scholarly journals Assessment of the plume theory predictions of crown scorch or crown fire initiation using transport models

2009 ◽  
Author(s):  
V. Konovalov ◽  
J.-L. Dupuy ◽  
F. Pimont ◽  
D. Morvan ◽  
R. R. Linn
Keyword(s):  
Crown Fire ◽  
Transport Models ◽  
Crown Scorch ◽  
Fire Initiation

Interdependencies between flame length and fireline intensity in predicting crown fire initiation and crown scorch height

2012 ◽  
Vol 21 (2) ◽  
pp. 95 ◽  
Author(s):  
Martin E. Alexander ◽  
Miguel G. Cruz
Keyword(s):  
Wildland Fire ◽  
Stem Bark ◽  
Flame Length ◽  
Flame Height ◽  
Crown Fire ◽  
Fire Behaviour ◽  
Surface Fire ◽  
Crown Scorch ◽  
Fire Initiation ◽  
Bark Char

This state-of-knowledge review examines some of the underlying assumptions and limitations associated with the inter-relationships among four widely used descriptors of surface fire behaviour and post-fire impacts in wildland fire science and management, namely Byram’s fireline intensity, flame length, stem-bark char height and crown scorch height. More specifically, the following topical areas are critically examined based on a comprehensive review of the pertinent literature: (i) estimating fireline intensity from flame length; (ii) substituting flame length for fireline intensity in Van Wagner’s crown fire initiation model; (iii) the validity of linkages between the Rothermel surface fire behaviour and Van Wagner’s crown scorch height models; (iv) estimating flame height from post-fire observations of stem-bark char height; and (v) estimating fireline intensity from post-fire observations of crown scorch height. There has been an overwhelming tendency within the wildland fire community to regard Byram’s flame length–fireline intensity and Van Wagner’s crown scorch height–fireline intensity models as universal in nature. However, research has subsequently shown that such linkages among fire behaviour and post-fire impact characteristics are in fact strongly influenced by fuelbed structure, thereby necessitating consideration of fuel complex specific-type models of such relationships.

Corrigendum to: Interdependencies between flame length and fireline intensity in predicting crown fire initiation and crown scorch height

2017 ◽  
Vol 26 (4) ◽  
pp. 345 ◽  
Author(s):  
Martin E. Alexander ◽  
Miguel G. Cruz
Keyword(s):  
Wildland Fire ◽  
Stem Bark ◽  
Flame Length ◽  
Flame Height ◽  
Crown Fire ◽  
Fire Behaviour ◽  
Surface Fire ◽  
Crown Scorch ◽  
Fire Initiation ◽  
Bark Char

This state-of-knowledge review examines some of the underlying assumptions and limitations associated with the inter-relationships among four widely used descriptors of surface fire behaviour and post-fire impacts in wildland fire science and management, namely Byram's fireline intensity, flame length, stem-bark char height and crown scorch height. More specifically, the following topical areas are critically examined based on a comprehensive review of the pertinent literature: (i) estimating fireline intensity from flame length; (ii) substituting flame length for fireline intensity in Van Wagner's crown fire initiation model; (iii) the validity of linkages between the Rothermel surface fire behaviour and Van Wagner's crown scorch height models; (iv) estimating flame height from post-fire observations of stem-bark char height; and (v) estimating fireline intensity from post-fire observations of crown scorch height. There has been an overwhelming tendency within the wildland fire community to regard Byram's flame length–fireline intensity and Van Wagner's crown scorch height–fireline intensity models as universal in nature. However, research has subsequently shown that such linkages among fire behaviour and post-fire impact characteristics are in fact strongly influenced by fuelbed structure, thereby necessitating consideration of fuel complex specific-type models of such relationships.

Simulated fire behaviour in young, postfire lodgepole pine forests

2017 ◽  
Vol 26 (10) ◽  
pp. 852 ◽  
Author(s):  
Kellen N. Nelson ◽  
Monica G. Turner ◽  
William H. Romme ◽  
Daniel B. Tinker
Keyword(s):  
Pinus Contorta ◽  
Stand Structure ◽  
Lodgepole Pine ◽  
Pine Forests ◽  
Fuel Moisture ◽  
Crown Fire ◽  
Fire Behaviour ◽  
Fire Initiation ◽  
Moisture Conditions ◽  
Simulated Fire

Early-seral forests are expanding throughout western North America as fire frequency and annual area burned increase, yet fire behaviour in young postfire forests is poorly understood. We simulated fire behaviour in 24-year-old lodgepole pine (Pinus contorta var. latifolia) stands in Yellowstone National Park, Wyoming, United States using operational models parameterised with empirical fuel characteristics, 50–99% fuel moisture conditions, and 1–60kmhr−1 open winds to address two questions: [1] How does fireline intensity, and crown fire initiation and spread vary among young, lodgepole pine stands? [2] What are the contributions of fuels, moisture and wind on fire behaviour? Sensitivity analysis indicated the greatest contributors to output variance were stand structure mediated wind attenuation, shrub fuel loads and 1000-h fuel moisture for fireline intensity; crown base height for crown fire initiation; and crown bulk density and 1-h fuel moisture for crown fire spread. Simulation results predicted crown fire (e.g. passive, conditional or active types) in over 90% of stands at 50th percentile moisture conditions and wind speeds greater than 3kmhr−1. We conclude that dense canopy characteristics heighten crown fire potential in young, postfire lodgepole pine forests even under less than extreme wind and fuel moisture conditions.

