scholarly journals Modeling, Simulation, Hardware Implementation of a Novel Variable Pitch Control for H-Type Vertical Axis Wind Turbine

2015 ◽  
Vol 66 (5) ◽  
pp. 264-269 ◽  
Author(s):  
Liqun Liu ◽  
Chunxia Liu ◽  
Xuyang Zheng
Keyword(s):  
Wind Turbine ◽  
Control Method ◽  
Vertical Axis ◽  
Utilization Efficiency ◽  
Vertical Axis Wind Turbine ◽  
Variable Pitch ◽  
Pitch Control ◽  
Start Up ◽  
Variable Pitch Control ◽  
Fixed Pitch

Abstract It is well known that the fixed pitch vertical axis wind turbine (FP-VAWT) has some disadvantages such as the low start-up torque and inefficient output efficiency. In this paper, the variable pitch vertical axis wind turbine (VP-VAWT) is analyzed to improve the output characteristics of FP-VAWT by discussing the force of the six blade H type vertical axis wind turbine (VAWT) under the stationary and rotating conditions using built the H-type VAWT model. First, the force of single blade at variable pitch and fixed pitch is analyzed, respectively. Then, the resultant force of six blades at different pitch is gained. Finally, a variable pitch control method based on a six blade H type VP-VAWT is proposed, moreover, the technical analysis and simulation results validate that the variable pitch method can improve the start-up torque of VAWT, and increase the utilization efficiency of wind energy, and reduce the blade oscillation, as comparable with that of FP-VAWT.

Design and Test of a Vertical-Axis Wind Turbine with Pitch Control

2012 ◽  
Vol 225 ◽  
pp. 338-343 ◽  
Author(s):  
J.J. Miau ◽  
S.Y. Liang ◽  
R.M. Yu ◽  
C.C. Hu ◽  
T.S. Leu ◽  
...  
Keyword(s):  
Wind Turbine ◽  
Vertical Axis ◽  
Aerodynamic Characteristics ◽  
Vertical Axis Wind Turbine ◽  
Variable Pitch ◽  
Pitch Control ◽  
Remarkable Improvement ◽  
The One ◽  
Variable Pitch Control ◽  
Starting Torque

The concept of pitch control has been implemented in the design of a small vertical-axis wind turbine. Benefits gained can be shown by the experimental and numerical results presented in this paper. As found, the method of variable pitch control outperforms the one of fixed pitch control. The present results show that the former can make remarkable improvement on the starting torque as well as the aerodynamic characteristics at low tip speed ratios.

Application of Variable Blade Pitch Control on Improving the Performance of Vertical Axis Wind Turbine

2012 ◽  
Vol 229-231 ◽  
pp. 2339-2342
Author(s):  
J.C. Cheng ◽  
S.J Su ◽  
J.J Miau
Keyword(s):  
Wind Turbine ◽  
Vertical Axis ◽  
Aerodynamic Characteristics ◽  
Speed Ratio ◽  
Vertical Axis Wind Turbine ◽  
Energy Capture ◽  
Pitch Control ◽  
Tip Speed Ratio ◽  
Torque Coefficient ◽  
Variable Pitch Control

A three blades vertical axis wind turbine simulation is performed to study the unsteady aerodynamic characteristics with blade pitch control. Several fixed and variable blade pitch models under different tip speed ratio are adopted to improve performance of the wind turbine. Results show that an appropriate pitch control model can effectively decrease the range of negative torque regime to reduce the vibration of the wind turbine. Besides, the average torque coefficient as well as the energy capture efficiency can be also improved, especially for the lower tip speed ratio. The overall efficiency of the wind turbines in power generation will be enhanced. For the cases under the tip speed ratio between 1 and 3, the efficiency can be enhanced 243% and 486% for fixed and variable pitch control models respectively as comparing with non-pitch control cases.

