scholarly journals Concurrent validity and intra-trial reliability of a bluetooth-embedded inertial measurement unit for real-time joint range of motion

2019 ◽  
Vol 18 (3) ◽  
pp. 1-11 ◽  
Author(s):  
D. Oh ◽  
W. Lim ◽  
N. Lee
Keyword(s):  
Real Time ◽  
Concurrent Validity ◽  
Inertial Measurement Unit ◽  
Correlation Coefficients ◽  
Knee Extension ◽  
Repeated Measurements ◽  
Measurement Unit ◽  
Validity And Reliability ◽  
Inertial Measurement ◽  
Performance Ability

Abstract Along with advancements in science and technology, anthropometric measurements using electronic devices have become possible, and research is being actively conducted on this topic. Recently, devices using Bluetooth that are portable because of their small size have been developed to allow real-time measurements and recording. This study investigated the concurrent validity and intra-trial reliability of a recently developed Bluetooth-embedded inertial measurement unit. Thirty-seven healthy, young adult participants (age = 22.1±1.2 years, height = 166.8±1.6 cm, mass = 61.9±12.3 kg) were included in the study. The knee extension angles during active knee extension were measured for validity, using both the Bluetooth-embedded inertial measurement unit and the standard goniometer. Intra-trial reliability was tested for consistency during repeated measurements. The intra-class correlation coefficients value for the concurrent validity between the Bluetooth-embedded inertial measurement unit and standard goniometer was 0.991, and the values for the intra-trial reliability of the two devices were 0.973 and 0.963, respectively. Based on its high validity and reliability, the Bluetooth-embedded device may be useful for evaluating functional impairment and exercise performance ability by real-time measurements of joint ranges of motion in clinical rehabilitation or sports fields.

scholarly journals Valid and Reliable Barbell Velocity Estimation Using an Inertial Measurement Unit

2021 ◽  
Vol 18 (17) ◽  
pp. 9170
Author(s):  
Steffen Held ◽  
Ludwig Rappelt ◽  
Jan-Philip Deutsch ◽  
Lars Donath
Keyword(s):  
Inertial Measurement Unit ◽  
Intraclass Correlation ◽  
Correlation Coefficients ◽  
Velocity Estimation ◽  
Measurement Unit ◽  
Systematic Bias ◽  
Validity And Reliability ◽  
Inertial Measurement ◽  
Intraclass Correlation Coefficients ◽  
Reliability Indicators

The accurate assessment of the mean concentric barbell velocity (MCV) and its displacement are crucial aspects of resistance training. Therefore, the validity and reliability indicators of an easy-to-use inertial measurement unit (VmaxPro®) were examined. Nineteen trained males (23.1 ± 3.2 years, 1.78 ± 0.08 m, 75.8 ± 9.8 kg; Squat 1-Repetition maximum (1RM): 114.8 ± 24.5 kg) performed squats and hip thrusts (3–5 sets, 30 repetitions total, 75% 1RM) on two separate days. The MCV and displacement were simultaneously measured using VmaxPro® and a linear position transducer (Speed4Lift®). Good to excellent intraclass correlation coefficients (0.91 < ICC < 0.96) with a small systematic bias (p < 0.001; ηp2 < 0.50) for squats (0.01 ± 0.04 m·s−1) and hip thrusts (0.01 ± 0.05 m·s−1) and a low limit of agreement (LoA < 0.12 m·s−1) indicated an acceptable validity. The within- and between-day reliability of the MCV revealed good ICCs (0.55 < ICC < 0.91) and a low LoA (<0.16 m·s−1). Although the displacement revealed a systematic bias during squats (p < 0.001; ηp2 < 0.10; 3.4 ± 3.4 cm), no bias was detectable during hip thrusts (p = 0.784; ηp2 < 0.001; 0.3 ± 3.3 cm). The displacement showed moderate to good ICCs (0.43 to 0.95) but a high LoA (7.8 to 10.7 cm) for the validity and (within- and between-day) reliability of squats and hip thrusts. The VmaxPro® is considered to be a valid and reliable tool for the MCV assessment.

scholarly journals Evaluation of Validity and Reliability of Inertial Measurement Unit-Based Gait Analysis Systems

