Plasma Actuators for Cylinder Flow Control and Noise Reduction

AIAA Journal ◽  
2008 ◽  
Vol 46 (8) ◽  
pp. 1921-1931 ◽  
Author(s):  
Flint O. Thomas ◽  
Alexey Kozlov ◽  
Thomas C. Corke
Keyword(s):  
Flow Control ◽  
Noise Reduction ◽  
Plasma Actuators ◽  
Cylinder Flow

Comparative Evaluation of Dielectric Materials for Plasma Actuators Active Flow Control and Heat Transfer Applications

2021 ◽  
Author(s):  
F. F. Rodrigues ◽  
J. Nunes-Pereira ◽  
M. Abdollahzadeh ◽  
J. Pascoa ◽  
S. Lanceros-Mendez
Keyword(s):  
Heat Transfer ◽  
Flow Control ◽  
Dielectric Layer ◽  
Active Flow Control ◽  
Thermal Power ◽  
Dielectric Materials ◽  
Plasma Actuators ◽  
Dbd Plasma ◽  
Control Applications ◽  
Active Flow

Abstract Dielectric Barrier Discharge (DBD) plasma actuators are simple devices with great potential for active flow control applications. Further, it has been recently proven their ability for applications in the area of heat transfer, such as film cooling of turbine blades or ice removal. The dielectric material used in the fabrication of these devices is essential in determining the device performance. However, the variety of dielectric materials studied in the literature is very limited and the majority of the authors only use Kapton, Teflon, Macor ceramic or poly(methyl methacrylate) (PMMA). Furthermore, several authors reported difficulties in the durability of the dielectric layer when the actuators operate at high voltage and frequency. Also, it has been reported that, after long operation time, the dielectric layer suffers degradation due to its exposure to plasma discharge, degradation that may lead to the failure of the device. Considering the need of durable and robust actuators, as well as the need of higher flow control efficiencies, it is highly important to develop new dielectric materials which may be used for plasma actuator fabrication. In this context, the present study reports on the experimental testing of dielectric materials which can be used for DBD plasma actuators fabrication. Plasma actuators fabricated of poly(vinylidene fluoride) (PVDF) and polystyrene (PS) have been fabricated and evaluated. Although these dielectric materials are not commonly used as dielectric layer of plasma actuators, their interesting electrical and dielectric properties and the possibility of being used as sensors, indicate their suitability as potential alternatives to the standard used materials. The plasma actuators produced with these nonstandard dielectric materials were analyzed in terms of electrical characteristics, generated flow velocity and mechanical efficiency, and the obtained results were compared with a standard actuator made of Kapton. An innovative calorimetric method was implemented in order to estimate the thermal power transferred by these devices to an adjacent flow. These results allowed to discuss the ability of these new dielectric materials not only for flow control applications but also for heat transfer applications.

Dual-position excitation technique in flow control over an airfoil at low speeds

2018 ◽  
Vol 30 (9) ◽  
pp. 4141-4154
Author(s):  
Abbas Ebrahimi ◽  
Majid Hajipour ◽  
Kamran Ghamkhar
Keyword(s):  
Flow Control ◽  
Shear Layer ◽  
Control Method ◽  
Lift Coefficient ◽  
Shear Layers ◽  
Control Flow ◽  
Plasma Actuators ◽  
Dbd Plasma ◽  
Surface Shear ◽  
Content Type

PurposeThe purpose of this paper is to control flow separation over a NACA 4415 airfoil by applying unsteady forces to the separated shear layers using dielectric barrier discharge (DBD) plasma actuators. This novel flow control method is studied under conditions which the airfoil angle of attack is 18°, and Reynolds number based on chord length is 5.5 × 105.Design/methodology/approachLarge eddy simulation of the turbulent flow is used to capture vortical structures through the airfoil wake. Power spectral density analysis of the baseline flow indicates dominant natural frequencies associated with “shear layer mode” and “wake mode.” The wake mode frequency is used simultaneously to excite separated shear layers at both the upper surface and the trailing edge of the airfoil (dual-position excitation), and it is also used singly to excite the upper surface shear layer (single-position excitation).FindingsBased on the results, actuations manipulate the shear layers instabilities and change the wake patterns considerably. It is revealed that in the single-position excitation case, the vortices shed from the upper surface shear layer are more coherent than the dual-position excitation case. The maximum value of lift coefficient and lift-to-drag ratio is achieved, respectively, by single-position excitation as well as dual-position excitation.Originality/valueThe paper contributes to the understanding and progress of DBD plasma actuators for flow control applications. Further, this research could be a beneficial solution for the promising design of advanced low speed flying vehicles.