Experimental modelling of crown fire initiation in open and closed shrubland systems

2014 ◽  
Vol 23 (4) ◽  
pp. 451 ◽  
Author(s):  
Watcharapong Tachajapong ◽  
Jesse Lozano ◽  
Shankar Mahalingam ◽  
David R. Weise
Keyword(s):  
Energy Transfer ◽  
Wind Speed ◽  
Wind Tunnel ◽  
Air Entrainment ◽  
Convective Heating ◽  
Crown Fire ◽  
Number Range ◽  
Surface Fire ◽  
Open Environment ◽  
Fire Initiation

The transition of surface fire to live shrub crown fuels was studied through a simplified laboratory experiment using an open-topped wind tunnel. Respective surface and crown fuels used were excelsior (shredded Populus tremuloides wood) and live chamise (Adenostoma fasciculatum, including branches and foliage). A high crown fuel bulk density of 6.8kgm–3 with a low crown fuel base height of 0.20m was selected to ensure successful crown fire initiation. Diagnostics included flame height and surface fire evolution. Experimental results were compared with similar experiments performed in an open environment, in which the side walls of the wind tunnel were removed. The effect of varying wind speed in the range 0–1.8ms–1, representing a Froude number range of 0–1.1, on crown fire initiation was investigated. The suppression of lateral entrainment due to wind tunnel walls influenced surface fire behaviour. When wind speed increased from 1.5 to 1.8ms–1, the rate of spread of surface fire and surface fire depth increased from 5.5 to 12.0cms–1 and 0.61 to 1.02m. As a result, the residence time of convective heating significantly increased from 16.0 to 24.0s and the hot gas temperature at the crown base increased from 994 to 1141K. The change in surface fire characteristics significantly affected the convective energy transfer process. Thus, the net energy transfer to the crown fuel increased so the propensity for crown fire initiation increased. In contrast, increasing wind speed decreased the tendency for crown fuel initiation in an open environment because of the cooling effect from fresh air entrainment via the lateral sides of surface fire.

scholarly journals Assessment of crown fire initiation and spread models in Mediterranean conifer forests by using data from field and laboratory experiments

2017 ◽  
Vol 26 (2) ◽  
pp. e02S ◽  
Author(s):  
Francisco Rodríguez y Silva ◽  
Mercedes Guijarro ◽  
Javier Madrigal ◽  
Enrique Jiménez ◽  
Juan R. Molina ◽  
...  
Keyword(s):  
Fire Spread ◽  
Full Scale ◽  
Research Centre ◽  
Crown Fire ◽  
Fire Behaviour ◽  
Bench Scale ◽  
Fire Experiment ◽  
Fire Initiation ◽  
Scale Experiment

Aims of study: To conduct the first full-scale crown fire experiment carried out in a Mediterranean conifer stand in Spain; to use different data sources to assess crown fire initiation and spread models, and to evaluate the role of convection in crown fire initiation.Area of study: The Sierra Morena mountains (Coordinates ETRS89 30N: X: 284793-285038; Y: 4218650-4218766), southern Spain, and the outdoor facilities of the Lourizán Forest Research Centre, northwestern Spain.Material and methods: The full-scale crown fire experiment was conducted in a young Pinus pinea stand. Field data were compared with data predicted using the most used crown fire spread models. A small-scale experiment was developed with Pinus pinaster trees to evaluate the role of convection in crown fire initiation. Mass loss calorimeter tests were conducted with P. pinea needles to estimate residence time of the flame, which was used to validate the crown fire spread model.Main results: The commonly used crown fire models underestimated the crown fire spread rate observed in the full-scale experiment, but the proposed new integrated approach yielded better fits. Without wind-forced convection, tree crowns did not ignite until flames from an intense surface fire contacted tree foliage. Bench-scale tests based on radiation heat flux therefore offer a limited insight to full-scale phenomena.Research highlights: Existing crown fire behaviour models may underestimate the rate of spread of crown fires in many Mediterranean ecosystems. New bench-scale methods based on flame buoyancy and more crown field experiments allowing detailed measurements of fire behaviour are needed.

