scholarly journals Biofiltration of methane: effect of temperature and nutrient solution

2009 ◽  
Author(s):  
C. Menard ◽  
A. Avalos Ramirez ◽  
J. Nikiema ◽  
M. Heitz
Keyword(s):  
Nutrient Solution ◽  
Effect Of Temperature

An Automatic Aeroponics Growth System for Bamboo Seedling and Root Observation

2013 ◽  
Vol 307 ◽  
pp. 97-102 ◽  
Author(s):  
Jing Liu ◽  
Yun Wei Zhang
Keyword(s):  
Root Growth ◽  
Nutrient Solution ◽  
Ultrafine Particles ◽  
Good Condition ◽  
Effect Of Temperature ◽  
Growth Environment ◽  
Growth System ◽  
Atomization Efficiency ◽  
Root Washing ◽  
Root Observation

According to the biological characteristics of bamboo seedling, an automatic aeroponics growth system is developed for bamboo seedling and root observation, which can prepare good condition of water-fertilizer, air and warm during bamboo seedling. The ultrasonic atomizer is used to atomize the nutrient solution to the ultrafine particles of 1-5 microns diameter. Compared with traditional piezometrical atomization, this method can not only improve atomization efficiency of nutrient solution to promote uniform absorption at the roots, but also avoid the phenomenon of root-washing. In addition, considering the significant effect of temperature and humidity on bamboo root growth, a temperature-humidity control system is designed for automatic control of water-fertilizer and temperature in bamboo root growth environment. The system supplies an experimental platform with features of simple structure and convenient control. In the procedure of bamboo seedling, bamboo rhizome and shoot can grow fast because of enough moisture nutrition, good breathing, and low growth resistance. Furthermore, it is also convenient for morphologic observation of bamboo roots.

scholarly journals Suppression of Powdery Mildew on Greenhouse-Grown Cucumber by Addition of Silicon to Hydroponic Nutrient Solution Is Inhibited at High Temperature

Plant Disease ◽  
2003 ◽  
Vol 87 (2) ◽  
pp. 177-185 ◽  
Author(s):  
Andrew C. Schuerger ◽  
William Hammer
Keyword(s):  
Powdery Mildew ◽  
Light Intensity ◽  
Nutrient Solution ◽  
Potassium Silicate ◽  
Disease Suppression ◽  
Effect Of Temperature ◽  
Rooting Medium ◽  
Canadian Studies ◽  
The Difference ◽  
Nutrient Solutions

Silicon amendments to hydroponic nutrient solutions have been used successfully in Canada to suppress powdery mildew (PM) caused by Sphaerotheca fuliginea on cucumber (Cucumis sativus). In contrast, preliminary trials in Florida greenhouses failed to achieve the level of disease suppression reported in the literature for Canadian studies. A series of greenhouse experiments were conducted in Florida to determine the factors involved in reducing the effectiveness of silicon amendments for PM suppression on cucumber. Three horticultural practices (cultivar, nutrient solution formula, and rooting medium) and two environmental factors (light intensity and temperature) were tested in combination with silicon amendments for their effects on the suppression of PM on cucumber. When plants were irrigated with a standard nutrient solution amended with potassium silicate at 0 mg/liter, the cucumber cv. Vetomil was found to be resistant and cvs. Corona, Cilla, Farbio, and Toska were found to be susceptible to PM. Susceptible cultivars irrigated with potassium silicate at 100, 150, or 200 mg/liter exhibited a slight but statistically significant reduction in PM over the course of a 49-day trial. Although PM in the cultivar trial was slightly lower in treatments with added silicon, disease suppression with silicon was not commercially useful because it failed to increase fruit yields. Nutrient solution formula, rooting medium, and light intensity had no effects on the levels of PM suppression, regardless of whether plants were irrigated with potassium silicate at 0 or 100 mg/liter. Temperature was found to act in a synergistic manner with silicon. The greatest effect of temperature on PM suppression was observed at 20°C in which cucumber plants, irrigated with silicon at 100 mg/liter, exhibited significant reductions in the numbers of PM colonies per leaf. Disease suppression by silicon was observed at 25 and 30°C, but the magnitude of the disease suppression was significantly lower than when plants were maintained at 20°C. The effect of temperature on PM suppression by silicon may explain the difference in results between previous experiments in Canada, where greenhouse temperatures averaged 20 to 25°C, and the current study in Florida, where greenhouse temperatures averaged 24 to 32°C.

Nucleation of Disorder in Fe3Al Alloys

1967 ◽  
Vol 25 ◽  
pp. 312-313
Author(s):  
P. R. Swann ◽  
W. R. Duff ◽  
R. M. Fisher
Keyword(s):  
Electron Microscopy ◽  
Transmission Electron Microscopy ◽  
Annealing Temperature ◽  
Antiphase Domain ◽  
Effect Of Temperature ◽  
Domain Structures ◽  
Transmission Electron ◽  
Domain Boundaries ◽  
Higher Temperature ◽  
The One

Recently we have investigated the phase equilibria and antiphase domain structures of Fe-Al alloys containing from 18 to 50 at.% Al by transmission electron microscopy and Mössbauer techniques. This study has revealed that none of the published phase diagrams are correct, although the one proposed by Rimlinger agrees most closely with our results to be published separately. In this paper observations by transmission electron microscopy relating to the nucleation of disorder in Fe-24% Al will be described. Figure 1 shows the structure after heating this alloy to 776.6°C and quenching. The white areas are B2 micro-domains corresponding to regions of disorder which form at the annealing temperature and re-order during the quench. By examining specimens heated in a temperature gradient of 2°C/cm it is possible to determine the effect of temperature on the disordering reaction very precisely. It was found that disorder begins at existing antiphase domain boundaries but that at a slightly higher temperature (1°C) it also occurs by homogeneous nucleation within the domains. A small (∼ .01°C) further increase in temperature caused these micro-domains to completely fill the specimen.

