scholarly journals Performance of a solar PV tracking system on tropic regions

2015 ◽  
Author(s):  
Y. Garcia ◽  
O. Diaz ◽  
C. Agudelo
Keyword(s):  
Tracking System ◽  
Solar Pv

Design, Development and Performance Test of Two-Axis Solar Tracker System

2014 ◽  
Vol 704 ◽  
pp. 350-354
Author(s):  
Muhammad Ikram Mohd Rashid ◽  
Nik Fadhil bin Nik Mohammed ◽  
Suliana binti Ab Ghani ◽  
Noor Asiah Mohamad
Keyword(s):  
Tilt Angle ◽  
Solar Collector ◽  
Performance Test ◽  
Tracking System ◽  
Electrical Power ◽  
Solar Thermal ◽  
The Sun ◽  
Solar Pv ◽  
Design Development ◽  
Solar Tracking

The energy extracted from photovoltaic (PV) or solar thermal depends on solar insolation. For the extraction of maximum energy from the sun, the plane of the solar collector should always be normal to the incident radiation. Sun trackers move the solar collector to follow the sun trajectories and keep the orientation of the solar collector at an optimal tilt angle. Energy efficiency of solar PV or solar thermal can be substantially improved using solar tracking system. In this paper, an automatic solar tracking system has been designed and developed using DC motor on a mechanical structure with gear arrangement. The movements of two-axis solar trackers for the elevation and azimuth angles are programmed according to the mathematical calculation by using the Borland C++ Builder. Performance of the proposed system over the important parameter like solar radiation received on the collector, maximum hourly electrical power has been evaluated and compared with those for fixed tilt angle solar collector.

Techno-Economic Study of Installing 10 MW PV Power Plant in Sudan

2016 ◽  
Author(s):  
Ahmed Abuelyamen ◽  
Mohand H. Mohamed
Keyword(s):  
Power Plant ◽  
Solar Radiation ◽  
Financial Analysis ◽  
Tracking System ◽  
Electric Energy ◽  
High Ratio ◽  
Climatic Data ◽  
Solar Pv ◽  
Ghg Reduction ◽  
Fixed System

This work investigates the installation of a 10 MW solar PV power plant in a sustainable city in Sudan. Initially, the climatic data such as relative humidity, temperature and horizontal solar radiation over 30 cities in Sudan were collected from NASA web page, then the behavior of all climatic data was analyzed. Annual daily solar radiation on a tilted surface was also calculated over the 30 locations around the country. It was found that the maximum value of tilted average solar radiation is 6.61 KWh/day at Dungola from fixed mode and 8.93 kWh/m2/day from tracking mode. Consequently, the location was selected as an optimum spot for building the solar PV power plant. Additionally, the available solar PV panels on the market were judged according to the maximum module efficiency and high ratio value of module capacity to frame area. The project lifetime is considered as 25 years. RETScreen v.4 software was used to simulate the feasibility analysis of the project based on electric power generated from fixed and tracking modes of operation, financial analysis and greenhouse gas emissions. The study showed that, technically, the proposed plant can generate up to 16.209 GWh of electric energy annually from the fixed system and 21.828 GWh from the tracking system. Environmentally, the annual net GHG reduction is 16,000 and 21,600 tons of CO2 from fixed and tracking systems respectively. From a financial standpoint, the cost-effective indicators were calculated and it was found that the IRR and payback period for the fixed system plant were 0.6% and 23.6 years, respectively. While for tracking system plant, figures were 2.66% and 19.4 years, respectively.

Output Power Enhancement of Solar PV Panel Using Solar Tracking System

2019 ◽  
Vol 12 (1) ◽  
pp. 45-49
Author(s):  
Abhishek Kumar Tripathi ◽  
Mangalpady Aruna ◽  
Ch. S.N. Murthy
Keyword(s):  
Solar Radiation ◽  
Output Power ◽  
Tracking System ◽  
The Sun ◽  
Solar Pv ◽  
Design Development ◽  
Pv Panel ◽  
Solar Tracking ◽  
Power Enhancement ◽  
Panel Surface

Solar Photovoltaic (PV) energy conversion has gained much attention nowadays. The output power of PV panel depends on the condition under which the panel is working, such as solar radiation, ambient temperature, dust, wind speed and humidity. The amount of falling sunlight on the panel surface (i.e., solar radiation) directly affects its output power. In order to maximize the amount of falling sunlight on the panel surface, a solar tracking PV panel system is introduced. This paper describes the design, development and fabrication of the solar PV panel tracking system. The designed solar tracking system is able to track the position of the sun throughout the day, which allows more sunlight falling on the panel surface. The experimental results show that there was an enhancement of up to a 64.72% in the output power of the PV panel with reference to the fixed orientation PV panel. Further, this study also demonstrates that the full load torque of the tracking system would be much higher than the obtained torque, which is required to track the position of the sun. This propounds, that the proposed tracking system can also be used for a higher capacity PV power generation system.

