scholarly journals Cyperus longusL. as a biological purifier of wastewater for irrigation purposes: removal efficiency and Zn, Cd, Cu, Fe and Mn

2013 ◽  
Author(s):  
D. G. A. Ganjo ◽  
H. A. Mirza
Keyword(s):  
Removal Efficiency ◽  
Fe And Mn

scholarly journals The removal efficiency of iron and manganese from pre-ozonated groundwater using limestone filter

2020 ◽  
Vol 55 (2) ◽  
pp. 167-183
Author(s):  
Hamidi Abdul Aziz ◽  
Shahanis Nabila Mohd Shakr ◽  
Nor Azliza Akbar ◽  
Motasem Y. D. Alazaiza
Keyword(s):  
Removal Efficiency ◽  
Contact Time ◽  
Treatment Plant ◽  
Water Treatment Plant ◽  
Breakthrough Time ◽  
Groundwater Samples ◽  
Fe And Mn ◽  
Good Potential ◽  
Maximum Removal ◽  
Iron And Manganese

Abstract This paper investigates the suitability of limestone to attenuate Fe and Mn from pre-ozonated groundwater samples using batch study and fixed column bed. The effects of limestone dosage, shaking speed, contact time, and pH on the removal efficiency of Fe and Mn are discussed. Pre-ozonated groundwater samples were prepared to present actual samples from Pintu Geng water treatment plant. A general characterization for groundwater as well as for limestone was conducted. In addition, the breakthrough and exhaustion points for limestone were determined. Results showed that limestone has good potential to remove more than 90% of Fe and Mn at optimum dosage of 40 g. The removal percentage for both metals was also affected by changing the contact time, where the maximum removal of Fe and Mn was observed at 90 and 120 minutes, respectively, at pH 8 and shaking speed of 350 rpm. The breakthrough time and exhaustion time of Fe were 40 hours and 210 hours, respectively. However, faster breakthrough time (30 minutes) and exhaustion time (16 hours) were observed for Mn sorption. The findings showed that an integrated ozone-limestone adsorption process significantly enhanced the removal of Fe and Mn up to 99.5% and 92%, respectively.

Valence state analysis of elements by EPMA and its application

1990 ◽  
Vol 48 (2) ◽  
pp. 230-231
Author(s):  
Chen Liqing ◽  
Liu Zuqin ◽  
Zhang Wei
Keyword(s):  
Valence State ◽  
Line Intensities ◽  
Valence States ◽  
Valence Electrons ◽  
Fe And Mn ◽  
Intensity Ratios ◽  
State Analysis

Valence state analyses of Fe and Mn in oxides by EPMA have been reported in literature. In this paper, the effects of valence state on intensity ratios ILα/IKα and ILα/ILβ of Cu, Ni, Co, Fe, Mn, Cr and their oxides, and on intensity ratios ILβ2/ILα1 and ILγ1/ILα1 of Mo, Nb, Zr and their oxides were studied. It was observed that intensity ratios change with valence states in accordance with some regularities, and these effects could be utilized for analyzing the valence states of catalysts.Valence state analysis of elements by EPMA is based on the fact that changes in the states of valence electrons in the outer shells of an atom cause corresponding changes in line intensities. The M electrons of Cu, Ni, Co, Fe, Mn, Cr and the N electrons of Mo, Nb, Zr are valence electrons. Line Kα1,2 and six lines of L are produced from the transitions of K-L2,3 and L-M or L-N respectively.

Degradation of 2,4-dichlorophenol by melamine amine celluloseimmobilized lacasses

TAPPI Journal ◽  
2017 ◽  
Vol 16 (10) ◽  
pp. 559-564 ◽  
Author(s):  
ZHEN WANG ◽  
PINGPING BIN ◽  
YING LIU ◽  
YU LIU ◽  
GUIHUA YANG ◽  
...  
Keyword(s):  
Enzymatic Activity ◽  
Removal Efficiency ◽  
Immobilized Laccase ◽  
Dialdehyde Cellulose

Epoxidized dialdehyde cellulose (EDC) was prepared and grafted with melamine to obtain melamine grafted epoxidized dialdehyde cellulose (EDC-melamine); the products were characterized by various methods and were used as carriers to immobilize laccase. Results show EDC-melamine can immobilize laccase effectively and have higher enzymatic activity compared with EDC. Furthermore, the enzymatic activity of EDC-melamine was found to be as high as 865 U•mg-1, compared with 140U•mg-1 for EDC. The removal efficiency of 2,4-dichlorophenol (2,4-DCP) for EDC-melamine immobilized laccase was about 71.5% at 40°C for 4 h at 10.0 mg•L-1 and dosage of laccase = 0.2 g/L. The removal efficiency can remain greater than 63%, even after six cycles.