Variable pitch control for vertical-axis wind turbines

2018 ◽  
Vol 42 (2) ◽  
pp. 128-135 ◽  
Author(s):  
S Horb ◽  
R Fuchs ◽  
A Immas ◽  
F Silvert ◽  
P Deglaire
Keyword(s):  
Fluid Dynamics ◽  
Computational Fluid Dynamics ◽  
Wind Turbine ◽  
Three Dimensional ◽  
Vertical Axis ◽  
Two Dimensional ◽  
Vertical Axis Wind Turbine ◽  
Horizontal Axis Wind Turbine ◽  
Variable Pitch ◽  
Pitch Control

NENUPHAR aims at developing the next generation of large-scale floating offshore vertical-axis wind turbine. To challenge the horizontal-axis wind turbine, the variable blade pitch control appears to be a promising solution. This article focuses on blade pitch law optimization and resulting power and thrust gain depending on the operational conditions. The aerodynamics resulting from the implementation of a variable blade pitch control are studied through numerical simulations, either with a three-dimensional vortex code or with two-dimensional Navier-stokes simulations (two-dimensional computational fluid dynamics). Results showed that the three-dimensional vortex code used as quasi-two-dimensional succeeded to give aerodynamic loads in very good agreement with two-dimensional computational fluid dynamics simulation results. The three-dimensional-vortex code was then used in three-dimensional configuration, highlighting that the variable pitch can enhance the vertical-axis wind turbine power coefficient ( Cp) by more than 15% in maximum power point tracking mode and decrease it by more than 75% in power limitation mode while keeping the thrust below its rated value.

EXPERIMENTAL AND NUMERICAL EVALUATION OF PERFORMANCE OF A VARIABLE PITCH VERTICAL AXIS WIND TURBINE

2021 ◽  
pp. 1-14
Author(s):  
Owaisur Rahman Shah ◽  
Azfar Jamal ◽  
Talha Irfan Khan ◽  
Usama Waleed Qazi
Keyword(s):  
Wind Turbine ◽  
Azimuthal Angle ◽  
Research Work ◽  
Vertical Axis ◽  
Experimental Results ◽  
Vertical Axis Wind Turbine ◽  
Horizontal Axis Wind Turbine ◽  
Variable Pitch ◽  
Lift And Drag ◽  
Fixed Pitch

Abstract The research work depicts the study of the comparison of a 1kW Fixed Pitch Vertical Axis Wind Turbine (VAWT) and a Variable Pitch VAWT via analytical, numerical and experimental results. Being an emerging technology, wind turbine is becoming a source of attraction for the researchers. The VAWT in comparison to the Horizontal Axis Wind Turbine (HAWT), has shown numerous benefits. The fundamental purpose of this work is to maximize the output power and output torque of the wind turbine. For achieving an improved output, a novel and unique mechanism, termed as pitching mechanism, is employed that follows the variable pitch concept. The mathematical modelling was done for the straight blade variable pitch VAWT as well as for the fixed rotor. The four bar mechanism was developed, to execute the variable pitch mechanism, and implemented in the form of the CAD model. A scaled down 3D Model of the rotor was manufactured using 3D printing technique. The aerodynamic forces such as lift and drag were measured upon the rotor as per the testing on the rotor in the wind tunnel. CFD simulations were run for the fixed pitch as well as the variable pitch rotor. The transient analysis was performed for the azimuthal angle ranging from 0 to 360 degrees and for a pitch angle varying from +25 to-25 degrees in ANSYS software. The comparative study was undertaken, keeping in view the analytical, simulation and experimental results. A worthy agreement was observed between analytical, software and experimental results and a promising increase in power and torque was observed due the introduction of the variable pitch mechanism. The power produced by the variable pitch design showed a significant increase in the power production as compared to the fixed pitch design. The numerical and experimental values of cp for the variable pitch design were quite comparable.

scholarly journals Simplified nonlinear rotational inertia model for the simulation and analysis of the characteristics of an unconventional VAWT type wind turbine with variable pitch

