Wind-Tunnel Interference Effects on Delta Wing Aerodynamics Computational Fluid Dynamics Investigation

2005 ◽  
Vol 42 (1) ◽  
pp. 189-198 ◽  
Author(s):  
M. R. Allan ◽  
K. J. Badcock ◽  
G. N. Barakos ◽  
B. E. Richards
Keyword(s):  
Fluid Dynamics ◽  
Computational Fluid Dynamics ◽  
Wind Tunnel ◽  
Delta Wing ◽  
Interference Effects ◽  
Wing Aerodynamics

scholarly journals Wind-Induced Phenomena in Long-Span Cable-Supported Bridges: A Comparative Review of Wind Tunnel Tests and Computational Fluid Dynamics Modelling

2021 ◽  
Vol 11 (4) ◽  
pp. 1642
Author(s):  
Yuxiang Zhang ◽  
Philip Cardiff ◽  
Jennifer Keenahan
Keyword(s):  
Fluid Dynamics ◽  
Computational Fluid Dynamics ◽  
Wind Tunnel ◽  
Careful Analysis ◽  
Wind Effects ◽  
Wind Tunnel Tests ◽  
Long Span Bridges ◽  
Long Span ◽  
Comparative Review ◽  
Dynamics Modelling

Engineers, architects, planners and designers must carefully consider the effects of wind in their work. Due to their slender and flexible nature, long-span bridges can often experience vibrations due to the wind, and so the careful analysis of wind effects is paramount. Traditionally, wind tunnel tests have been the preferred method of conducting bridge wind analysis. In recent times, owing to improved computational power, computational fluid dynamics simulations are coming to the fore as viable means of analysing wind effects on bridges. The focus of this paper is on long-span cable-supported bridges. Wind issues in long-span cable-supported bridges can include flutter, vortex-induced vibrations and rain–wind-induced vibrations. This paper presents a state-of-the-art review of research on the use of wind tunnel tests and computational fluid dynamics modelling of these wind issues on long-span bridges.

Sailing Yacht Rig Improvements Through Viscous Computational Fluid Dynamics

2005 ◽  
Author(s):  
Vincent G. Chapin ◽  
Romaric Neyhousser ◽  
Stephane Jamme ◽  
Guillaume Dulliand ◽  
Patrick Chassaing
Keyword(s):  
Fluid Dynamics ◽  
Computational Fluid Dynamics ◽  
Wind Tunnel ◽  
High Speed ◽  
Stokes Equations ◽  
Wind Tunnel Test ◽  
Physical Modelling ◽  
Optimized Design ◽  
Linear Interaction ◽  
Sailing Yacht

In this paper we propose a rational viscous Computational Fluid Dynamics (CFD) methodology applied to sailing yacht rig aerodynamic design and analysis. After an outlook of present challenges in high speed sailing, we emphasized the necessity of innovation and CFD to conceive, validate and optimize new aero-hydrodynamic concepts. Then, we present our CFD methodology through CAD, mesh generation, numerical and physical modelling choices, and their validation on typical rig configurations through wind-tunnel test comparisons. The methodology defined, we illustrate the relevance and wide potential of advanced numerical tools to investigate sailing yacht rig design questions like the relation between sail camber, propulsive force and aerodynamic finesse, and like the mast-mainsail non linear interaction. Through these examples, it is shown how sailing yacht rig improvements may be drawn by using viscous CFD based on Reynolds Averaged Navier-Stokes equations (RANS). Then the extensive use of viscous CFD, rather than wind-tunnel tests on scale models, for the evaluation or ranking of improved designs with increased time savings. Viscous CFD methodology is used on a preliminary study of the complex and largely unknown Yves Parlier Hydraplaneur double rig. We show how it is possible to increase our understanding of his flow physics with strong sail interactions, and we hope this methodology will open new roads toward optimized design. Throughout the paper, the necessary comparison between CFD and wind-tunnel test will be presented to focus on limitations and drawbacks of viscous CFD tools, and to address future improvements.

Development of Boundary Layer in CRIACIV in Florence (Prato) and Comparison with CFD

2016 ◽  
Vol 820 ◽  
pp. 359-364
Author(s):  
Marek Magát ◽  
Ivana Olekšáková ◽  
Juraj Žilinský
Keyword(s):  
Fluid Dynamics ◽  
Boundary Layer ◽  
Computational Fluid Dynamics ◽  
Wind Tunnel ◽  
Atmospheric Boundary Layer ◽  
Comparison Of The Results

In this article are described the results from testing profile of atmospheric boundary layer in BLWT (Boundary layer wind tunnel) in Florence (Prato), Italy with emphasis on comparison of the results with simulations in CFD (Computational fluid dynamics) software OpenFoam. The values are compared with calculated values from EuroCode.

scholarly journals Performance prediction of loop-type wind turbine

2020 ◽  
Vol 12 (2) ◽  
pp. 168781401984047
Author(s):  
Wonyoung Jeon ◽  
Jeanho Park ◽  
Seungro Lee ◽  
Youngguan Jung ◽  
Yeesock Kim ◽  
...  
Keyword(s):  
Fluid Dynamics ◽  
Computational Fluid Dynamics ◽  
Wind Tunnel ◽  
Wind Turbine ◽  
Experimental Results ◽  
Scale Model ◽  
Dynamics Analysis ◽  
Blockage Ratio ◽  
Horizontal Axis Wind Turbine ◽  
Computational Fluid Dynamics Analysis

