and analytical results. The comparisons show that a considerable improvement has been achieved for the selected panel method for prediction of drag coefficients. In general, accuracy within an average value of -4.4% was obtained for the enhanced panel method. Such accuracy could be considered acceptable for the preliminary design stages of supersonic flying bodies such as projectiles and missiles. The developed computer program gives satisfactory results as long as the considered configurations are slender and the angles of attack are small (below stall angle).  ABSTRAK: Kertas kerja ini memperkenalkan percubaan untuk  mempertingkatkan ketepatan kaedah panel. Kaedah panel tertib rendah telah dipilih dan digabungkan dengan kaedah separa empirik untuk mempertingkatkan ketepatan ramalan seret objek terbang pada kelajuan supersonik. Kaedah semi empirikal yang digunakan untuk meningkatkan ketepatan jangkaan seret menggunakan model matematik bagi kelikatan, seretan dasar, dan  seretan disebabkan  oleh badan sayap interferens. Kedua-dua kaedah dijalankan menggunakan program komputer dan disah berdasarkan keputusan uji kaji dan analisis. Perbandingan keputusan menunjukkan peningkatan yang mendadak diperolehi melalui kaedah panel yang telah dipilih sebagai jangkaan pekali seret. Secara umumnya, ketepatan yang melingkungi nilai purata sebanyak -4.4% telah diperolehi daripada kaedah peningkatan panel. Keputusan sebegini boleh diterima untuk peringkat reka bentuk permulaan bagi objek terbang supersonik seperti projektil dan misil. Program komputer yang direka memberikan keputusan yang memuaskan selagi konfigurasi yang dipilih adalah kecil dan sudut serangan adalah rendah (di bawah sudut tegun).

Modeling the Effects of O-sulfonation on the CID of Serine

2020 ◽  
Author(s):  
Kenneth Lucas ◽  
George Barnes
Keyword(s):  
Sulfo Group ◽  
High Energy ◽  
Empirical Method ◽  
Side Chain ◽  
Energy Structure ◽  
Direct Dynamics ◽  
Theoretical Mass ◽  
Intermolecular Proton Transfer ◽  
Dynamics Simulations ◽  
Semi Empirical

We present the results of direct dynamics simulations and DFT calculations aimed at elucidating the effect of \textit{O}-sulfonation on the collision induced dissociation for serine. Towards this end, direct dynamics simulations of both serine and sulfoserine were performed at multiple collision energies and theoretical mass spectra obtained. Comparisons to experimental results are favorable for both systems. Peaks related to the sulfo group are identified and the reaction dynamics explored. In particular, three significant peaks (m\z 106, 88, and 81) seen in the theoretical mass spectrum directly related to the sulfo group are analyzed as well as major peaks shared by both systems. Our analysis shows that the m\z 106 peaks result from intramolecular rearrangements, intermolecular proton transfer among complexes composed of initial fragmentation products, and at high energy side-chain fragmentation. The \mz 88 peak was found to contain multiple constitutional isomers, including a previously unconsidered, low energy structure. It was also seen that the RM1 semi empirical method was not able to obtain all of the major peaks seen in experiment for sulfoserine. In contrast, PM6 did obtain all major experimental peaks.

Theoretical investigation of Ramachandran plot of N-formyl-L-alanine-amide

2019 ◽  
Author(s):  
Chem Int
Keyword(s):  
Genetic Algorithm ◽  
Theoretical Investigation ◽  
Energy Analysis ◽  
Empirical Method ◽  
Conformational Space ◽  
Ramachandran Plot ◽  
Global Minima ◽  
Reasonable Time ◽  
Semi Empirical

The full conformational space of N-formyl-L-alanine-amide was explored by the semi-empirical method AM1 coupled to the Multi Niche Crowding (MNC) genetic algorithm implemented in a package of programs developed in our laboratory. The structural and energy analysis of the resulting conformational space E(,ψ) exhibits 5 regions or minima ɣL, ɣD, ɛL, D and αD. The technique provides better detection of local and global minima within a reasonable time.

scholarly journals How Good Is the STW Sensor? An Account from a Larger Shipping Company

2021 ◽  
Vol 9 (5) ◽  
pp. 465
Author(s):  
Angelos Ikonomakis ◽  
Ulrik Dam Nielsen ◽  
Klaus Kähler Holst ◽  
Jesper Dietz ◽  
Roberto Galeazzi
Keyword(s):  
High Frequency ◽  
Additional Data ◽  
Empirical Method ◽  
Influential Factor ◽  
Sensor Data ◽  
Sea State ◽  
Shipping Company ◽  
Frequency Sensor ◽  
Semi Empirical

This paper examines the statistical properties and the quality of the speed through water (STW) measurement based on data extracted from almost 200 container ships of Maersk Line’s fleet for 3 years of operation. The analysis uses high-frequency sensor data along with additional data sources derived from external providers. The interest of the study has its background in the accuracy of STW measurement as the most important parameter in the assessment of a ship’s performance analysis. The paper contains a thorough analysis of the measurements assumed to be related with the STW error, along with a descriptive decomposition of the main variables by sea region including sea state, vessel class, vessel IMO number and manufacturer of the speed-log installed in each ship. The paper suggests a semi-empirical method using a threshold to identify potential error in a ship’s STW measurement. The study revealed that the sea region is the most influential factor for the STW accuracy and that 26% of the ships of the dataset’s fleet warrant further investigation.

scholarly journals A semi-empirical method for predicting GOC in oil reservoirs with limited PVT dataset

2020 ◽  
Vol 2 (7) ◽  
Author(s):  
Oluchukwu M. Okoh ◽  
Kazeem A. Lawal ◽  
Asekhame U. Yadua ◽  
Mathilda I. Ovuru ◽  
Stella I. Eyitayo ◽  
...  
Keyword(s):  
Empirical Method ◽  
Oil Reservoirs ◽  
Semi Empirical

A semi-empirical method for the calculation of the electronic structure of glass

1970 ◽  
Vol 2 (4) ◽  
pp. 865-874 ◽  
Author(s):  
I. V. Abarenkov ◽  
A. V. Amosov ◽  
V. F. Bratsev ◽  
D. M. Yudin
Keyword(s):  
Electronic Structure ◽  
Empirical Method ◽  
Semi Empirical
Sign in / Sign up

Export Citation Format

Share Document