2018 ◽  
Vol 42 (6) ◽  
pp. 872-883 ◽  
Author(s):  
Young-Shin Cho ◽  
Seong-Ho Jang ◽  
Jae-Sung Cho ◽  
Mi-Jung Kim ◽  
Hyeok Dong Lee ◽  
...  
Keyword(s):  
Gait Analysis ◽  
Inertial Measurement Unit ◽  
Measurement Unit ◽  
Validity And Reliability ◽  
Inertial Measurement

scholarly journals Real-Time Gait Analysis Using a Single Head-Worn Inertial Measurement Unit

2018 ◽  
Vol 64 (2) ◽  
pp. 240-248 ◽  
Author(s):  
Tong-Hun Hwang ◽  
Julia Reh ◽  
Alfred O. Effenberg ◽  
Holger Blume
Keyword(s):  
Gait Analysis ◽  
Real Time ◽  
Inertial Measurement Unit ◽  
Measurement Unit ◽  
Inertial Measurement

scholarly journals Design, Validity, and Reliability of a New Test, Based on an Inertial Measurement Unit System, for Measuring Cervical Posture and Motor Control in Children with Cerebral Palsy

Diagnostics ◽  
2020 ◽  
Vol 10 (9) ◽  
pp. 661
Author(s):  
Cristina Carmona-Pérez ◽  
Alberto Pérez-Ruiz ◽  
Juan L. Garrido-Castro ◽  
Francisco Torres Vidal ◽  
Sandra Alcaraz-Clariana ◽  
...  
Keyword(s):  
Cerebral Palsy ◽  
Motor Control ◽  
Inertial Measurement Unit ◽  
Measurement Unit ◽  
Validity And Reliability ◽  
Inertial Measurement ◽  
Functional Measures ◽  
Flexion Extension ◽  
Children With Cerebral Palsy ◽  
Cervical Posture

Objective: The aim of this study was to design and propose a new test based on inertial measurement unit (IMU) technology, for measuring cervical posture and motor control in children with cerebral palsy (CP) and to evaluate its validity and reliability. Methods: Twenty-four individuals with CP (4–14 years) and 24 gender- and age-matched controls were evaluated with a new test based on IMU technology to identify and measure any movement in the three spatial planes while the individual is seated watching a two-minute video. An ellipse was obtained encompassing 95% of the flexion/extension and rotation movements in the sagittal and transversal planes. The protocol was repeated on two occasions separated by 3 to 5 days. Construct and concurrent validity were assessed by determining the discriminant capacity of the new test and by identifying associations between functional measures and the new test outcomes. Relative reliability was determined using the intraclass correlation coefficient (ICC) for test–retest data. Absolute reliability was obtained by the standard error of measurement (SEM) and the Minimum Detectable Change at a 90% confidence level (MDC90). Results: The discriminant capacity of the area and both dimensions of the new test was high (Area Under the Curve ≈ 0.8), and consistent multiple regression models were identified to explain functional measures with new test results and sociodemographic data. A consistent trend of ICCs higher than 0.8 was identified for CP individuals. Finally, the SEM can be considered low in both groups, although the high variability among individuals determined some high MDC90 values, mainly in the CP group. Conclusions: The new test, based on IMU data, is valid and reliable for evaluating posture and motor control in children with CP.

scholarly journals Sit-To-Stand Movement Evaluated Using an Inertial Measurement Unit Embedded in Smart Glasses—A Validation Study

Sensors ◽  
2020 ◽  
Vol 20 (18) ◽  
pp. 5019
Author(s):  
Justine Hellec ◽  
Frédéric Chorin ◽  
Andrea Castagnetti ◽  
Serge S. Colson
Keyword(s):  
Concurrent Validity ◽  
Inertial Measurement Unit ◽  
Vertical Axis ◽  
Measurement Unit ◽  
Vertical Acceleration ◽  
Optoelectronic System ◽  
Inertial Measurement ◽  
Sit To Stand ◽  
Smart Glasses ◽  
Absolute Reliability

