Development of Magnetohydrodynamic Avionics Cooling Using Complex Structures Realized Through Additive Manufacturing

2021 ◽  
pp. 1-14
Author(s):  
Jerald Armen ◽  
Hugh A. Bruck
Keyword(s):  
Additive Manufacturing ◽  
Complex Structures

scholarly journals Additive Manufacturing Under Lunar Gravity and Microgravity

2021 ◽  
Vol 33 (2) ◽  
Author(s):  
B. Reitz ◽  
C. Lotz ◽  
N. Gerdes ◽  
S. Linke ◽  
E. Olsen ◽  
...  
Keyword(s):  
Additive Manufacturing ◽  
Spare Parts ◽  
Manufacturing Processes ◽  
Complex Structures ◽  
Lunar Gravity ◽  
Limited Extent ◽  
Test Environment ◽  
Manufacturing Tests ◽  
Laser Experiments ◽  
Materials Used

AbstractMankind is setting to colonize space, for which the manufacturing of habitats, tools, spare parts and other infrastructure is required. Commercial manufacturing processes are already well engineered under standard conditions on Earth, which means under Earth’s gravity and atmosphere. Based on the literature review, additive manufacturing under lunar and other space gravitational conditions have only been researched to a very limited extent. Especially, additive manufacturing offers many advantages, as it can produce complex structures while saving resources. The materials used do not have to be taken along on the mission, they can even be mined and processed on-site. The Einstein-Elevator offers a unique test environment for experiments under different gravitational conditions. Laser experiments on selectively melting regolith simulant are successfully conducted under lunar gravity and microgravity. The created samples are characterized in terms of their geometry, mass and porosity. These experiments are the first additive manufacturing tests under lunar gravity worldwide.

scholarly journals 4D Printing: A Review on Recent Progresses

Micromachines ◽  
2020 ◽  
Vol 11 (9) ◽  
pp. 796 ◽  
Author(s):  
Honghui Chu ◽  
Wenguang Yang ◽  
Lujing Sun ◽  
Shuxiang Cai ◽  
Rendi Yang ◽  
...  
Keyword(s):  
Additive Manufacturing ◽  
3D Printing ◽  
Three Dimensional ◽  
Complex Structures ◽  
Future Prospects ◽  
4D Printing ◽  
Stimulation Method ◽  
Shape Property ◽  
External Stimuli

Since the late 1980s, additive manufacturing (AM), commonly known as three-dimensional (3D) printing, has been gradually popularized. However, the microstructures fabricated using 3D printing is static. To overcome this challenge, four-dimensional (4D) printing which defined as fabricating a complex spontaneous structure that changes with time respond in an intended manner to external stimuli. 4D printing originates in 3D printing, but beyond 3D printing. Although 4D printing is mainly based on 3D printing and become an branch of additive manufacturing, the fabricated objects are no longer static and can be transformed into complex structures by changing the size, shape, property and functionality under external stimuli, which makes 3D printing alive. Herein, recent major progresses in 4D printing are reviewed, including AM technologies for 4D printing, stimulation method, materials and applications. In addition, the current challenges and future prospects of 4D printing were highlighted.

Scalable submicrometer additive manufacturing

Science ◽  
2019 ◽  
Vol 366 (6461) ◽  
pp. 105-109 ◽  
Author(s):  
Sourabh K. Saha ◽  
Dien Wang ◽  
Vu H. Nguyen ◽  
Yina Chang ◽  
James S. Oakdale ◽  
...  
Keyword(s):  
Additive Manufacturing ◽  
Design Space ◽  
Three Dimensional ◽  
Complex Structures ◽  
Layer By Layer ◽  
Promising Candidate ◽  
Single Digit ◽  
Cross Sectional ◽  
Two Photon ◽  
Nanoscale Features

High-throughput fabrication techniques for generating arbitrarily complex three-dimensional structures with nanoscale features are desirable across a broad range of applications. Two-photon lithography (TPL)–based submicrometer additive manufacturing is a promising candidate to fill this gap. However, the serial point-by-point writing scheme of TPL is too slow for many applications. Attempts at parallelization either do not have submicrometer resolution or cannot pattern complex structures. We overcome these difficulties by spatially and temporally focusing an ultrafast laser to implement a projection-based layer-by-layer parallelization. This increases the throughput up to three orders of magnitude and expands the geometric design space. We demonstrate this by printing, within single-digit millisecond time scales, nanowires with widths smaller than 175 nanometers over an area one million times larger than the cross-sectional area.

Design and Fabrication of Structural Connections Using Bi-Directional Evolutionary Structural Optimization and Additive Manufacturing

2016 ◽  
Vol 846 ◽  
pp. 571-576 ◽  
Author(s):  
Hamed Seifi ◽  
Mike Xie ◽  
James O’Donnell ◽  
Nicholas Williams
Keyword(s):  
Additive Manufacturing ◽  
Structural Optimization ◽  
Large Scale ◽  
Limited Area ◽  
Complex Structures ◽  
Evolutionary Structural Optimization ◽  
3D Printed ◽  
Structural Connections ◽  
Definition Of ◽  
Processing Steps

