scholarly journals Aerodynamic Performance and Surface Flow Structures of Leading-Edge Tubercled Tapered Swept-Back Wings

AIAA Journal ◽  
2018 ◽  
Vol 56 (1) ◽  
pp. 423-431 ◽  
Author(s):  
Zhaoyu Wei ◽  
T. H. New ◽  
Y. D. Cui
Keyword(s):  
Leading Edge ◽  
Aerodynamic Performance ◽  
Surface Flow ◽  
Flow Structures

Effects of an Upstream Cavity on the Secondary Flow in a Transonic Turbine Cascade

2010 ◽  
Author(s):  
H. M. Abo El Ella ◽  
S. A. Sjolander ◽  
T. J. Praisner
Keyword(s):  
Mach Number ◽  
Secondary Flow ◽  
Ultra Violet ◽  
Leading Edge ◽  
Reactive Dye ◽  
Surface Flow ◽  
Flow Structures ◽  
Pressure Probe ◽  
Turbine Cascade ◽  
Blow Down

This paper examines experimentally the effects of an upstream cavity on the flow structures and secondary losses in a transonic linear turbine cascade. The cavity approximates the endwall geometry resulting from the platform overlap at the interface between stationary and rotating turbine blade rows. Previous investigations of the effects of upstream cavity geometries have been conducted mainly at low-speed conditions. The present work aims to extend such research into the transonic regime with a more engine representative upstream platform geometry. The investigations were carried out in a blow-down type wind tunnel. The cavity is located at 30% of axial-chord from the leading edge, extends 17% of axial-chord in depth, and is followed by a smooth ramp to return the endwall to its nominal height. Two cascades are examined for the same blade geometry: the baseline cascade with a flat endwall and the cascade with the cavity endwall. Measurements were made at the design incidence and the outlet design Mach number of 0.80. At this condition, the Reynolds number based on outlet velocity is about 600,000. Off-design outlet Mach numbers of 0.69, and 0.89 were also investigated. Flowfield measurements were carried out at 40% axial-chord downstream of the trailing edge, using a seven-hole pressure probe, to quantify losses and identify the flow structures. Additionally, surface flow visualization using an ultra-violet reactive dye was employed at the design Mach number, on the endwall and blade surfaces, to help in the interpretation of the flow physics. The experimental results also include blade-loading distributions, and the probe measurements were processed to obtain total-pressure loss coefficients, and stream-wise vorticity distributions. It was found that the presence of the upstream cavity noticeably altered the structure and the strength of the secondary flow. Some effect on the secondary losses was also evident, with the cavity having a larger effect at the higher Mach number.

Influence of a Novel Three-Dimensional Leading Edge Geometry on the Aerodynamic Performance of Transonic Cascade Vanes

2012 ◽  
Author(s):  
D. Bouchard ◽  
A. Asghar ◽  
J. Hardes ◽  
R. Edwards ◽  
W. D. E. Allan ◽  
...  
Keyword(s):  
Total Pressure ◽  
Three Dimensional ◽  
Leading Edge ◽  
Aerodynamic Performance ◽  
Surface Flow ◽  
Pressure Losses ◽  
Low Pressure Turbine ◽  
Edge Geometry ◽  
Turbine Vane ◽  
Transonic Cascade

This paper addresses the issue of aerodynamic performance of a novel 3D leading edge modification to a reference vane. An analysis of tubercles found in nature and some engineering applications was used to synthesize new leading edge geometry. Three variations of the reference low pressure turbine vane were obtained by changing the characteristic parameters of the tubercles. Shock structure, surface flow visualization and total pressure measurements were made through experiments in a cascade rig, as well as through computational fluid dynamics. The tests were carried out at design zero incidence and off-design ±10-deg and ±5-deg incidences. The performance of the new 3D leading edge geometries was compared against the reference vane. Some leading edge tubercle configurations were effective at decreasing total pressure losses at positive inlet incidence angles. Numerical results supplemented experimental results.

