scholarly journals Seismic Response Modification Factor for Special Concrete Structures Based on Pushover &Non-linear Time History Analyses

2020 ◽  
Vol 5 (1) ◽  
pp. 436-445
Author(s):  
Rasha Attia Ahmed Attiaa ◽  
Reham Mohamed Galal Ebrahim El-Tahawy ◽  
Mohamed Nour El-Din Fayed
Keyword(s):  
Seismic Response ◽  
Linear Time ◽  
Concrete Structures ◽  
Time History ◽  
Response Modification Factor ◽  
Non Linear ◽  
Modification Factor

Effects of Pier Stiffness on the Seismic Response of Continuous Bridges with Irregular Configuration

2014 ◽  
Vol 638-640 ◽  
pp. 1794-1802 ◽  
Author(s):  
Si Si Wei
Keyword(s):  
Seismic Response ◽  
Linear Time ◽  
Time History ◽  
Time History Analysis ◽  
The Other ◽  
Relative Stiffness ◽  
History Analysis ◽  
Non Linear ◽  
Internal Forces

The seismic response of 4-span continuous bridges with different configurations has been investigated. In the series of bridges studied, the height of the central pier varies from 5 m to 100 m, while the heights of all the other piers remain the same. Using non-linear time history analysis, the internal forces at the bottom of individual piers have been predicted for each case. The correlation between the relative stiffness of adjacent piers and the ratio between the seismic response at the bottom of adjacent piers has been studied. Based on the results, in order to guarantee approximately balanced seismic response among all piers of a given bridge, a range of the relative column stiffness of two adjacent piers has been proposed.

scholarly journals Record-to-record variability and code-compatible seismic safety-checking with limited number of records

2021 ◽  
Author(s):  
Fatemeh Jalayer ◽  
Hossein Ebrahimian ◽  
Andrea Miano
Keyword(s):  
Seismic Hazard ◽  
Linear Time ◽  
Time History ◽  
Time History Analysis ◽  
Seismic Safety ◽  
Hazard Curve ◽  
History Analysis ◽  
Non Linear ◽  
Seismic Hazard Curve ◽  
Cloud Analysis

AbstractThe Italian code requires spectrum compatibility with mean spectrum for a suite of accelerograms selected for time-history analysis. Although these requirements define minimum acceptability criteria, it is likely that code-based non-linear dynamic analysis is going to be done based on limited number of records. Performance-based safety-checking provides formal basis for addressing the record-to-record variability and the epistemic uncertainties due to limited number of records and in the estimation of the seismic hazard curve. “Cloud Analysis” is a non-linear time-history analysis procedure that employs the structural response to un-scaled ground motion records and can be directly implemented in performance-based safety-checking. This paper interprets the code-based provisions in a performance-based key and applies further restrictions to spectrum-compatible record selection aiming to implement Cloud Analysis. It is shown that, by multiplying a closed-form coefficient, code-based safety ratio could be transformed into simplified performance-based safety ratio. It is shown that, as a proof of concept, if the partial safety factors in the code are set to unity, this coefficient is going to be on average slightly larger than unity. The paper provides the basis for propagating the epistemic uncertainties due to limited sample size and in the seismic hazard curve to the performance-based safety ratio both in a rigorous and simplified manner. If epistemic uncertainties are considered, the average code-based safety checking could end up being unconservative with respect to performance-based procedures when the number of records is small. However, it is shown that performance-based safety checking is possible with no extra structural analyses.

scholarly journals Nonlinear seismic response of reinforced concrete pedestals in elevated water tanks

2021 ◽  
Author(s):  
Razmyar Ghateh
Keyword(s):  
Shear Strength ◽  
Seismic Response ◽  
Design Guidelines ◽  
Current Guideline ◽  
Response Modification Factor ◽  
Nonlinear Seismic Response ◽  
Current Design ◽  
Modification Factor ◽  
Elevated Water ◽  
Water Tanks

Elevated water tanks are employed in water distribution facilities in order to provide storage and necessary pressure in water network systems. These structures have demonstrated poor seismic performance in the past earthquakes. In this study, a finite element method is employed for investigating the nonlinear seismic response of reinforced concrete (RC) pedestal in elevated water tanks. A combination of the most commonly constructed tank sizes and pedestal heights in industry are developed and investigated. Pushover analysis is performed in order to construct the pushover curves, establish the overstrength and ductility factor, and evaluate the effect of various parameters such as fundamental period and tank size on the seismic response factors of elevated water tanks. Furthermore, a probabilistic method is implemented to verify the seismic performance and response modification factor of elevated water tanks. The effect of wall openings in the seismic response characteristics of elevated water tanks is investigated as well. Finally, the effect of axial compression on shear strength of RC pedestals is evaluated and compared to nominal shear strength from current guideline and standards. The results of the study show that the tank size, pedestal height, fundamental period, and pedestal height to diameter ratio, could significantly affect the overstrength and ductility factor of RC pedestals. The nonlinear dynamic analysis results reveal that under the maximum considered earthquake (MCE) intensity, light and medium size tank models do not experience significant damages. However, heavy tank size models experience more damage in comparison with light and medium tank sizes. This study shows that the current code response modification factor values are appropriate for light and medium tank sizes; however they need to be modified for heavy tank sizes. The results of this study also reveal that if the pedestal wall openings are designed based on current design guidelines, then nearly identical nonlinear seismic response behaviour is expected from the pedestals with and without openings. Finally, it is shown that the pedestal maximum shear strength calculated by finite element method for the full tank state is higher than the nominal shear strength determined based on the current design guidelines compared to the nominal shear strength from current guideline and standards.

Sign in / Sign up

Export Citation Format

Share Document