Navier-Stokes Computations for a Spinning Projectile from Subsonic to Supersonic Speeds

2005 ◽  
Vol 42 (2) ◽  
pp. 223-231 ◽  
Author(s):  
S. I. Silton
Keyword(s):  
Navier Stokes ◽  
Spinning Projectile

Longitudinal Aerodynamics of a Canard Guided Spin Stabilized Projectile

2012 ◽  
Vol 443-444 ◽  
pp. 719-723
Author(s):  
Xiu Ling Ji ◽  
Hai Peng Wang ◽  
Shi Ming Zeng ◽  
Chen Yang Jia
Keyword(s):  
Normal Force ◽  
Navier Stokes ◽  
Test Case ◽  
Aerodynamic Coefficients ◽  
Number Range ◽  
Detailed Understanding ◽  
Pitch Moment ◽  
Spinning Projectile ◽  
Mach 3 ◽  
Viable Approach

Navier–Stokes simulation is performed on a canard guided spinning projectile for different attack angles and circumferential position angles of canard over the Mach number range of 1.8–2.2. The computational Magnus moment coefficients of test case are validated with available experimental data of a Secant-Ogive-Cylinder-Boattail (SOCBT) configuration at Mach 3, demonstrating that the method can provide an accurate and viable approach for this problem. The aim of the present study is to provide a detailed understanding of the effects of canard with different circumferential position angles on longitudinal aerodynamic coefficients at three supersonic speeds and various angles of attack. And the results show that normal force coefficients and pitch moment coefficients vary periodically with the circumferential position angles of canard.

Effects of stator splitter blades on aerodynamic performance of a single-stage transonic axial compressor

2020 ◽  
Vol 14 (4) ◽  
pp. 7369-7378
Author(s):  
Ky-Quang Pham ◽  
Xuan-Truong Le ◽  
Cong-Truong Dinh
Keyword(s):  
Stokes Equations ◽  
Three Dimensional ◽  
Axial Compressor ◽  
Aerodynamic Performance ◽  
Numerical Results ◽  
Single Stage ◽  
Navier Stokes ◽  
Navier Stokes Equations ◽  
Operating Stability ◽  
Length Coverage

Splitter blades located between stator blades in a single-stage axial compressor were proposed and investigated in this work to find their effects on aerodynamic performance and operating stability. Aerodynamic performance of the compressor was evaluated using three-dimensional Reynolds-averaged Navier-Stokes equations using the k-e turbulence model with a scalable wall function. The numerical results for the typical performance parameters without stator splitter blades were validated in comparison with experimental data. The numerical results of a parametric study using four geometric parameters (chord length, coverage angle, height and position) of the stator splitter blades showed that the operational stability of the single-stage axial compressor enhances remarkably using the stator splitter blades. The splitters were effective in suppressing flow separation in the stator domain of the compressor at near-stall condition which affects considerably the aerodynamic performance of the compressor.

Experimental and Numerical Analysis of a Motorcycle Air Intake System Aerodynamics and Performance

2020 ◽  
Vol 17 (1) ◽  
Author(s):  
M. A. Abd Halim ◽  
N. A. R. Nik Mohd ◽  
M. N. Mohd Nasir ◽  
M. N. Dahalan
Keyword(s):  
Combustion Process ◽  
Three Dimensional ◽  
Engine Performance ◽  
Internal Flow ◽  
Rapid Expansion ◽  
Navier Stokes ◽  
Turbulent Fluctuation ◽  
Ansys Fluent ◽  
Induction System ◽  
Acceleration And Deceleration

Induction system or also known as the breathing system is a sub-component of the internal combustion system that supplies clean air for the combustion process. A good design of the induction system would be able to supply the air with adequate pressure, temperature and density for the combustion process to optimizing the engine performance. The induction system has an internal flow problem with a geometry that has rapid expansion or diverging and converging sections that may lead to sudden acceleration and deceleration of flow, flow separation and cause excessive turbulent fluctuation in the system. The aerodynamic performance of these induction systems influences the pressure drop effect and thus the engine performance. Therefore, in this work, the aerodynamics of motorcycle induction systems is to be investigated for a range of Cubic Feet per Minute (CFM). A three-dimensional simulation of the flow inside a generic 4-stroke motorcycle airbox were done using Reynolds-Averaged Navier Stokes (RANS) Computational Fluid Dynamics (CFD) solver in ANSYS Fluent version 11. The simulation results are validated by an experimental study performed using a flow bench. The study shows that the difference of the validation is 1.54% in average at the total pressure outlet. A potential improvement to the system have been observed and can be done to suit motorsports applications.

Sign in / Sign up

Export Citation Format

Share Document