scholarly journals DEVELOPMENT OF NOVEL ENVIRONMENTALLY SAFE AND HIGHLY EFFICIENT FIRE-EXTINGUISHING POWDERS BASED ON LOCAL MINERAL RAW MATERIALS

2017 ◽  
Author(s):  
LALI GURCHUMELIA ◽  
MURMAN TSARAKHOV ◽  
SALOME TKEMALADZE ◽  
GEORGE BEZARASHVILI ◽  
LASHA TKEMALADZE
Keyword(s):  
Raw Materials ◽  
Mineral Raw Materials ◽  
Highly Efficient ◽  
Fire Extinguishing ◽  
Environmentally Safe

scholarly journals INNOVATIVE PROCESSES OF DEEP AND ENVIRONMENTALLY SAFE PROCESSING OF TECHNOGENIC RAW MATERIALS IN THE CONDITIONS OF NEW ECONOMIC CHALLENGES

2021 ◽  
Vol 13 (2) ◽  
pp. 224-237
Author(s):  
Valentin CHANTURIA ◽  
◽  
Irina SHADRUNOVA ◽  
Olga GORLOVA ◽  
◽  
...  
Keyword(s):  
Raw Materials ◽  
Mining Industry ◽  
Mineral Resources ◽  
Secondary Products ◽  
Resource Saving ◽  
Mineral Raw Materials ◽  
The Face ◽  
Environmentally Safe ◽  
Copper Zinc ◽  
Technogenic Raw Materials

Innovative processes of deep and complex processing of technogenic raw materials in the context of sustainable development of the mining industry and the economic challenges facing the mining industry should ensure the transition to a circular economy and the maximum use of natural resources. The article reflects the priority scientific and technological research on the involvement of technogenic mineral resources in efficient processing. Presented, developed at ICEMR RAS, including jointly with universities, research and production organizations and enterprises, modern innovative processes of deep and environmentally friendly processing of refractory mineral raw materials of complex material composition (tailings of enrichment of non-ferrous and noble metal ores, poor off-balance ores, slags ferrous and nonferrous metallurgy, sludge of metallurgical production) and hydro-mineral technogenic resources (acidic mineralized bottom-dump waters of mining enterprises of the copper-zinc complex of the Urals, saponite-containing circulating waters of diamond processing factories). Among other things, new directions in the field of selective disintegration of finely dispersed mineral raw materials based on energy effects and deep processing of slags are outlined; increasing the selectivity of enrichment processes; combined processing of technogenic raw materials; resource-saving processing of technogenic and hydro-mineral resources, obtaining secondary products from processing waste. It is shown that in the face of new economic challenges, Russia has sufficient scientific and technological potential in the field of deep and environmentally safe processing of technogenic raw materials in the form of developed and, to varying degrees, tested innovative resource-saving technologies that correspond to the world level, and in a number of technologies are superior to it.

scholarly journals PRODUCING OF NEW TYPES, FIRE-PROTECTIVE COATINGS BY THE USE OF HIGH DISPERSED COMPOSITE POWDERS OF LOCAL MINERAL RAW MATERIALS

InterConf ◽  
2021 ◽  
pp. 315-325
Author(s):  
Lali Gurchumelia ◽  
Murman Tsarakhov ◽  
Tengiz Machaladze ◽  
Dali Dzanashvili ◽  
Feliks Bezhanov ◽  
...  
Keyword(s):  
Technological Process ◽  
Flame Retardants ◽  
Building Materials ◽  
Raw Materials ◽  
Protective Coatings ◽  
Mechanical Mixing ◽  
Composite Powders ◽  
Performance Properties ◽  
Mineral Raw Materials ◽  
Environmentally Safe

