scholarly journals Effect of Film Cooling on Entropy Noise Generation in a Stator Blade Row

AIAA Journal ◽  
2021 ◽  
pp. 1-16
Author(s):  
Thomas Bach ◽  
Maxime Huet ◽  
Rob Watson ◽  
Stephen Spence ◽  
Yasser Mahmoudi
Keyword(s):  
Film Cooling ◽  
Noise Generation ◽  
Blade Row ◽  
Stator Blade

Simulation of Unsteady Flows in Intermediate Pressure Steam Turbine with Cutback Stator Blade Row

2020 ◽  
Vol 2020 (0) ◽  
pp. J05102
Author(s):  
Hironori MIYAZAWA ◽  
Akihiro UEMURA ◽  
Takashi FURUSAWA ◽  
Satoru YAMAMOTO ◽  
Shuichi UMEZAWA ◽  
...  
Keyword(s):  
Steam Turbine ◽  
Unsteady Flows ◽  
Intermediate Pressure ◽  
Blade Row ◽  
Pressure Steam ◽  
Stator Blade

scholarly journals Control of the Unsteady Flow in a Stator Blade Row Interacting With Upstream Moving Wakes

1993 ◽  
Author(s):  
T. Valkov ◽  
C. S. Tan
Keyword(s):  
Unsteady Flow ◽  
Pressure Fluctuations ◽  
Spectral Element ◽  
Navier Stokes ◽  
Suction Surface ◽  
Model Calculations ◽  
Blade Loading ◽  
Pressure Surface ◽  
Blade Row ◽  
Stator Blade

A computational approach, based on a spectral-element Navier-Stokes solver, has been applied to the study of the unsteady flow arising from wake-stator interaction. Direct, as well as turbulence-model calculations, provide insight into the mechanics of the unsteady flow and demonstrate the potential for controlling its effects. The results show that the interaction between the wakes and the stator blades produces a characteristic pattern of vortical disturbances, which have been correlated to the pressure fluctuations. Within the stator passage, the wakes migrate towards the pressure surface where they evolve into counter-rotating vortices. These vortices are the dominant source of disturbances over the pressure surface of the stator blade. Over the suction surface of the stator blade, the disturbances are due to the distortion and detachment of boundary layer fluid. They can be reduced by tailoring the blade loading or by applying non-uniform suction.

Control of Shroud Leakage Loss by Reducing Circumferential Mixing

2008 ◽  
Vol 130 (2) ◽  
Author(s):  
Budimir Rosic ◽  
John D. Denton
Keyword(s):  
Significant Proportion ◽  
Tangential Velocity ◽  
Secondary Flows ◽  
Main Stream ◽  
Leakage Flow ◽  
Flow Angle ◽  
Blade Row ◽  
Stator Blade ◽  
The Difference ◽  
Mixing Losses

Shroud leakage flow undergoes little change in the tangential velocity as it passes over the shroud. Mixing due to the difference in tangential velocity between the main stream flow and the leakage flow creates a significant proportion of the total loss associated with shroud leakage flow. The unturned leakage flow also causes negative incidence and intensifies the secondary flows in the downstream blade row. This paper describes the experimental results of a concept to turn the rotor shroud leakage flow in the direction of the main blade passage flow in order to reduce the aerodynamic mixing losses. A three-stage air model turbine with low aspect ratio blading was used in this study. A series of different stationary turning vane geometries placed into the rotor shroud exit cavity downstream of each rotor blade row was tested. A significant improvement in flow angle and loss in the downstream stator blade rows was measured together with an increase in turbine brake efficiency of 0.4 %.

Discrete Frequency Noise Generation From an Axial Flow Fan Blade Row

1970 ◽  
Vol 92 (1) ◽  
pp. 37-43 ◽  
Author(s):  
Ramani Mani
Keyword(s):  
Three Dimensional ◽  
Axial Flow ◽  
Acoustic Energy ◽  
Frequency Noise ◽  
Noise Generation ◽  
Two Dimensional ◽  
Axial Flow Fan ◽  
Fan Noise ◽  
Blade Row ◽  
Fan Blade

An analysis is presented which treats the noise generation from an axial flow fan row by given forces including the effects of a moving medium. The linearization of Euler’s equations to yield tractable problems for fan noise is discussed. The three-dimensional problem is decomposed into several two-dimensional problems. Finally, full details are given of a two-dimensional analysis to predict the amounts of acoustic energy, at the blade passing frequency and its harmonics, radiated up and downstream of a blade row due to its interaction with a neighboring row.

The ultra-high efficiency gas turbine engine, UHEGT, Part II: A numerical study on reducing the stator blade surface temperature by indexing fuel injectors and using film cooling

2020 ◽  
pp. 095765092097353
Author(s):  
Seyed M Ghoreyshi ◽  
Meinhard T Schobeiri
Keyword(s):  
Surface Temperature ◽  
Gas Turbine ◽  
Film Cooling ◽  
Total Pressure ◽  
High Efficiency ◽  
Combustion Process ◽  
Blade Surface ◽  
Turbine Engine ◽  
Fuel Injectors ◽  
Stator Blade