Aerodynamic Performance of Turbine Center Frames With Purge Flows—Part I: The Influence of Turbine Purge Flow Rates

2018 ◽  
Vol 140 (6) ◽  
Author(s):  
Stefan Zerobin ◽  
Andreas Peters ◽  
Sabine Bauinger ◽  
Ashwini Bhadravati Ramesh ◽  
Michael Steiner ◽  
...  
Keyword(s):  
Measurement Data ◽  
Leading Edge ◽  
Aerodynamic Performance ◽  
Flow Structures ◽  
Flow Rates ◽  
Purge Flow ◽  
Mass Flows ◽  
The Individual ◽  
The Impact ◽  
First Time

This two-part paper deals with the influence of high-pressure turbine (HPT) purge flows on the aerodynamic performance of turbine center frames (TCF). Measurements were carried out in a product-representative one and a half-stage turbine test setup. Four individual purge mass flows differing in flow rate, pressure, and temperature were injected through the hub and tip, forward and aft cavities of the unshrouded HPT rotor. Two TCF designs, equipped with nonturning struts, were tested and compared. In this first part of the paper, the influence of different purge flow rates (PFR) is discussed, while in the second part of the paper, the impact of the individual hub and tip purge flows on the TCF aerodynamics is investigated. The acquired measurement data illustrate that the interaction of the ejected purge flow with the main flow enhances the secondary flow structures through the TCF duct. Depending on the PFR, the radial migration of purge air onto the strut surfaces directly impacts the loss behavior of the duct. The losses associated with the flow close to the struts and in the strut wakes are highly dependent on the relative position between the HPT vane and the strut leading edge (LE), as well as the interaction between vane wake and ejected purge flow. This first-time experimental assessment demonstrates that a reduction in the purge air requirement benefits the engine system performance by lowering the TCF total pressure loss.

Effects of an Upstream Cavity on the Secondary Flow in a Transonic Turbine Cascade

2012 ◽  
Vol 134 (5) ◽  
Author(s):  
H. M. Abo El Ella ◽  
S. A. Sjolander ◽  
T. J. Praisner
Keyword(s):  
Mach Number ◽  
Secondary Flow ◽  
Ultra Violet ◽  
Leading Edge ◽  
Surface Flow ◽  
Flow Structures ◽  
Pressure Probe ◽  
Turbine Cascade ◽  
Streamwise Vorticity ◽  
Blow Down

This paper examines experimentally the effects of an upstream cavity on the flow structures and secondary losses in a transonic linear turbine cascade. The cavity approximates the endwall geometry resulting from the platform overlap at the interface between stationary and rotating turbine blade rows. Previous investigations of the effects of upstream cavity geometries have been conducted mainly at low-speed conditions. The present work aims to extend such research into the transonic regime with a more engine representative upstream platform geometry. The investigations were carried out in a blow-down type wind tunnel. The cavity is located at 30 % of axial chord from the leading edge, extends 17 % of axial-chord in depth, and is followed by a smooth ramp to return the endwall to its nominal height. Two cascades are examined for the same blade geometry: the baseline cascade with a flat endwall and the cascade with the cavity endwall. Measurements were made at the design incidence and the outlet design Mach number of 0.80. At this condition, the Reynolds number based on outlet velocity is about 600,000. Off-design outlet Mach numbers of 0.69, and 0.89 were also investigated. Flowfield measurements were carried out at 40 % axial-chord downstream of the trailing edge, using a seven-hole pressure probe, to quantify losses and identify the flow structures. Additionally, surface flow visualization using an ultra-violet reactive dye was employed at the design Mach number, on the endwall and blade surfaces, to help in the interpretation of the flow physics. The experimental results also include blade-loading distributions, and the probe measurements were processed to obtain total-pressure loss coefficients, and streamwise vorticity distributions. It was found that the presence of the upstream cavity noticeably altered the structure and the strength of the secondary flow. Some effect on the secondary losses was also evident, with the cavity having a larger effect at the higher Mach number.

Effect of leading edge shapes on 81°/45° double-delta wing at low speeds

2017 ◽  
Vol 232 (16) ◽  
pp. 3100-3107 ◽  
Author(s):  
B Ashwin Kumar ◽  
P Kumar ◽  
S Das ◽  
JK Prasad
Keyword(s):  
Reasonable Agreement ◽  
Strong Influence ◽  
Delta Wing ◽  
Leading Edge ◽  
Aerodynamic Performance ◽  
Surface Flow ◽  
The Body ◽  
Freestream Velocity ◽  
Flow Visualizations ◽  
Double Delta Wing

Investigations were performed on an 81°/45° sweep double-delta wing at a freestream velocity of 20 m/s. Experiments consisted of the measurement of forces, static pressures, and surface flow visualizations. Effect of the leading edge shapes of the double-delta wing was studied. Results indicated a strong influence of the leading edge shape on the aerodynamic performance of the body. The increase in the bluntness of the leading edge augments the suction pressure and delays the vortex lift phenomena at higher angles of attack, which in turn enhances the lift over the wing. A reasonable agreement between the experiments and computations were observed.

