scholarly journals Experimental and numerical validation of an enhanced cylindrical contact force model

2011 ◽  
Author(s):  
C. Pereira ◽  
A. Ramalho ◽  
J. Ambrósio
Keyword(s):  
Contact Force ◽  
Force Model ◽  
Numerical Validation ◽  
Contact Force Model

scholarly journals Dynamics of Multibody Systems With Spherical Clearance Joints

2005 ◽  
Author(s):  
P. Flores ◽  
J. Ambro´sio ◽  
J. C. P. Claro ◽  
H. M. Lankarani
Keyword(s):  
Contact Force ◽  
Multibody Systems ◽  
Contact Forces ◽  
Force Model ◽  
Clearance Joints ◽  
Continuous Contact ◽  
Clearance Joint ◽  
Contact Force Model ◽  
Dynamics Of Multibody Systems ◽  
The Impact

This work deals with a methodology to assess the influence of the spherical clearance joints in spatial multibody systems. The methodology is based on the Cartesian coordinates, being the dynamics of the joint elements modeled as impacting bodies and controlled by contact forces. The impacts and contacts are described by a continuous contact force model that accounts for geometric and mechanical characteristics of the contacting surfaces. The contact force is evaluated as function of the elastic pseudo-penetration between the impacting bodies, coupled with a nonlinear viscous-elastic factor representing the energy dissipation during the impact process. A spatial four bar mechanism is used as an illustrative example and some numerical results are presented, being the efficiency of the developed methodology discussed in the process of their presentation. The results obtained show that the inclusion of clearance joints in the modelization of spatial multibody systems significantly influences the prediction of components’ position and drastically increases the peaks in acceleration and reaction moments at the joints. Moreover, the system’s response clearly tends to be nonperiodic when a clearance joint is included in the simulation.

Hertz Contact Force Model With Permanent Indentation in Impact Analysis of Solids

1992 ◽  
Author(s):  
Hamid M. Lankarani ◽  
Parviz E. Nikravesh
Keyword(s):  
Contact Force ◽  
Impact Analysis ◽  
Equations Of Motion ◽  
Solid Particles ◽  
Hertzian Contact ◽  
Contact Period ◽  
Force Model ◽  
Unknown Parameters ◽  
Contact Force Model ◽  
Energy And Momentum

Abstract A continuous analysis method for the direct-central impact of two solid particles is presented. Based on the assumption that local plasticity effects are the sole factor accounting for the dissipation of energy in impact, a Hertzian contact force model with permanent indentation is constructed. Utilizing energy and momentum considerations, the unknown parameters in the model are analytically evaluated in terms of a given coefficient of restitution and velocities before impact. The equations of motion of the two solids may then be integrated forward in time knowing the variation of the contact force during the contact period. For Illustration, an impact of two soft metallic particles is studied.

Experimental Validation of a Volumetric Planetary Rover Wheel/Soil Interaction Model

2013 ◽  
Author(s):  
Willem Petersen ◽  
John McPhee
Keyword(s):  
Contact Force ◽  
Interaction Model ◽  
Contact Model ◽  
Soil Parameters ◽  
Model Parameters ◽  
Force Model ◽  
Normal Contact ◽  
Planetary Rover ◽  
Normal Contact Force ◽  
Contact Force Model

For the multibody simulation of planetary rover operations, a wheel-soil contact model is necessary to represent the forces and moments between the tire and the soft soil. A novel nonlinear contact modelling approach based on the properties of the hypervolume of interpenetration is validated in this paper. This normal contact force model is based on the Winkler foundation model with nonlinear spring properties. To fully define the proposed normal contact force model for this application, seven parameters are required. Besides the geometry parameters that can be easily measured, three soil parameters representing the hyperelastic and plastic properties of the soil have to be identified. Since it is very difficult to directly measure the latter set of soil parameters, they are identified by comparing computer simulations with experimental results of drawbar pull tests performed under different slip conditions on the Juno rover of the Canadian Space Agency (CSA). A multibody dynamics model of the Juno rover including the new wheel/soil interaction model was developed and simulated in MapleSim. To identify the wheel/soil contact model parameters, the cost function of the model residuals of the kinematic data is minimized. The volumetric contact model is then tested by using the identified contact model parameters in a forward dynamics simulation of the rover on an irregular 3-dimensional terrain and compared against experiments.