The need to simplify the construction issues of complex structures leads to definition of SmartNodes project as a research which aims to confine the complexity of structure to a limited area (nodes) in order to decrease processing steps and labor intensity by application of additive manufacturing (AM) techniques. Bi-Directional Evolutionary Structural Optimization (BESO) is used to design efficient and elegant nodal connections of large scale spatial structures and minimise the volume of nodes to be printed and to ultimately replace welded, forged and cast connections by 3D printed connections. The prototypes discussed in this paper demonstrate BESO design process through two generic cases.

scholarly journals Property Analysis of Photo-Polymerization-Type 3D-Printed Structures Based on Multi-Composite Materials

2021 ◽  
Vol 11 (18) ◽  
pp. 8545
Author(s):  
So-Ree Hwang ◽  
Min-Soo Park
Keyword(s):  
Mechanical Properties ◽  
Additive Manufacturing ◽  
Composite Materials ◽  
3D Printing ◽  
Bending Test ◽  
3D Printer ◽  
Complex Structures ◽  
Photo Polymerization ◽  
Anisotropic Structures ◽  
3D Printed

Additive manufacturing, commonly called 3D printing, has been studied extensively because it can be used to fabricate complex structures; however, polymer-based 3D printing has limitations in terms of implementing certain functionalities, so it is limited in the production of conceptual prototypes. As such, polymer-based composites and multi-material 3D printing are being studied as alternatives. In this study, a DLP 3D printer capable of printing multiple composite materials was fabricated using a movable separator and structures with various properties were fabricated by selectively printing two composite materials. After the specimen was fabricated based on the ASTM, the basic mechanical properties of the structure were compared through a 3-point bending test and a ball rebound test. Through this, it was shown that structures with various mechanical properties can be fabricated using the proposed movable-separator-based DLP process. In addition, it was shown that this process can be used to fabricate anisotropic structures, whose properties vary depending on the direction of the force applied to the structure. By fabricating multi-joint grippers with varying levels of flexibility, it was shown that the proposed process can be applied in the fabrication of soft robots as well.

Complex Structures in Microwave Circuits by Using Additive Manufacturing Techniques

2019 ◽  
Author(s):  
Hector Garcia-Martinez ◽  
German Torregrosa-Penalva ◽  
Ernesto Avila-Navarro ◽  
Angela Coves-Soler ◽  
Enrique Bronchalo
Keyword(s):  
Additive Manufacturing ◽  
Microwave Circuits ◽  
Complex Structures ◽  
Manufacturing Techniques

scholarly journals A Short Review on the Microstructure, Transformation Behavior and Functional Properties of NiTi Shape Memory Alloys Fabricated by Selective Laser Melting

Materials ◽  
2018 ◽  
Vol 11 (9) ◽  
pp. 1683 ◽  
Author(s):  
Xiebin Wang ◽  
Sergey Kustov ◽  
Jan Van Humbeeck
Keyword(s):  
Mechanical Properties ◽  
Additive Manufacturing ◽  
Shape Memory Alloys ◽  
Shape Memory ◽  
Selective Laser Melting ◽  
Functional Properties ◽  
Complex Structures ◽  
Transformation Behavior ◽  
Laser Melting ◽  
Niti Shape Memory Alloys

Due to unique functional and mechanical properties, NiTi shape memory alloys are one of the most promising metallic functional materials. However, the poor workability limits the extensive utilization of NiTi alloys as components of complex shapes. The emerging additive manufacturing techniques provide high degrees of freedom to fabricate complex structures. A freeform fabrication of complex structures by additive manufacturing combined with the unique functional properties (e.g., shape memory effect and superelasticity) provide great potential for material and structure design, and thus should lead to numerous applications. In this review, the unique microstructure that is generated by selective laser melting (SLM) is discussed first. Afterwards, the previously reported transformation behavior and mechanical properties of NiTi alloys produced under various SLM conditions are summarized.

scholarly journals A Comparative Study between Polymer and Metal Additive Manufacturing Approaches in Investigating Stiffened Hexagonal Cells

Materials ◽  
2021 ◽  
Vol 14 (4) ◽  
pp. 883
Author(s):  
Othman Laban ◽  
Elsadig Mahdi ◽  
Samahat Samim ◽  
John-John Cabibihan
Keyword(s):  
Additive Manufacturing ◽  
Failure Modes ◽  
Fused Deposition Modelling ◽  
Complex Structures ◽  
Metal Additive Manufacturing ◽  
Fused Deposition ◽  
Base Materials ◽  
Load Carrying ◽  
Manufacturing Technologies ◽  
Metal Additive

Recent polymer and metal additive manufacturing technologies were proven capable of building complex structures with high accuracy. Although their final products differ significantly in terms of mechanical properties and building cost, many structural optimization studies were performed with either one without systematic justification. Therefore, this study investigated whether the Direct Metal Laser Sintering (DMLS) and Fused Deposition Modelling (FDM) methodologies can provide similar conclusions when performing geometrical manipulations for optimizing structural crashworthiness. Two identical sets of four shapes of stiffened hexagonal cells were built and crushed under quasi-static loading. The results were compared in terms of collapsing behavior, load-carrying performance, and energy-absorption capability. Although the observed failure modes were different since the base-materials differ, similar improvement trends in performance were observed between both fabrication approaches. Therefore, FDM was recommended as a fabrication method to optimize thin-walled cellular hexagonal parameters since it was 80% more time-efficient and 53.6% cheaper than the DMLS technique.

Sign in / Sign up

Export Citation Format

Share Document