Aerodynamic performance effects due to small leading-edge ice (roughness) on wings and tails

1993 ◽  
Vol 30 (6) ◽  
pp. 807-812 ◽  
Author(s):  
Walter O. Valarezo ◽  
Frank T. Lynch ◽  
Robert J. McGhee
Keyword(s):  
Leading Edge ◽  
Aerodynamic Performance ◽  
Ice Roughness ◽  
Performance Effects

Aerodynamics of Contra-Rotating Fans With Swept Blades

2015 ◽  
Author(s):  
K. Vijayraj ◽  
M. Govardhan
Keyword(s):  
Rotational Speed ◽  
Axial Flow ◽  
Pressure Rise ◽  
Aerodynamic Performance ◽  
The Other ◽  
Flow Structures ◽  
Current Investigation ◽  
Rotating System ◽  
Stall Margin ◽  
Static Head

A Counter-Rotating System (CRS) is composed of a front rotor and a rear rotor which rotates in the opposite direction. Compared with traditional rotor-stator system, the rear rotor is used not only to recover the static head but also to supply energy to the fluid. Therefore, to achieve the same performance, the use of a CRS may lead to a reduction of the rotational speed and may generate better homogeneous flow downstream of the stage. On the other hand, the mixing area in between the two rotors induces complicated interacting flow structures. Blade sweep has attracted the turbomachinery blade designers owing to a variety of performance benefits it offers. However, the effect of blade sweep on the performance, stall margin improvements whether it is advantageous/disadvantageous to sweep one or both rotors has not been studied till now. In the current investigation blade sweep on the performance characteristics of contra rotating axial flow fans are studied. Two sweep schemes (axial sweeping and tip chord line sweeping) are studied for two sweep angles (20° and 30°). Effect of blade sweep on front rotor and rear rotor are dealt separately by sweeping one at a time. Both rotors are swept together and effect of such sweep scheme on the aerodynamic performance of the stage is also reported here. The performance of contra rotating fan is significantly affected by all these parameters. Blade sweep improved the pressure rise and stall margin of front rotors. Axially swept rotors are found to have higher pressure rise with reduced incidence losses near the tip for front rotors. Sweeping the rear rotor is not effective since the pressure rise is less than that of unswept rotor and also has less stall margin.

scholarly journals Numerical simulation of flapping airfoil with alula

2020 ◽  
Vol 12 ◽  
pp. 175682932097798
Author(s):  
Han Bao ◽  
Wenqing Yang ◽  
Dongfu Ma ◽  
Wenping Song ◽  
Bifeng Song
Keyword(s):  
Aerodynamic Force ◽  
Angle Of Attack ◽  
Leading Edge ◽  
Aerodynamic Performance ◽  
Geometric Parameters ◽  
Flight Performance ◽  
Relative Angle ◽  
Vertical Distance ◽  
Unsteady Effect ◽  
Flapping Airfoil

Bionic micro aerial vehicles have become popular because of their high thrust efficiency and deceptive appearances. Leading edge or trailing edge devices (such as slots or flaps) are often used to improve the flight performance. Birds in nature also have leading-edge devices, known as the alula that can improve their flight performance at large angles of attack. In the present study, the aerodynamic performance of a flapping airfoil with alula is numerically simulated to illustrate the effects of different alula geometric parameters. Different alula relative angles of attack β (the angle between the chord line of the alula and that of the main airfoil) and vertical distances h between the alula and the main airfoil are simulated at pre-stall and post-stall conditions. Results show that at pre-stall condition, the lift increases with the relative angle of attack and the vertical distance, but the aerodynamic performance is degraded in the presence of alula compared with no alula, whereas at post-stall condition, the alula greatly enhances the lift. However, there seems to be an optimal relative angle of attack for the maximum lift enhancement at a fixed vertical distance considering the unsteady effect, which may indicate birds can adjust the alula twisting at different spanwise positions to achieve the best flight performance. Different alula geometric parameters may affect the aerodynamic force by modifying the pressure distribution along the airfoil. The results are instructive for design of flapping-wing bionic unmanned air vehicles.

Sign in / Sign up

Export Citation Format

Share Document