2021 ◽  
pp. 11-22
Author(s):  
David Franco-Martínez ◽  
Jesús García-Barrera ◽  
Jorge Díaz-Salgado ◽  
Oliver M. Huerta-Chávez
Keyword(s):  
Wind Turbine ◽  
Vertical Axis ◽  
Rotational Inertia ◽  
Vertical Axis Wind Turbine ◽  
Aerodynamic Coefficients ◽  
Stream Tube ◽  
Variable Pitch ◽  
Output Torque ◽  
Start Up ◽  
Inertia Model

This paper shows a double multiple stream tube model coupling to a rotational inertia model. It allows the simulation and analysis of the characteristics of an unconventional vertical-axis wind turbine (VAWT) with Variable Pitch. This implementation permits to employ a stationary response of the wind turbine calculated across the main characteristics of output torque based on experimental aerodynamic coefficients and the Reynolds at each station, can be transformed into a transient response by a simplified non-linear rotational inertia dynamic model to predict the start-up, idle, stabilization and sudden stop of our device.

scholarly journals Predicted and measured performance of a vertical axis wind turbine with passive variable pitch compared to fixed pitch

2016 ◽  
Vol 41 (1) ◽  
pp. 74-90 ◽  
Author(s):  
Brian K Kirke ◽  
Benoit Paillard
Keyword(s):  
Wind Turbine ◽  
Control Mechanism ◽  
Vertical Axis ◽  
Dynamics Simulation ◽  
Maximum Efficiency ◽  
Vertical Axis Wind Turbine ◽  
Actual Performance ◽  
Variable Pitch ◽  
Starting Torque ◽  
Fixed Pitch

The performance of a 5-m diameter Darrieus vertical axis wind turbine was predicted using both a double multiple streamtube model and a two-dimensional unsteady Reynolds-averaged Navier–Stokes computational fluid dynamics simulation with constant rotational speed for a series of operational points. The actual performance was measured in both fixed and variable pitch modes. The aims were (1) to compare starting torque and peak efficiency in fixed and variable pitch modes and (2) to test an overspeed control mechanism. Starting torque was approximately three times higher in variable pitch mode and the maximum efficiency on some runs was significantly higher. The overspeed control mechanism functioned consistently as designed. Thus, variable pitch was shown to overcome two major disadvantages of normal fixed pitch vertical axis wind turbines, self-starting and overspeed control. Discrepancies between the predicted and measured results showed the importance of accurately assessing parasitic drag losses and the need for three-dimensional simulation to give reliable performance predictions.

Coupled Dynamics of a Vertical Axis Wind Turbine (VAWT) With Active Blade Pitch Control on a Semi-Submersible Floater

2018 ◽  
Author(s):  
Ebert Vlasveld ◽  
Fons Huijs ◽  
Feike Savenije ◽  
Benoît Paillard
Keyword(s):  
Wind Turbine ◽  
Wind Velocity ◽  
Vertical Axis ◽  
Power Production ◽  
Mooring Line ◽  
Vertical Axis Wind Turbine ◽  
Coupled Dynamics ◽  
Low Frequencies ◽  
Pitch Control ◽  
Thrust And Torque

A vertical axis wind turbine (VAWT) typically has a low position of the center of gravity and a large allowable tilt angle, which could allow for a relatively small floating support structure. Normally however, the drawback of large loads on the VAWT rotor during parked survival conditions limits the extent to which the floater size can be reduced. If active blade pitch control is applied to the VAWT, this drawback can be mitigated and the benefits can be fully utilized. The coupled dynamics of a 6 MW VAWT with active blade pitch control supported by a GustoMSC Tri-Floater semi-submersible floater have been simulated using coupled aero-hydro-servo-elastic software. The applied blade pitch control during power production results in a steady-state thrust curve which is more comparable to a HAWT, with the maximum thrust occurring at rated wind velocity. During power production, floater motions occur predominantly at low frequencies. These low frequency motions are caused by variations in the wind velocity and consequently the rotor thrust and torque. For the parked survival condition, it is illustrated that active blade pitch control can be used to effectively reduce dynamic load variations on the rotor and minimize floater motions and mooring line tensions.

Sign in / Sign up

Export Citation Format

Share Document