The effect of temperature on high-resolution TEM image contrast

1995 ◽  
Vol 53 ◽  
pp. 640-641
Author(s):  
T. Geipel ◽  
W. Mader ◽  
P. Pirouz
Keyword(s):  
Form Factor ◽  
Inelastic Scattering ◽  
Accurate Method ◽  
Waller Factor ◽  
Effect Of Temperature ◽  
Specimen Thickness ◽  
Influence Of Temperature ◽  
Debye Waller Factor ◽  
Influence Of Temperature On ◽  
Atomic Form Factor

Temperature affects both elastic and inelastic scattering of electrons in a crystal. The Debye-Waller factor, B, describes the influence of temperature on the elastic scattering of electrons, whereas the imaginary part of the (complex) atomic form factor, fc = fr + ifi, describes the influence of temperature on the inelastic scattering of electrons (i.e. absorption). In HRTEM simulations, two possible ways to include absorption are: (i) an approximate method in which absorption is described by a phenomenological constant, μ, i.e. fi; - μfr, with the real part of the atomic form factor, fr, obtained from Hartree-Fock calculations, (ii) a more accurate method in which the absorptive components, fi of the atomic form factor are explicitly calculated. In this contribution, the inclusion of both the Debye-Waller factor and absorption on HRTEM images of a (Oll)-oriented GaAs crystal are presented (using the EMS software.Fig. 1 shows the the amplitudes and phases of the dominant 111 beams as a function of the specimen thickness, t, for the cases when μ = 0 (i.e. no absorption, solid line) and μ = 0.1 (with absorption, dashed line).

The development of dormancy in bulblets of Lilium speciosum generated in vitro. II. The effect of temperature

1990 ◽  
Vol 80 (3) ◽  
pp. 431-436 ◽  
Author(s):  
Isabelle Delvallee ◽  
Annie Paffen ◽  
Geert-Jan De Klerk
Keyword(s):  
Effect Of Temperature ◽  
Lilium Speciosum

Effect of Temperature on ADP-Induced Platelet Aggregation

1973 ◽  
Vol 29 (01) ◽  
pp. 183-189
Author(s):  
C. A Praga ◽  
E. M Pogliani
Keyword(s):  
Platelet Aggregation ◽  
Incubation Period ◽  
Room Temperature ◽  
Important Variable ◽  
Practical Significance ◽  
Effect Of Temperature ◽  
Induce Platelet Aggregation ◽  
Cuvette Holder ◽  
Exact Temperature

SummaryTemperature represents a very important variable in ADP-induced platelet aggregation.When low doses of ADP ( < 1 (μM) are used to induce platelet aggregation, the length of the incubation period of PRP in the cuvette holder of the aggregometer, thermostatted at 37° C, is very critical. Samples of the same PRP previously kept at room temperature, were incubated for increasing periods of time in the cuvette of the aggregometer before adding ADP, and a significant decrease of aggregation, proportional to the length of incubation, was observed. Stirring of the PRP during the incubation period made these changes more evident.To measure the exact temperature of the PRP during incubation in the aggre- gometer, a thermocouple device was used. While the temperature of the cuvette holder was stable at 37° C, the PRP temperature itself increased exponentially, taking about ten minutes from the beginning of the incubation to reach the value of 37° C. The above results have a practical significance in the reproducibility of the platelet aggregation test in vitro and acquire particular value when the effect of inhibitors of ADP induced platelet aggregation is studied.Experiments carried out with three anti-aggregating agents (acetyl salicyclic acid, dipyridamole and metergoline) have shown that the incubation conditions which influence both the effect of the drugs on platelets and the ADP breakdown in plasma must be strictly controlled.

Effect of Temperature, Velocity Gradient and I.V. Heparin on in Vitro Blood Coagulation and Platelet Aggregation

1967 ◽  
Vol 17 (01/02) ◽  
pp. 112-119 ◽  
Author(s):  
L Dintenfass ◽  
M. C Rozenberg
Keyword(s):  
Blood Coagulation ◽  
Velocity Gradient ◽  
Elevated Temperatures ◽  
Morphological Changes ◽  
Effect Of Temperature ◽  
Clotting Time ◽  
Progressive Change ◽  
Aggregation Of Platelets ◽  
Microscopic Techniques

SummaryA study of blood coagulation was carried out by observing changes in the blood viscosity of blood coagulating in the cone-in-cone viscometer. The clots were investigated by microscopic techniques.Immediately after blood is obtained by venepuncture, viscosity of blood remains constant for a certain “latent” period. The duration of this period depends not only on the intrinsic properties of the blood sample, but also on temperature and rate of shear used during blood storage. An increase of temperature decreases the clotting time ; also, an increase in the rate of shear decreases the clotting time.It is confirmed that morphological changes take place in blood coagula as a function of the velocity gradient at which such coagulation takes place. There is a progressive change from the red clot to white thrombus as the rates of shear increase. Aggregation of platelets increases as the rate of shear increases.This pattern is maintained with changes of temperature, although aggregation of platelets appears to be increased at elevated temperatures.Intravenously added heparin affects the clotting time and the aggregation of platelets in in vitro coagulation.

Sign in / Sign up

Export Citation Format

Share Document