The assessment of particulate matter (PM2.5) removal efficiency on air cleaner products through full scale test in Korea

2019 ◽  
Vol 18 (1) ◽  
pp. 76-80 ◽  
Author(s):  
Kichul Kim ◽  
Pil-Ju Park ◽  
Soomi Eo ◽  
Seungmi Kwon ◽  
Kwangrae Kim ◽  
...  
Keyword(s):  
Particulate Matter ◽  
Removal Efficiency ◽  
Full Scale ◽  
Full Scale Test ◽  
Air Cleaner ◽  
Scale Test

Bioadsorption of Multiple Heavy Metal Ions by Rhizophora Apiculate sp. and Elaesis Guineensis sp.

2017 ◽  
Vol 14 (1) ◽  
pp. 15
Author(s):  
M.B. Nicodemus Ujih ◽  
Mohammad Isa Mohamadin ◽  
Milla-Armila Asli ◽  
Bebe Norlita Mohammed
Keyword(s):  
Heavy Metal ◽  
Metal Ions ◽  
Removal Efficiency ◽  
Heavy Metal Ions ◽  
Agricultural Waste ◽  
Living Organism ◽  
Heavy Metal Concentration ◽  
Industrial Area ◽  
Electrochemical Treatment ◽  
Chemical Oxidation

Heavy metal ions contamination has become more serious which is caused by the releasing of toxic water from industrial area and landfill that are very harmful to all living organism especially human and can even cause death if contaminated in small amount of heavy metal concentration. Currently, peoples are using classic method namely electrochemical treatment, chemical oxidation/reduction, chemical precipitation and reverse osmosis to eliminate the metal ions from toxic water. Unfortunately, these methods are costly and not environmentally friendly as compared to bioadsorption method, where agricultural waste is used as biosorbent to remove heavy metals. Two types of agricultural waste used in this research namely oil palm mesocarp fiber (Elaesis guineensis sp.) (OPMF) and mangrove bark (Rhizophora apiculate sp.) (MB) biomass. Through chemical treatment, the removal efficiency was found to improve. The removal efficiency is examined based on four specification namely dosage, of biosorbent to adsorb four types of metals ion explicitly nickel, lead, copper, and chromium. The research has found that the removal efficiency of MB was lower than OPMF; whereas, the multiple metals ions removal efficiency decreased in the order of Pb2+ > Cu2+ > Ni2+ > Cr2+.

Evaluation of Nutrients Removal Efficiency on the River Simulation with the EM Media Packing

2019 ◽  
Vol 20 (5) ◽  
pp. 302-312
Author(s):  
Su Hyun Bae ◽  
Chan Seo You ◽  
Young Kyu Kim ◽  
Cheong Jo Cheong ◽  
Deog Gwan Ra
Keyword(s):  
Removal Efficiency ◽  
Nutrients Removal

REVIEWS OF ELECTROCOAGULATION PROCESS ON WASTE WATER TREATMENT TECHNOLOGY

2017 ◽  
Vol 9 (1) ◽  
Author(s):  
Taty Hernaningsih
Keyword(s):  
Waste Water ◽  
Water Treatment ◽  
Removal Efficiency ◽  
Industrial Waste ◽  
Waste Water Treatment ◽  
Treatment Technique ◽  
Industrial Waste Water ◽  
Strong Current ◽  
Current Voltage ◽  
Electrocoagulation Process

Waste water treatment by industry usually uses chemicals that may lead to additional environmental pollution load. On the other hand, water demand increases and environmental regulations regarding waste water disposal requirements that apply more stringent. It is necessary for waste treatment technique that accommodate this requirement. Electrocoagulation process is a technique of wastewater treatment that has been chosen because the technique is environmentally friendly. This paper will review some of the research or application electrocoagulation process which is conducted on industrial waste water. Types of industrial waste water that is to be reviewed include: industries batik, sarongs, textiles, palm oil, slaughterhouses, food, leather tanning, laundry, pulp and paper. Overview reviewed in this research include the waste water treatment process in several processing variations such as: change in time, electricity and kind of electrodes. The results of the research with electrocoagulation process in the industry are the removal efficiency of TSS, COD, BOD5, Chrome, phosphate, surfactants, color turbidity influenced by several factors including time, strong current, voltage, distance and type of electrode and pH. The results of the study with electrocoagulation process in the industry is the removal efficiency of TSS, COD, BOD5, chromium, phosphate, surfactant, turbidity color that are influenced by several factors including time, strong current, voltage, distance and type of electrode and pH. It is hoped the information presented in this article can be a reference for similar research for the improvement of research on the process ektrokoagulasi.Key words: elektrocoagulation, removal eficiency, environmental friendly

Sign in / Sign up

Export Citation Format

Share Document