MEDIUM SIZE DUAL-AXIS SOLAR TRACKING SYSTEM WITH SUNLIGHT INTENSITY COMPARISON METHOD AND FUZZY LOGIC IMPLEMENTATION

2015 ◽  
Vol 77 (17) ◽  
Author(s):  
Azwaan Zakariah ◽  
Mahdi Faramarzi ◽  
Jasrul Jamani Jamian ◽  
Mohd Amri Md Yunus
Keyword(s):  
Fuzzy Logic ◽  
Solar Irradiance ◽  
Fuzzy Logic Controller ◽  
Solar Power ◽  
Tracking System ◽  
Medium Size ◽  
The Sun ◽  
Solar Pv ◽  
Pv Panel ◽  
Solar Tracking

Nowadays, renewable energy such as solar power has become important for electricity generation, and solar power systems have been installed in homes. Furthermore, solar tracking systems are being continuously improved by researchers around the world, who focus on achieving the best design and thus maximizing the efficiency of the solar power system. In this project, a fuzzy logic controller has been integrated and implemented in a medium-scale solar tracking system to achieve the best real-time orientation of a solar PV panel toward the sun. This project utilized dual-axis solar tracking with a fuzzy logic intelligent method. The hardware system consists of an Arduino UNO microcontroller as the main controller and Light Dependent Resistor (LDR) sensors for sensing the maximum incident intensity of solar irradiance. Initially, two power window motors (one for the horizontal axis and the other for the vertical axis) coordinate and alternately rotate to scan the position of the sun. Since the sun changes its position all the time, the LDR sensors detect its position at five-minute intervals through the level of incident solar irradiance intensity measured by them. The fuzzy logic controller helps the microcontroller to give the best inference concerning the direction to which the solar PV panel should rotate and the position in which it should stay. In conclusion, the solar tracking system delivers high efficiency of output power with a low power intake while it operates.

Maximum Power Point Tracking for Solar PV System

2011 ◽  
Vol 110-116 ◽  
pp. 2034-2037
Author(s):  
Subhash Gupta ◽  
S. Kalika ◽  
R. Cabigting Luisito
Keyword(s):  
Solar Energy ◽  
Collection Efficiency ◽  
Tracking System ◽  
Electrical Power ◽  
The Sun ◽  
Solar Pv ◽  
High Concentration ◽  
Pv System ◽  
Point Tracking ◽  
Potential System

Solar energy systems have emerged as a viable source of renewable energy over the past two or three decades, and are now widely used for a variety of industrial and domestic applications. This paper shows the potential system benefits of simple tracking solar system using a stepper motor and light sensor. This method is increasing power collection efficiency by developing a device that tracks the sun to keep the panel at a right angle to its rays. Such systems are based on a solar collector, designed to collect the sun’s energy and to convert it into either electrical power or thermal energy The output power produced by high-concentration solar thermal and photovoltaic systems is directly related to the amount of solar energy acquired by the system, and it is therefore necessary to track the sun’s position with a high degree of accuracy. The power developed in such applications depends fundamentally upon the amount of solar energy captured by the collector, and thus the problem of developing tracking schemes capable of following the trajectory of the sun throughout the course of the day on a year-round basis has received significant coverage in the literature. A solar tracking system is designed, implemented and experimentally tested. The design details and the experimental results are incorporated in this paper.

scholarly journals Improving the Efficiency of Stand-Alone Solar PV Power Plants

2021 ◽  
Vol 16 (3) ◽  
pp. 403-412
Author(s):  
Artur Akhmetshin ◽  
Midhat Tuhvatullin ◽  
Dinar Atnagulov ◽  
Andrey Linenko ◽  
Bulat Khalilov
Keyword(s):  
Control System ◽  
Tracking System ◽  
Electrical Energy ◽  
Solar Photovoltaic ◽  
The Sun ◽  
Solar Pv ◽  
Solar Access ◽  
Photovoltaic Plant ◽  
Energy Instability ◽  
Plant Control

As a source of alternative energy, solar energy has apparent advantages, including a renewable, inexhaustible, and environmentally friendly resource. However, it has not become widely spread in the Russian Federation. Among the disadvantages of using solar energy are high equipment cost, low efficiency of photovoltaic solar cells, the generated electrical energy instability. The spatio-temporal variability of solar access causes electrical energy instability. It is possible to increase solar photovoltaic plant efficiency by using a tracking system to change the plant sun's spatial orientation. The paper offers mathematical and simulation models of a solar photovoltaic plant with a solar tracking system that allows the plant to be automatically oriented to the sun by matching the production mode and the solar access level. The use of the azimuth plant control system on the sun will increase the power production of the solar PV plant by an average of 28%. The same value will increase by 40% when using the full plant control system.

A simple tracking system to monitor solar PV panels

2014 ◽  
Vol 78 ◽  
pp. 872-875 ◽  
Author(s):  
H. Bentaher ◽  
H. Kaich ◽  
N. Ayadi ◽  
M. Ben Hmouda ◽  
A. Maalej ◽  
...  
Keyword(s):  
Tracking System ◽  
Solar Pv
Sign in / Sign up

Export Citation Format

Share Document