An experimental and analytical method to evaluate the performance of a loop-type wind turbine generator is presented. The loop-type wind turbine is a horizontal axis wind turbine with a different shaped blade. A computational fluid dynamics analysis and experimental studies were conducted in this study to validate the performance of the computational fluid dynamics method, when compared with the experimental results obtained for a 1/15 scale model of a 3 kW wind turbine. Furthermore, the performance of a full sized wind turbine is predicted. The computational fluid dynamics analysis revealed a sufficiently large magnitude of external flow field, indicating that no factor influences the flow other than the turbine. However, the experimental results indicated that the wall surface of the wind tunnel significantly affects the flow, due to the limited cross-sectional size of the wind tunnel used in the tunnel test. The turbine power is overestimated when the blockage ratio is high; thus, the results must be corrected by defining the appropriate blockage factor (the factor that corrects the blockage ratio). The turbine performance was corrected using the Bahaj method. The simulation results showed good agreement with the experimental results. The performance of an actual 3 kW wind turbine was also predicted by computational fluid dynamics.

scholarly journals Computational fluid dynamics simulation of the turbulence models in the tested section on wind tunnel

2020 ◽  
Vol 11 (4) ◽  
pp. 1201-1209
Author(s):  
Ismail ◽  
Johanis John ◽  
Erlanda A. Pane ◽  
Budhi M. Suyitno ◽  
Gama H.N.N. Rahayu ◽  
...  
Keyword(s):  
Fluid Dynamics ◽  
Computational Fluid Dynamics ◽  
Wind Tunnel ◽  
Turbulence Models ◽  
Dynamics Simulation ◽  
Computational Fluid Dynamics Simulation

Detailed Analysis of the Wake Structure of a Straight-Blade H-Darrieus Wind Turbine by Means of Wind Tunnel Experiments and Computational Fluid Dynamics Simulations

2017 ◽  
Vol 140 (3) ◽  
Author(s):  
Alessandro Bianchini ◽  
Francesco Balduzzi ◽  
Giovanni Ferrara ◽  
Lorenzo Ferrari ◽  
Giacomo Persico ◽  
...  
Keyword(s):  
Fluid Dynamics ◽  
Experimental Data ◽  
Computational Fluid Dynamics ◽  
Wind Tunnel ◽  
Wind Turbines ◽  
Large Scale ◽  
Vertical Axis ◽  
Performance Estimation ◽  
Small Scale ◽  
Dynamics Simulations

Darrieus vertical axis wind turbines (VAWTs) have been recently identified as the most promising solution for new types of applications, such as small-scale installations in complex terrains or offshore large floating platforms. To improve their efficiencies further and make them competitive with those of conventional horizontal axis wind turbines, a more in depth understanding of the physical phenomena that govern the aerodynamics past a rotating Darrieus turbine is needed. Within this context, computational fluid dynamics (CFD) can play a fundamental role, since it represents the only model able to provide a detailed and comprehensive representation of the flow. Due to the complexity of similar simulations, however, the possibility of having reliable and detailed experimental data to be used as validation test cases is pivotal to tune the numerical tools. In this study, a two-dimensional (2D) unsteady Reynolds-averaged Navier–Stokes (U-RANS) computational model was applied to analyze the wake characteristics on the midplane of a small-size H-shaped Darrieus VAWT. The turbine was tested in a large-scale, open-jet wind tunnel, including both performance and wake measurements. Thanks to the availability of such a unique set of experimental data, systematic comparisons between simulations and experiments were carried out for analyzing the structure of the wake and correlating the main macrostructures of the flow to the local aerodynamic features of the airfoils in cycloidal motion. In general, good agreement on the turbine performance estimation was constantly appreciated.

Wind Tunnel Testing and Computational Fluid Dynamics Analysis of a Wing-in-Ground Effect Vehicle

2007 ◽  
Author(s):  
Boonseng Soh ◽  
Andrew Low ◽  
Cees Bil ◽  
Brendon Bobbermien
Keyword(s):  
Fluid Dynamics ◽  
Computational Fluid Dynamics ◽  
Wind Tunnel ◽  
Ground Effect ◽  
Wind Tunnel Testing ◽  
Cfd Modelling ◽  
Aerodynamic Analysis ◽  
Computational Fluid Dynamics Analysis ◽  
Wing In Ground Effect ◽  
Tunnel Testing

The Wing-in-Ground Effect Concept Technology Demonstrator (WIGE CTD) project is a joint venture between Advanced Aerosystem Technologies Pty Ltd and RMIT University, aiming to design, validate and build a prototype recreational vehicle to fly two passengers over a distance of 500km at approximately 120km/h. The WIGE vehicle will fly very close to the surface, usually water, taking advantage of ground effect to transport passengers with a greater lift/drag ratio, and thus greater fuel-efficiency than conventional aircraft. Following preliminary design, an aerodynamic analysis of the vehicle was performed using wind tunnel testing and Computational Fluid Dynamics (CFD). This paper describes the methods used for wind tunnel testing and CFD modelling of the WIGE CTD design. Results obtained using the two approaches are compared with the aim of validating the CFD model and the techniques used in both wind tunnel and CFD modelling for use in future analyses. In addition to the aerodynamic analysis, a basic CFD prediction of the maximum hydrodynamic drag experienced during take off was attempted using a simple model of the WIGE vehicle hull. This result is required in order to ensure that the aquatic take off required by WIGE vehicles was possible for the design. Concurrently, the feasibility of using a general-purpose CFD solver like Fluent to analyse hull performance was also evaluated through this aspect of the investigation.

Sign in / Sign up

Export Citation Format

Share Document