scholarly journals Novel Design of Multiband Microstrip Patch Antenna for Wireless Communication

2019 ◽  
Vol 4 (3) ◽  
pp. 63-68
Author(s):  
Youssef Rhazi ◽  
Outman El Bakkali ◽  
Youssef El merabet ◽  
Mustpaha Ait lafkih ◽  
Seddik Bri ◽  
...  
Keyword(s):  
Wireless Communication ◽  
Patch Antenna ◽  
Microstrip Patch Antenna ◽  
Microstrip Patch ◽  
Novel Design

scholarly journals Omnidirectional Microstrip Patch Antenna for 2.4 GHz Wireless Communications

2021 ◽  
Vol 2114 (1) ◽  
pp. 012051
Author(s):  
Alaa M. Abdulhussein ◽  
Ali H. Khidhi ◽  
Ahmed A. Naser
Keyword(s):  
Computer Simulation ◽  
Wireless Communications ◽  
Wireless Communication ◽  
Patch Antenna ◽  
Communication Systems ◽  
Return Loss ◽  
Microstrip Patch Antenna ◽  
Wireless Communication Systems ◽  
Microstrip Patch ◽  
Operating Bandwidth

Abstract Antenna studies on various wireless communication systems have been carried out by many academics. In this research, the omnidirectional microstrip patch antenna (MPA) is proposed, manufactured, and tested. The operating bandwidth of the antenna is quite suitable for the different applications. The proposed antenna fabricated on the flame retardant (FR-4) substrate with a volume of 75.85 × 57.23 × 1.59 mm3. Computer simulation technology (CST) studio used to design and simulate. Experimental results show that the return loss (RL), bandwidth (BW), voltage standing wave ratio (VSWR) and input impedance (Zin ) are -25.26 dB, 61 MHz, 1.12 and 54.46 Ω, respectively. The antenna operates at 2.42 GHz (from 2.39 to 2.45 GHz), which has good performance in the Wi-Fi, Bluetooth, and ZigBee communications.

scholarly journals Microstrip patch antenna with metamaterial using superstrate technique for wireless communication

2021 ◽  
Vol 10 (4) ◽  
pp. 2055-2061
Author(s):  
Rasha Mahdi Salih ◽  
Ali Khalid Jassim
Keyword(s):  
Wireless Communications ◽  
Reflection Coefficient ◽  
Wireless Communication ◽  
Patch Antenna ◽  
Relative Permittivity ◽  
Microstrip Antenna ◽  
Microstrip Patch Antenna ◽  
Antenna Gain ◽  
Microstrip Patch ◽  
Antenna Performance

This work builds a metamaterial (MTM) superstrate loaded on a patch of microstrip antenna for wireless communications. The MTM superstrate is made up of four G-shaped resonators on FR-4 substrate with a relative permittivity of 4.4 and has a total area of (8×16) mm2, and is higher than the patch. The MTM superstrate increases antenna gain while also raising the input reflection coefficient. When it is 9 mm above the patch, the gain increased from 3.28 dB to 6.02 dB, and when it is 7 mm above the patch, the input reflection coefficient was enhanced from -31.217 dB to -45.8 dB. When the MTM superstrate loaded antenna was compared to the traditional unloaded antenna, it was discovered that metamaterials have a lot of potential for improving antenna performance.

Sign in / Sign up

Export Citation Format

Share Document