Hardware-in-the-Loop Testing of a Fuel Cell Aircraft Powerplant

2009 ◽  
Vol 25 (6) ◽  
pp. 1336-1344 ◽  
Author(s):  
Thomas H. Bradley ◽  
Blake A. Moffitt ◽  
Dmintri N. Mavris ◽  
Thomas F. Fuller ◽  
David E. Parekh
Keyword(s):  
Fuel Cell ◽  
Hardware In The Loop ◽  
Fuel Cell Aircraft

scholarly journals A Real-Time Degradation Model for Hardware in the Loop Simulation of Fuel Cell Gas Turbine Hybrid Systems

2015 ◽  
Author(s):  
Valentina Zaccaria ◽  
Alberto Traverso ◽  
David Tucker
Keyword(s):  
Fuel Cell ◽  
Real Time ◽  
Gas Turbine ◽  
Hybrid Systems ◽  
Current Density ◽  
Gas Turbines ◽  
Hardware In The Loop ◽  
Fuel Utilization ◽  
Time Operation ◽  
The Impact

The theoretical efficiencies of gas turbine fuel cell hybrid systems make them an ideal technology for the future. Hybrid systems focus on maximizing the utilization of existing energy technologies by combining them. However, one pervasive limitation that prevents the commercialization of such systems is the relatively short lifetime of fuel cells, which is due in part to several degradation mechanisms. In order to improve the lifetime of hybrid systems and to examine long-term stability, a study was conducted to analyze the effects of electrochemical degradation in a solid oxide fuel cell (SOFC) model. The SOFC model was developed for hardware-in-the-loop simulation with the constraint of real-time operation for coupling with turbomachinery and other system components. To minimize the computational burden, algebraic functions were fit to empirical relationships between degradation and key process variables: current density, fuel utilization, and temperature. Previous simulations showed that the coupling of gas turbines and SOFCs could reduce the impact of degradation as a result of lower fuel utilization and more flexible current demands. To improve the analytical capability of the model, degradation was incorporated on a distributed basis to identify localized effects and more accurately assess potential failure mechanisms. For syngas fueled systems, the results showed that current density shifted to underutilized sections of the fuel cell as degradation progressed. Over-all, the time to failure was increased, but the temperature difference along cell was increased to unacceptable levels, which could not be determined from the previous approach.

scholarly journals Hardware-in-the-Loop Operations With an Emulator Rig for SOFC Hybrid Systems

2017 ◽  
Author(s):  
Mario L. Ferrari ◽  
Alessandro Sorce ◽  
Aristide F. Massardo
Keyword(s):  
Fuel Cell ◽  
Real Time ◽  
Hybrid Systems ◽  
Control Strategies ◽  
Experimental Tests ◽  
Outlet Temperature ◽  
Hardware In The Loop ◽  
Set Point ◽  
The Real ◽  
System Components

This paper shows the Hardware-In-the-Loop (HIL) technique developed for the complete emulation of Solid Oxide Fuel Cell (SOFC) based hybrid systems. This approach is based on the coupling of an emulator test rig with a real-time software for components which are not included in the plant. The experimental facility is composed of a T100 microturbine (100 kW electrical power size) modified for the connection to an SOFC emulator device. This component is composed of both anodic and cathodic vessels including also the anodic recirculation system which is carried out with a single stage ejector, driven by an air flow in the primary duct. However, no real stack material was installed in the plant. For this reason, a real-time dynamic software was developed in the Matlab-Simulink environment including all the SOFC system components (the fuel cell stack with the calculation of the electrochemical aspects considering also the real losses, the reformer, and a cathodic recirculation based on a blower, etc.). This tool was coupled with the real system utilizing a User Datagram Protocol (UDP) data exchange approach (the model receives flow data from the plant at the inlet duct of the cathodic vessel, while it is able to operate on the turbine changing its set-point of electrical load or turbine outlet temperature). So, the software is operated to control plant properties to generate the effect of a real SOFC in the rig. In stand-alone mode the turbine load is changed with the objective of matching the measured Turbine Outlet Temperature (TOT) value with the calculated one by the model. In grid-connected mode the software/hardware matching is obtained through a direct manipulation of the TOT set-point. This approach was essential to analyze the matching issues between the SOFC and the micro gas turbine devoting several tests on critical operations, such as start-up, shutdown and load changes. Special attention was focused on tests carried out to solve the control system issues for the entire real hybrid plant emulated with this HIL approach. Hence, the innovative control strategies were developed and successfully tested considering both the Proportional Integral Derivative and advanced approaches. Thanks to the experimental tests carried out with this HIL system, a comparison between different control strategies was performed including a statistic analysis on the results The positive performance obtainable with a Model Predictive Control based technique was shown and discussed. So, the HIL system presented in this paper was essential to perform the experimental tests successfully (for real hybrid system development) without the risks of destroying the stack in case of failures. Mainly surge (especially during transient operations, such as load changes) and other critical conditions (e.g. carbon deposition, high pressure difference between the fuel cell sides, high thermal gradients in the stack, excessive thermal stress in the SOFC system components, etc.) have to be carefully avoided in complete plants.

Dynamic fuel cell models and their application in hardware in the loop simulation

2006 ◽  
Vol 154 (2) ◽  
pp. 386-393 ◽  
Author(s):  
Zijad Lemeš ◽  
Andreas Vath ◽  
Th. Hartkopf ◽  
H. Mäncher
Keyword(s):  
Fuel Cell ◽  
Hardware In The Loop ◽  
Cell Models
Sign in / Sign up

Export Citation Format

Share Document