Aerodynamic Drag Reduction Investigation for a Simplified Road Vehicle Using Plasma Flow Control

2016 ◽  
Author(s):  
Bahram Khalighi ◽  
Joanna Ho ◽  
John Cooney ◽  
Brian Neiswander ◽  
Thomas C. Corke ◽  
...  
Keyword(s):  
Drag Reduction ◽  
Flow Control ◽  
Plasma Flow ◽  
Aerodynamic Drag ◽  
Force Balance ◽  
Plasma Actuators ◽  
Ground Vehicles ◽  
Mean Velocity ◽  
Local Flow ◽  
Plasma Flow Control

The effect of plasma flow control on reducing aerodynamic drag for ground vehicles is investigated. The experiments were carried out for a simplified ground vehicle using single dielectric barrier discharge (SDBD) plasma actuators. The plasma actuators were designed to alter the flow structure in the wake region behind the vehicle. The Ahmed body was modified to allow eight different vehicle geometries (with backlight or slant angles of 0° and 35°). Each of these were further modified by rounding the edges with different radii. Flow visualizations such as particle streams and surface oil were used to quantify features of the local flow field. The drag on the models was measured using a force balance as well as by integrating the mean velocity profiles in the model wakes. The results indicated that flow modifications needed to be applied symmetrically (upper to lower and/or side to side). This was demonstrated with the 0° backlight angle (square-back) that had all four side-corners rounded. Plasma actuators were applied to all four of the rounded edges to enhance the ability to direct the flow into the wake. Wake measurements showed that steady actuation at a fixed actuator voltage reduced the drag by an average of 20% at the lower velocities (below 15 m/s) and by 3% at the highest velocity tested (20 m/s). Model constraints prevented increasing the plasma actuator voltage that was needed to maintain the higher drag reduction observed at the lower speeds.

Dielectric Barrier Discharge (DBD) Plasma Actuators for Flow Control in Turbine Engines: Simulation of Flight Conditions in the Laboratory by Density Matching

2019 ◽  
Vol 36 (2) ◽  
pp. 157-173
Author(s):  
David E. Ashpis ◽  
Douglas R. Thurman
Keyword(s):  
Flow Control ◽  
Dielectric Barrier Discharge ◽  
Barrier Discharge ◽  
Test Chamber ◽  
Plasma Actuators ◽  
Chamber Pressure ◽  
Turbine Engines ◽  
Dbd Plasma ◽  
Dielectric Barrier ◽  
Actuator Performance

Abstract We address requirements for laboratory testing of AC Dielectric Barrier Discharge (AC-DBD) plasma actuators for active flow control in aviation gas turbine engines. The actuator performance depends on the gas discharge properties, which, in turn, depend on the pressure and temperature. It is technically challenging to simultaneously set test-chamber pressure and temperature to the flight conditions. We propose that the AC-DBD actuator performance depends mainly on the gas density, when considering ambient conditions effects. This enables greatly simplified testing at room temperature with only chamber pressure needing to be set to match the density at flight conditions. For turbine engines, we first constructed generic models of four engine thrust-classes; 300-, 150-, 50-passenger, and military fighter, and then calculated the densities along the engine at sea-level takeoff and altitude cruise conditions. The range of chamber pressures that covers all potential applications was found to be from 3 to 1256 kPa (0.03 to 12.4 atm), depending on engine-class, flight altitude, and actuator placement in the engine. The engine models are non-proprietary and can be used as reference data for evaluation requirements of other actuator types and for other purposes. We also provided examples for air vehicles applications up to 19,812 m (65,000 ft).

Improved performance of polyimide Cirlex‐based dielectric barrier discharge plasma actuators for flow control

2021 ◽  
Author(s):  
João Nunes‐Pereira ◽  
Frederico Freire Rodrigues ◽  
Mohammadmahdi Abdollahzadehsangroudi ◽  
José Carlos Páscoa ◽  
Senentxu Lanceros‐Mendez
Keyword(s):  
Flow Control ◽  
Dielectric Barrier Discharge ◽  
Discharge Plasma ◽  
Barrier Discharge ◽  
Plasma Actuators ◽  
Dielectric Barrier Discharge Plasma ◽  
Dielectric Barrier ◽  
Barrier Discharge Plasma ◽  
Improved Performance
Sign in / Sign up

Export Citation Format

Share Document