Online Guided Wave-Based Debonding Detection in Honeycomb Sandwich Structures

AIAA Journal ◽  
2012 ◽  
Vol 50 (2) ◽  
pp. 284-293 ◽  
Author(s):  
F. Song ◽  
G. L. Huang ◽  
G. K. Hu
Keyword(s):  
Sandwich Structures ◽  
Guided Wave ◽  
Honeycomb Sandwich ◽  
Debonding Detection

scholarly journals Core–skin debonding detection in honeycomb sandwich structures through guided wave wavefield analysis

2018 ◽  
Vol 30 (9) ◽  
pp. 1306-1317 ◽  
Author(s):  
Lingyu Yu ◽  
Zhenhua Tian ◽  
Xiaopeng Li ◽  
Rui Zhu ◽  
Guoliang Huang
Keyword(s):  
Guided Waves ◽  
Sandwich Structures ◽  
Lamb Waves ◽  
Laser Doppler Vibrometer ◽  
Low Frequency ◽  
Guided Wave ◽  
Honeycomb Sandwich ◽  
Debonding Detection ◽  
The Waves ◽  
Detection And Quantification

Ultrasonic guided waves have proven to be an effective and efficient method for damage detection and quantification in various plate-like structures. In honeycomb sandwich structures, wave propagation and interaction with typical defects such as hidden debonding damage are complicated; hence, the detection of defects using guided waves remains a challenging problem. The work presented in this article investigates the interaction of low-frequency guided waves with core–skin debonding damage in aluminum core honeycomb sandwich structures using finite element simulations. Due to debonding damage, the waves propagating in the debonded skin panel change to fundamental antisymmetric Lamb waves with different wavenumber values. Exploiting this mechanism, experimental inspection using a non-contact laser Doppler vibrometer was performed to acquire wavefield data from pristine and debonded structures. The data were then processed and analyzed with two wavefield data–based imaging approaches, the filter reconstruction imaging and the spatial wavenumber imaging. Both approaches can clearly indicate the presence, location, and size of the debonding in the structures, thus proving to be effective methods for debonding detection and quantification for honeycomb sandwich structures.

Study of Guided Wave Propagation in Honeycomb Sandwich Structures

2014 ◽  
Author(s):  
Zhenhua Tian ◽  
Guoliang Huang ◽  
Lingyu Yu
Keyword(s):  
Wave Propagation ◽  
Guided Waves ◽  
Sandwich Structures ◽  
Guided Wave ◽  
Experimental Results ◽  
Fe Model ◽  
Laser Vibrometry ◽  
Honeycomb Core ◽  
Guided Wave Propagation ◽  
Honeycomb Sandwich

This paper studies the guided waves in honeycomb sandwich structures and explores the ability of guided waves for the debonding damage detection. Both the finite element (FE) simulations and laser vibrometry experiments are used. A three-dimensional (3D) FE model is built to simulate the guided waves in a honeycomb sandwich plate. The simulation results show the guided waves in the structure depend on the wave frequency. At low frequencies, the global guided waves propagate in the entire sandwich, while leaky guided waves dominate in the skin panel at high frequencies. To further understand the guided wave propagation fundamentals, laser vibrometry experiments are performed. The waveforms, time-space wavefields, and frequency-wavenumber spectra obtained from the experiments are used to unveil the wave propagation features. The experimental results confirm the leaky guided waves. Moreover, the experimental results show the complex wave interactions induced by the honeycomb core. When the debonding between the skin and honeycomb core presents, the guided wave amplitude increases, and the wave interaction with the honeycomb core reduces.

Numerical and experimental investigation for enhancing the energy absorption capacity of the novel three-dimensional printed sandwich structures

2021 ◽  
pp. 146442072199749
Author(s):  
H Geramizadeh ◽  
S Dariushi ◽  
S Jedari Salami
Keyword(s):  
Energy Absorption ◽  
Sandwich Structures ◽  
Three Dimensional ◽  
Absorption Capacity ◽  
The Novel ◽  
Energy Absorption Capacity ◽  
Fused Deposition ◽  
Honeycomb Sandwich ◽  
Out Of Plane ◽  
Vertical Walls

The current study focuses on designing the optimal three-dimensional printed sandwich structures. The main goal is to improve the energy absorption capacity of the out-of-plane honeycomb sandwich beam. The novel Beta VI and Alpha VI were designed in order to achieve this aim. In the Beta VI, the connecting curves (splines) were used instead of the four diagonal walls, while the two vertical walls remained unchanged. The Alpha VI is a step forward on the Beta VI, which was promoted by filleting all angles among the vertical walls, created arcs, and face sheets. The two offered sandwich structures have not hitherto been provided in the literature. All models were designed and simulated by the CATIA and ABAQUS, respectively. The three-dimensional printer fabricated the samples by fused deposition modeling technique. The material properties were determined under tensile, compression, and three-point bending tests. The results are carried out by two methods based on experimental tests and finite element analyses that confirmed each other. The achievements provide novel insights into the determination of the adequate number of unit cells and demonstrate the energy absorption capacity of the Beta VI and Alpha VI are 23.7% and 53.9%, respectively, higher than the out-of-plane honeycomb sandwich structures.

Sign in / Sign up

Export Citation Format

Share Document