Modelling canopy fuel variables for Pinus radiata D. Don in NW Spain with low-density LiDAR data

2014 ◽  
Vol 23 (3) ◽  
pp. 350 ◽  
Author(s):  
Eduardo González-Ferreiro ◽  
Ulises Diéguez-Aranda ◽  
Felipe Crecente-Campo ◽  
Laura Barreiro-Fernández ◽  
David Miranda ◽  
...  
Keyword(s):  
Pinus Radiata ◽  
Airborne Lidar ◽  
Lidar Data ◽  
Low Density ◽  
Crown Fire ◽  
Fire Behaviour ◽  
Fuel Characteristics ◽  
Fire Initiation ◽  
Behaviour Simulation ◽  
Simulation Systems

Crown fire initiation and spread are key elements in gauging fire behaviour potential in conifer forests. Crown fire initiation and spread models implemented in widely used fire behaviour simulation systems such as FARSITE and FlamMap require accurate spatially explicit estimation of canopy fuel complex characteristics. In the present study, we evaluated the potential use of very low-density airborne LiDAR (light detection and ranging) data (0.5 first returns m–2) – which is freely available for most of the Spanish territory – to estimate canopy fuel characteristics in Pinus radiata D. Don stands in north-western Spain. Regression analysis indicated strong relationships (R2=0.82–0.98) between LiDAR-derived metrics and field-based fuel estimates for stand height, canopy fuel load, and average and effective canopy base height Average and effective canopy bulk density (R2=0.59–0.70) were estimated indirectly from a set of previously modelled forest variables. The LiDAR-based models developed can be used to elaborate geo-referenced raster files to describe fuel characteristics. These files can be generated periodically, whenever new freely available airborne LiDAR data are released by the Spanish National Plan of Aerial Orthophotography, and can be used as inputs in fire behaviour simulation systems.

Nomographs for predicting crown fire initiation in Aleppo pine (Pinus halepensis Mill.) forests

2007 ◽  
Vol 126 (4) ◽  
pp. 555-561 ◽  
Author(s):  
A. P. Dimitrakopoulos ◽  
I. D. Mitsopoulos ◽  
D. I. Raptis
Keyword(s):  
Pinus Halepensis ◽  
Aleppo Pine ◽  
Crown Fire ◽  
Fire Initiation

Development and evaluation of a semi-physical crown fire initiation model

2006 ◽  
Vol 234 ◽  
pp. S96 ◽  
Author(s):  
Miguel G. Cruz ◽  
Bret W. Butler ◽  
Martin E. Alexander ◽  
D.X. Viegas
Keyword(s):  
Crown Fire ◽  
Fire Initiation

scholarly journals Estimación de la distribución vertical de combustibles finos del dosel de copas en masas de Pinus sylvestris empleando datos LiDAR de baja densidad

2019 ◽  
pp. 1 ◽  
Author(s):  
L. A. Fidalgo-González ◽  
S. Arellano-Pérez ◽  
J. G. Álvarez-González ◽  
F. Castedo-Dorado ◽  
A. D. Ruiz-González ◽  
...  
Keyword(s):  
Vertical Distribution ◽  
Fire Hazard ◽  
National Forest Inventory ◽  
Fuel Load ◽  
Crown Fire ◽  
Cross Model ◽  
Canopy Fuels ◽  
Structural Variables ◽  
Fire Initiation ◽  
Using Data

<p>Canopy fuel load, canopy bulk density and canopy base height are structural variables used to predict crown fire initiation and spread. Direct measurement of these variables is not functional, and they are usually estimated indirectly by modelling. Advances in fire behaviour modelling require accurate and landscape scale estimates of the complete vertical distribution of canopy fuels. The goal of the present study is to model the vertical profile of available canopy fuels in Scots pine stands by using data from the Spanish national forest inventory and low-density LiDAR data (0.5 first returns  m<sup>–2</sup>) provided by Spanish PNOA project (Plan Nacional de Ortofotografía Aérea). In a first step, the vertical distribution of the canopy fuel load was modelled using the Weibull probability density function. In a second step, a system of models was fitted to relate the canopy variables to Lidar-derived metrics. Models were fitted simultaneously to compensate the effects of the inherent cross-model correlation between errors. Heteroscedasticity was also analyzed, but correction in the fitting process was not necessary. The estimated canopy fuel load profiles from LiDAR-derived metrics explained 41% of the variation in canopy fuel load in the analysed plots. The proposed models can be used to assess the effectiveness of different forest management alternatives for reducing crown fire hazard.</p>

Experimental and numerical modeling of crown fire initiation

2006 ◽  
Vol 234 ◽  
pp. S97
Author(s):  
Watcharapong Tachajapong ◽  
Xiangyang Zhou ◽  
Shankar Mahalingam ◽  
David Weise
Keyword(s):  
Numerical Modeling ◽  
Crown Fire ◽  
Fire Initiation ◽  
Experimental And Numerical Modeling
Sign in / Sign up

Export Citation Format

Share Document