Wearable sensors have recently been used to evaluate biomechanical parameters of everyday movements, but few have been located at the head level. This study investigated the relative and absolute reliability (intra- and inter-session) and concurrent validity of an inertial measurement unit (IMU) embedded in smart eyeglasses during sit-to-stand (STS) movements for the measurement of maximal acceleration of the head. Reliability and concurrent validity were investigated in nineteen young and healthy participants by comparing the acceleration values of the glasses’ IMU to an optoelectronic system. Sit-to-stand movements were performed in laboratory conditions using standardized tests. Participants wore the smart glasses and completed two testing sessions with STS movements performed at two speeds (slow and comfortable) under two different conditions (with and without a cervical collar). Both the vertical and anteroposterior acceleration values were collected and analyzed. The use of the cervical collar did not significantly influence the results obtained. The relative reliability intra- and inter-session was good to excellent (i.e., intraclass correlation coefficients were between 0.78 and 0.91) and excellent absolute reliability (i.e., standard error of the measurement lower than 10% of the average test or retest value) was observed for the glasses, especially for the vertical axis. Whatever the testing sessions in all conditions, significant correlations (p < 0.001) were found for the acceleration values recorded either in the vertical axis and in the anteroposterior axis between the glasses and the optoelectronic system. Concurrent validity between the glasses and the optoelectronic system was observed. Our observations indicate that the IMU embedded in smart glasses is accurate to measure vertical acceleration during STS movements. Further studies should investigate the use of these smart glasses to assess the STS movement in unstandardized settings (i.e., clinical and/or home) and to report vertical acceleration values in an elderly population of fallers and non-fallers.

Validity of inertial measurement unit–based knee flexion strength-power test

2019 ◽  
Vol 233 (3) ◽  
pp. 443-449
Author(s):  
Ryu Nagahara ◽  
Mai Kameda ◽  
Jonathon Neville
Keyword(s):  
Knee Flexion ◽  
Inertial Measurement Unit ◽  
Correlation Coefficients ◽  
Measurement Unit ◽  
Mean Power ◽  
Inertial Measurement ◽  
Power Test ◽  
Angular Impulse ◽  
Flexion Strength ◽  
Positive Work

This study aimed to examine the concurrent validity of inertial measurement unit–based knee flexion strength-power test variables. Ten physically active males performed a knee flexion strength-power test, consisting of serial right knee flexion-extension motions. Two trials were performed, each at 50%, 75% and 100% effort. Lower-extremity motion during the trial was recorded using a motion capture system and an inertial measurement unit. For inertial measurement unit data, the measured length of each lower-extremity segment was used to estimate segment endpoint coordinates. Knee flexion kinetic variables were then computed using inverse dynamics analysis for both systems. The inertial measurement unit provided comparable values with the motion capture system for angular impulse, mean moment, positive work and mean power (−0.8%, 1.0%, −0.9%, and 1.5%, respectively). Moreover, intraclass correlation coefficients and correlation coefficients for angular impulse, mean moment, positive work and mean power of knee flexion were acceptably high (ICC or r = 0.903–0.970). For positive mean power, however, a Bland–Altman plot showed heteroscedasticity. For knee flexion negative work and mean power, the inertial measurement unit clearly showed an overestimation of the values (32.5% and 23.5%, respectively). Moreover, the intraclass correlation coefficients and correlation coefficients were not acceptably high for knee flexion negative work and mean power (ICC or r = 0.541–0.899). These results indicate that the angular impulse, mean moment and positive work can be measured accurately and validly using an inertial measurement unit for knee flexion strength-power test variables. Given its simplicity, the suggested inertial measurement unit–based knee flexion strength-power test would improve on-the-field physical fitness evaluation.

Development and Implementation of a Novel Digital Shot Sensor System

2013 ◽  
Vol 364 ◽  
pp. 228-232
Author(s):  
Wei Tian Wang ◽  
Quan Jun Song ◽  
Yu Man Nie ◽  
Bu Yun Wang ◽  
Hong Yu Ren ◽  
...  
Keyword(s):  
Real Time ◽  
Information Acquisition ◽  
Inertial Measurement Unit ◽  
Degrees Of Freedom ◽  
Sensor System ◽  
Measurement Unit ◽  
Inertial Measurement ◽  
Kinetic Information ◽  
Shot Put

Kinetic information acquisition of shot throwing is significant for the train of shot put athletes. This paper presents a novel sensor system based on a 9 degrees of freedom inertial measurement unit, which provides attitude information of shot throwing in real time. The sensor system is designed with modularized structure and installed in the digital shot which has almost the same size and weight as the standard shot for females. A multi-target and multi-parameter information acquisition platform is constructed to acquire kinematics information. With the help of the sensor system, the coaches can combine attitude information with kinematics data to analyze the shot throwing movements.

Sign in / Sign up

Export Citation Format

Share Document