A continuous contact force model for impact analysis

2022 ◽  
Vol 168 ◽  
pp. 108739
Author(s):  
Jie Zhang ◽  
Xu Liang ◽  
Zhonghai Zhang ◽  
Guanhua Feng ◽  
Quanliang Zhao ◽  
...  
Keyword(s):  
Contact Force ◽  
Impact Analysis ◽  
Force Model ◽  
Continuous Contact ◽  
Contact Force Model

A DOE- and Kriging-Based Model for Studying on the Dynamics of Multibody Mechanical Systems With Revolute Joint Clearance

2013 ◽  
Author(s):  
Zhenhua Zhang ◽  
Liang Xu ◽  
Paulo Flores ◽  
Hamid M. Lankarani
Keyword(s):  
Simulation Model ◽  
Mechanical System ◽  
Contact Force ◽  
Design Parameter ◽  
Joint Clearance ◽  
Design Parameters ◽  
Force Model ◽  
Revolute Joint ◽  
Clearance Joint ◽  
Contact Force Model

Over the last two decades, extensive work has been conducted on dynamic effect of joint clearances in multibody mechanical systems. In contrast, little work has been devoted to optimizing the performance of these systems. In this study, analysis of revolute joint clearance is formulated in term of a Hertzian-based contact force model. For illustration, the classical slider-crank mechanism with a revolute clearance joint at the piston pin is presented, and a simulation model is developed using the analysis/design code MSC.ADAMS. The clearance is modeled as a pin-in-a-hole surface-to-surface dry contact, with appropriate contact force model between the joint and bearing surfaces. Different simulations are performed to demonstrate the influence of the joint clearance size and the input crank speed on the dynamic behavior of the system with the clearance joint. An innovative design-of-experiment (DOE)-based method for optimizing the performance of a mechanical system with the revolute joint clearance for different ranges of design parameters is then proposed. Based on the simulation model results from sample points, which are selected by a Latin hypercube sampling (LHS) method, a polynomial function Kriging meta-model is established instead of the actual simulation model. The reason for development and use of the meta-model is to bypass computationally intensive simulations of a computer model for different design parameter values in place of a more efficient and cost-effective mathematical model. Finally, numerical results obtained from two application examples, considering the different design parameters, including the joint clearance size, crank speed, and contact stiffness, are presented for further analyzing the dynamics of the revolute clearance joint in a mechanical system. This allows for predicting the influence of design parameter changes, in order to minimize contact forces, accelerations, and power requirements due to the existence of joint clearance.

Dynamic Analysis and Wear Prediction of Planar Five-Bar Mechanism Considering Multiflexible Links and Multiclearance Joints

2017 ◽  
Vol 139 (5) ◽  
Author(s):  
Gengxiang Wang ◽  
Hongzhao Liu
Keyword(s):  
Contact Force ◽  
Dynamic Performance ◽  
Contact Forces ◽  
Force Model ◽  
Displacement Curve ◽  
Wear Depth ◽  
Wear Model ◽  
Clearance Joint ◽  
Contact Force Model ◽  
Cylindrical Joint

Effects of wear and member flexibility on the dynamic performance of a planar five-bar mechanism with joint-clearance are investigated. The equation of motion of the mechanism is derived based on the absolute nodal coordinate formulation (ANCF). In order to enhance the accuracy of the contact force, the slope of the load–displacement curve of the cylindrical joint with clearance is used. The contact deformation couples the joint wear to the contact state. The contact force model of Flores and coworkers is improved, by the introduction of the stiffness coefficient. The wear depth is predicted by using the Archard's wear model. Simulations show that the multiclearance joints can generate stronger contact forces relative to single clearance joint case. This leads to more severe wear in the joint. However, the mechanism with multiple flexible links can absorb more of the energy arising from the clearance joint, and this improves the wear phenomenon.

Online Parameter Estimation of the Lankarani–Nikravesh Contact Force Model Using Two Different Methods

2016 ◽  
Vol 13 (04) ◽  
pp. 1641017 ◽  
Author(s):  
Jia Ma ◽  
Linfang Qian ◽  
Guangsong Chen
Keyword(s):  
Parameter Estimation ◽  
Contact Force ◽  
Unscented Kalman Filter ◽  
Initial Conditions ◽  
Linear Method ◽  
Estimation Method ◽  
Recursive Least Squares ◽  
Force Model ◽  
Contact Force Model ◽  
Current Contact

Current contact force models are expected to be used under different environments, where the dynamical parameter estimation becomes an important issue in accurately analyzing the overall behavior of mechanical system especially for complex contact situations. In recent years, a significant amount of research has been carried out in relation to the nonlinear inverse problems, which can be generally divided into two categories: one is the linear method and the other can be called the nonlinear one. In this paper, both methods are described and compared. The linear method is based on the Taylor series and Exponentially Weighted Recursive Least Squares (EWRLS) estimation method. Whereas, the core of the nonlinear one is the Unscented Kalman Filter (UKF). The Lankarani–Nikravesh (L–N) contact force model is employed to quantify the contact effect in this paper, since it is proven to be more consistent with the physics of contact. Some simulation examples are employed to evaluate the convergence sensitivity of these two methods to parameter initial conditions. And the comparisons under the same simulation condition between both methods indicate that the nonlinear one is more robust and can converge faster than the linear one.

Sign in / Sign up

Export Citation Format

Share Document