The aim of this research is the fabrication of new types, environmentally safe, highly efficient and inexpensive fire-protective coatings by the use of high-dispersed composite powders (with high inhibitory properties) of local mineral raw materials, which in fire-protective coatings will play the role as binders as well as efficient inert flame retardants. Fire-protective coating was prepared only by mechanical mixing of binders and fillers, does not require addition of expensive phosphorus and halogen-containing flame retardants. On the one hand it simplifies technological process of production of materials and on the other hand decreases price cost of fire-protective coatings. Polyurethane resins were selected as binders, popularity of which is due to low price and simple technological process of production, high performance properties and low combustion capacity (in comparison with binders, used in series). High-dispersed composite powders of local mineral raw materials: zeolites, perlites, dolomites and clay shales are used as fillers, which are characterized by high inhibition properties and fire-extinguishing ability. Thus, produced coatings will be environmentally safe and much cheaper compared to imported analogues. Due to their performance properties and fire resistance, they will fully meet the requirements set by the normative documentation for building materials. The performance properties of the obtained fire–protective coatings were determined by laboratory standard methods. Thermogravimetric analysis method allows us to study the thermal stability of the material and determine the relative combustion capacity of the material. The effectiveness of the obtained coating was evaluated by the determine the relative combustion capacity - Oxygen Index (OI) and by of studying combustibility of materials. In the course of studying combustibility of materials in an initial stage was established combustible group by the method of "fire tube”- ГОСТ 1708-71.

scholarly journals Production and Performance Evaluation of Noble Fire Extinguishing Foam Suspensions Using Locally Available and Environmentally Friendly Natural Mineral Raw Materials

2020 ◽  
Vol 21 (1) ◽  
pp. 58-64
Author(s):  
Lali Gurchumelia ◽  
Murman Tsarakhov ◽  
Salome Tkemaladze ◽  
Feliks Bejanov ◽  
Lasha Tkemaladze
Keyword(s):  
Large Scale ◽  
Chemical Engineering ◽  
Raw Materials ◽  
Environmentally Friendly ◽  
Cost Effective ◽  
Mechanical Mixing ◽  
Mineral Raw Materials ◽  
Engineering Research ◽  
Fire Extinguishing ◽  
Halogen Free

The main goal of this research is the fabrication of halogen free, environmentally friendly fire-extinguishing powders using local mineral raw materials and the development of technological processes for producing highly efficient fire-extinguishing foam-suspensions on the basis of the produced powders. Fire-extinguishing powders are made by mechanical treatment and mixing of raw materials: zeolite, clay shale, perlite and ammophos. The process does not need introduction of expensive, halogen-containing, hydrophobizators and ensures the cost-effective production of fire-extinguishing powders. The obtained fire-extinguishing powders are characterized by high performance properties, high fire-extinguishing capacity and coefficient of atomic oxygen recombination. Thus, they are characterized both by homogeneous and heterogeneous inhibition of combustion processes. The efficiency of the produced powders is not inferior to that of standard powders of common production. In addition, in contrast to their traditional analogs they are halogen free, environmentally friendly and cheaper (1.2-2 times cheaper). The obtained powders, unlike the ones of conventional production, have good compatibility with water and foam. Our foam-suspensions are prepared just by mechanical mixing of fire-extinguishing powders with water and surface-active substances – foamers. The process does not require chemical treatment of materials. Thus, the developed technology is simple and cost-effective. The foam-suspensions produced on the basis of the obtained powders have higher heat capacity, permeability, wetting effect like water and foam and unlike them, they allow for homogeneous as well as heterogeneous inhibition of the burning process. Thus, the so produced foam-suspensions will have higher extinguishing effect than water, foams or powders, taken separately. Based on the above, it can be suggested that the produced powders can be used for extinguishing all types of fires, including large-scale ones in a combination with water and foams. Chemical Engineering Research Bulletin 21(2019) 58-64

DECONTAMINATION OF VETERINARY SURVEILLANCE OBJECTS BY NEW GENERATION MEDICINE

1970 ◽  
pp. 64-67
Author(s):  
М. S. Saypullaev ◽  
А. U. Koychuev ◽  
Т. B. Mirzoeva
Keyword(s):  
Staphylococcus Aureus ◽  
Inhalation Exposure ◽  
Gram Negative Bacteria ◽  
Hazard Class ◽  
E Coli ◽  
Highly Efficient ◽  
Mucous Membranes ◽  
Environmentally Safe ◽  
New Generation ◽  
And Staphylococcus Aureus