In the Ultra-High Efficiency Gas Turbine Engine, UHEGT (introduced in our previous studies) the combustion process is no longer contained in isolation between the compressor and turbine, rather distributed within the axial gaps before each stator row. This technology substantially increases the thermal efficiency of the engine cycle to above 45%, increases power output, and reduces turbine inlet temperature. Since the combustion process is brought into the turbine stages in UHEGT, the stator blades are exposed to high-temperature gases and can be overheated. To address this issue and reduce the temperature on the stator blade surface, two different approaches are investigated in this paper. The first is indexing (clocking) of the fuel injectors (cylindrical tubes extended from hub to shroud), in which the positions of the injectors are adjusted relative to each other and the stator blades. The second is film cooling, in which cooling holes are placed on the blade surface to bring down the temperature via coolant injection. Four configurations are designed and studied via computational fluid dynamics (CFD) to evaluate the effectiveness of the two approaches. Stator blade surface temperature (as the main objective function) along with other performance parameters such as temperature non-uniformity at rotor inlet, total pressure loss over the injectors, and total power production by rotor are evaluated for all configurations. The results show that indexing presents the most promising approach in reducing the stator blade surface temperature while producing the least amount of total pressure loss.

Integrated Motor/Propulsor Duct Optimization for Increased Vehicle and Propulsor Performance

2011 ◽  
Vol 133 (4) ◽  
Author(s):  
Stephen A. Huyer ◽  
Amanda Dropkin
Keyword(s):  
Fluid Dynamics ◽  
Computational Study ◽  
Mean Flow ◽  
Design Constraint ◽  
Propulsive Efficiency ◽  
Flow Acceleration ◽  
Blade Row ◽  
Total Vehicle ◽  
Stator Blade ◽  
Thrust And Torque

This paper presents a computational study to better understand the underlying fluid dynamics associated with various duct shapes and the resultant impact on both total vehicle drag and propulsor efficiency. A post-swirl propulsor configuration (downstream stator blade row) was selected with rotor and stator blade number kept constant. A generic undersea vehicle hull shape was chosen and the maximum shroud radius was required to lie within this body radius. A cylindrical rim-driven electric motor capable of generating a specific horsepower to achieve the design operational velocity required a set volume that established a design constraint limiting the shape of the duct. Individual duct shapes were designed to produce constant flow acceleration from upstream of the rotor blade row to downstream of the stator blade row. Ducts producing accelerating and decelerating flow were systematically examined. The axisymmetric Reynolds Averaged Navier–Stokes (RANS) version of fluent® was used to study the fluid dynamics associated with a range of accelerated and decelerated duct flow cases as well as provide the base total vehicle drag. For each given duct shape, the propeller blade design code, PBD 14.3, was used to generate an optimized rotor and stator. To provide fair comparisons, the maximum rotor radius was held constant with similar circulation distributions intended to generate equivalent amounts of thrust. Computations predicted that minimum vehicle drag was produced with a duct that produced zero mean flow acceleration. Ducted designs generating accelerating or decelerating flow increased drag. However, propulsive efficiency based exclusively on blade thrust and torque was significantly increased for accelerating flow through the duct and reduced for decelerating flow cases. Full 3D RANS flow simulations were then conducted for select test cases to quantify the specific blade, hull, and shroud forces and highlight the increased component drag produced by an operational propulsor, which reduced overall propulsive efficiency. From these results, a final optimized design was proposed.

Experimental Study on Film Cooling Flow Characteristics of Turbine Stator Blade at Different Setting Angles

2012 ◽  
Vol 614-615 ◽  
pp. 592-595
Author(s):  
Ling Zhang ◽  
Hai Rui Dong ◽  
Guo Liang Wen
Keyword(s):  
Film Cooling ◽  
Effective Means ◽  
Turbine Blades ◽  
Flow Characteristics ◽  
Suction Side ◽  
Pressure Side ◽  
Blowing Ratio ◽  
Turbine Stator ◽  
Setting Angle ◽  
Stator Blade

The technology of film cooling is one of the most effective means of protecting the turbine blades. In this paper, flow structures of the turbine stator blade with six hole-rows at different blowing ratio（M=0.5, 1.0 and 1.5）and setting angles（β=40°, 50°, 60°, 70°, 80° and 90°） was measured by PIV in piston flow type of low-speed wind tunnel laboratory. Velocity was analyzed. Results show that: velocity gradient of suction side was much higher than pressure side and increased with setting angle reduction; Adherence of film is influenced by setting angle and blowing ratio, when M=1.0 and β=70° anchorage dependent is best and suction side is greater than pressure side.

A Comparison Between the Design Point and Near-Stall Performance of an Axial Compressor

1990 ◽  
Vol 112 (1) ◽  
pp. 109-115 ◽  
Author(s):  
N. M. McDougall
Keyword(s):  
Rotor Blade ◽  
Three Dimensional ◽  
Axial Compressor ◽  
Pressure Rise ◽  
Tip Clearance ◽  
Tip Clearance Flow ◽  
Design Point ◽  
Blade Row ◽  
Clearance Flow ◽  
Stator Blade

Detailed measurements have been made within an axial compressor operating both at design point and near stall. Rotor tip clearance was found to control the performance of the machine by influencing the flow within the rotor blade passages. This was not found to be the case in the stator blade row, where hub clearance was introduced beneath the blade tips. Although the passage flow was observed to be altered dramatically, no significant changes were apparent in the overall pressure rise or stall point. Small tip clearances in the rotor blade row resulted in the formation of corner separations at the hub, where the blade loading was highest. More representative clearances resulted in blockage at the tip due to the increased tip clearance flow. The effects that have been observed emphasize both the three-dimensional nature of the flow within compressor blade passages, and the importance of the flow in the endwall regions in determining the overall compressor performance.

Sign in / Sign up

Export Citation Format

Share Document