The successful conduct of disinfection measures largely depends on the availability of veterinary practice a highly efficient, environmentally safe disinfectants. In this regard, finding new highly efficient disinfectant remains relevant. Studies found that the "Polied" (OOO "Razvitie XXI Vek, Russia) can be attributed to the highly efficient and environmentally friendly means. Solutions "Polied" have a high disinfectant activity against smooth and rough surfaces in the laboratory against gram-positive, gram-negative bacteria, mycobacteria and spores of microorganisms. Studies have established that solutions should be "Polied" obezzarajivatmi E. coli (EA 1257) concentrations of 0.1% on smooth surfaces and Staphylococcus aureus concentration of 0.05% in 1 hour from the calculation of 0.25-0.3 litres/m2. Disinfection of rough test surfaces against Escherichia coli and Staphylococcus aureus occurred after treatment with 0,3% solution of 3-hour exposure, at a rate of 0.5 l/m2. It was also found that 1.0% solution "Polied" fully obezzarazhivatel test the surface of mycobacteria (PCs-5) and at double the 0.6% concentration for 24 hours. Disinfection of rough test surfaces contaminated with spores of B. cereus (PCs 96) was achieved with a 4.0% solution at twice the irrigation rate of 0.5 l/m2 at an exposure of 24 hours. Toxicity solutions of the drug "Polied" refer to "moderate" threat (hazard class 3) and low-hazard substances (4 hazard class) when applied to the skin, mucous membranes of the eyes, and inhalation exposure on the respiratory system.

Оrganic Meat Production of Broiler Chickens Hubbard Redbro Cross

2020 ◽  
Keyword(s):  
Broiler Chickens ◽  
Raw Materials ◽  
Animal Health ◽  
Meat Products ◽  
Poultry Meat ◽  
Meat Production ◽  
Significant Difference ◽  
Environmentally Safe ◽  
The Impact

This article presents the results of studying the impact of housing and feeding conditions on broiler chickens of Hubbard RedBro cross, as well as the quality of products obtained when using floor and cage content, in a farm. It established that when receiving a mixed feed of own production using feed raw materials grown on a farm without the use of pesticides, a statistically significant decrease in potentially dangerous substances for animal health is recorded. Compared with factory feed, it has reduced the content of pesticides by 14 times, and mercury and arsenic by 24 times, cadmium by five times, and lead by ten times. The results of the study of economic indicators of growing Hubbard RedBro cross broiler chickens, as well as the chemical composition and quality of carcasses, indicated that there was no significant difference between the floor and cell conditions of keeping. Still, the use of a diet based on eco-feeds contributed to a statistically significant decrease in the concentration of toxic metals in the muscles of the poultry of the experimental groups. As a result, it found that the use of the studied compound feed in the diets of broiler chickens increased the indicators of Biosafety and ensured the production of environmentally safe ("organic") poultry meat products.

scholarly journals Using maize wastes, fermented by co-cultures of Trichoderma harzianum and Pseudomonas fluorescens, as grain dressing against m maize diseases under field conditions

2020 ◽  
Vol 30 (1) ◽  
Author(s):  
Sherien M. M. Atalla ◽  
Mokhtar M. Abdel-Kader ◽  
Nadia G. El-Gamal ◽  
Nehal S. El-Mougy
Keyword(s):  
Pseudomonas Fluorescens ◽  
Trichoderma Harzianum ◽  
Raw Materials ◽  
Chitosan Nanoparticles ◽  
Field Conditions ◽  
Optimum Ratio ◽  
Transmission Electron ◽  
Environmentally Safe ◽  
The Mean ◽  
Uv Visible

Abstract Maize (Zea mays L.) is one of the most economic crops in Egypt. Production of amylase from the waste of maize is the most economic and cheap renewable and most abundant raw materials present in environment. Biosynthesis of Cu-chitosan nanoparticles for amylase production by co-culturing between Trichoderma harzianum and Pseudomonas fluorescens at different ratios compared to free conditions was the main purpose of this study. The optimum ratio 8:2, recorded between P. fluorescens: T. harzianum, was the most promising for production of amylase produce 22.47 and 28.60 U/ml for free and nano, respectively. The UV visible spectral analysis Cu-chitosan NPs was 220 nm, while the mean diameter, using transmission electron microscopy was 0.5 μm. Application of fermented maize wastes by co-cultivation of P. fluorescence and T. harzianum, as a grain dressing before sowing declared the reduction in both root and foliar diseases during the maize growing season, starting from germination up to 70 days of its vegetative growth under field conditions. A promising approach is the creation and use of environmentally safe products, whose protective effect is based on the induction of hydrolase inhibitors in plants.

Sign in / Sign up

Export Citation Format

Share Document