On the size dependence of surface tension in the temperature range from melting point to critical point

Open Physics ◽  
2005 ◽  
Vol 3 (2) ◽  
Author(s):  
Nickolay Sdobnyakov ◽  
Vladimir Samsonov
Keyword(s):  
Surface Tension ◽  
Critical Point ◽  
Size Dependence ◽  
Excess Free Energy ◽  
Thermodynamic Perturbation Theory ◽  
Effective Surface ◽  
Temperature Range ◽  
Lennard Jones ◽  
Dividing Surface ◽  
First Time

AbstractThe problem of size dependence of surface tension was investigated in view of a more general problem of the applicability of Gibbs’ thermodynamics to nanosized objects. For the first time, the effective surface tension (coinciding with the specific excess free energy for an equimolecular dividing surface) was calculated within a wide temperature range, from the melting temperature to the critical point, using the thermodynamic perturbation theory. Calculations were carried out for Lennard-Jones and metallic nanosized droplets. It was found that the effective surface tension decreases both, with temperature and particle size.

On applicability of Gibbs thermodynamics to nanoparticles

Open Physics ◽  
2003 ◽  
Vol 1 (3) ◽  
Author(s):  
V. Samsonov ◽  
A. Bazulev ◽  
N. Sdobnyakov
Keyword(s):  
Surface Tension ◽  
Free Energy ◽  
Excess Free Energy ◽  
Particle Radius ◽  
Phase Method ◽  
Surface Phase ◽  
Effective Surface

AbstractThe problem of applicability of thermodynamics to small objects has been investigated. It is shown that the Gibbs surface phase method may be extended to nanoparticles if the effective surface tension (the specific excess free energy) is interpreted as a function of the particle radius.

The Critical Point Drying Method Applied to Scanning Electron Microscopy of L-929 Cells

1970 ◽  
Vol 28 ◽  
pp. 278-279
Author(s):  
Charles TurnbiLL ◽  
Delbert E. Philpott
Keyword(s):  
Electron Microscopy ◽  
Carbon Dioxide ◽  
Surface Tension ◽  
Critical Point ◽  
Freeze Drying ◽  
Attractive Alternative ◽  
Crystal Formation ◽  
Critical Point Drying ◽  
Time Required ◽  
Scanning Electron

The advent of the scanning electron microscope (SCEM) has renewed interest in preparing specimens by avoiding the forces of surface tension. The present method of freeze drying by Boyde and Barger (1969) and Small and Marszalek (1969) does prevent surface tension but ice crystal formation and time required for pumping out the specimen to dryness has discouraged us. We believe an attractive alternative to freeze drying is the critical point method originated by Anderson (1951; for electron microscopy. He avoided surface tension effects during drying by first exchanging the specimen water with alcohol, amy L acetate and then with carbon dioxide. He then selected a specific temperature (36.5°C) and pressure (72 Atm.) at which carbon dioxide would pass from the liquid to the gaseous phase without the effect of surface tension This combination of temperature and, pressure is known as the "critical point" of the Liquid.

Multicanonical Molecular Dynamics Simulation Study of the Liquid-Solid and Solid-Solid Transitions in Lennard-Jones Clusters

2011 ◽  
Author(s):  
Toshihiro Kaneko ◽  
Kenji Yasuoka ◽  
Ayori Mitsutake ◽  
Xiao Cheng Zeng
Keyword(s):  
Molecular Dynamics ◽  
Heat Capacity ◽  
Transition Temperature ◽  
Peak Position ◽  
Temperature Curve ◽  
Dynamics Simulation ◽  
Lennard Jones ◽  
Dynamics Simulations ◽  
First Time ◽  
Good Agreement

Multicanonical molecular dynamics simulations are applied, for the first time, to study the liquid-solid and solid-solid transitions in Lennard-Jones (LJ) clusters. The transition temperatures are estimated based on the peak position in the heat capacity versus temperature curve. For LJ31, LJ58 and LJ98, our results on the solid-solid transition temperature are in good agreement with previous ones. For LJ309, the predicted liquid-solid transition temperature is also in agreement with previous result.

Dynamic Viscosity of Compressed Water to 10 Kilobar and Steam to 1500°C

1969 ◽  
Vol 11 (2) ◽  
pp. 189-205 ◽  
Author(s):  
E. A. Bruges ◽  
M. R. Gibson
Keyword(s):  
Gaseous Phase ◽  
Dynamic Viscosity ◽  
Low Temperatures ◽  
Pressure Range ◽  
Low Pressure ◽  
Temperature Range ◽  
Inversion Temperature ◽  
Pressure Steam ◽  
Correlating Equations ◽  
First Time

Equations specifying the dynamic viscosity of compressed water and steam are presented. In the temperature range 0-100cC the location of the inversion locus (mu) is defined for the first time with some precision. The low pressure steam results are re-correlated and a higher inversion temperature is indicated than that previously accepted. From 100 to 600°C values of viscosity are derived up to 3·5 kilobar and between 600 and 1500°C up to 1 kilobar. All the original observations in the gaseous phase have been corrected to a consistent set of densities and deviation plots for all the new correlations are given. Although the equations give values within the tolerances of the International Skeleton Table it is clear that the range and tolerances of the latter could with some advantage be revised to give twice the existing temperature range and over 10 times the existing pressure range at low temperatures. A list of the observations used and their deviations from the correlating equations is available as a separate publication.

scholarly journals Isolation and characterization of a new cold-active protease from psychrotrophic bacteria of Western Himalayan glacial soil

2021 ◽  
Vol 11 (1) ◽  
Author(s):  
Saleem Farooq ◽  
Ruqeya Nazir ◽  
Shabir Ahmad Ganai ◽  
Bashir Ahmad Ganai
Keyword(s):  
Specific Activity ◽  
Temperature Range ◽  
Psychrotrophic Bacteria ◽  
Isolation And Characterization ◽  
Cold Active ◽  
Active Protease ◽  
Quantitative Screening ◽  
First Time ◽  
Low K

AbstractAs an approach to the exploration of cold-active enzymes, in this study, we isolated a cold-active protease produced by psychrotrophic bacteria from glacial soils of Thajwas Glacier, Himalayas. The isolated strain BO1, identified as Bacillus pumilus, grew well within a temperature range of 4–30 °C. After its qualitative and quantitative screening, the cold-active protease (Apr-BO1) was purified. The Apr-BO1 had a molecular mass of 38 kDa and showed maximum (37.02 U/mg) specific activity at 20 °C, with casein as substrate. It was stable and active between the temperature range of 5–35 °C and pH 6.0–12.0, with an optimum temperature of 20 °C at pH 9.0. The Apr-BO1 had low Km value of 1.0 mg/ml and Vmax 10.0 µmol/ml/min. Moreover, it displayed better tolerance to organic solvents, surfactants, metal ions and reducing agents than most alkaline proteases. The results exhibited that it effectively removed the stains even in a cold wash and could be considered a decent detergent additive. Furthermore, through protein modelling, the structure of this protease was generated from template, subtilisin E of Bacillus subtilis (PDB ID: 3WHI), and different methods checked its quality. For the first time, this study reported the protein sequence for psychrotrophic Apr-BO1 and brought forth its novelty among other cold-active proteases.

scholarly journals Interactions between an Associative Amphiphilic Block Polyelectrolyte and Surfactants in Water: Effect of Charge Type on Solution Properties and Aggregation

Polymers ◽  
2021 ◽  
Vol 13 (11) ◽  
pp. 1729
Author(s):  
Patrizio Raffa
Keyword(s):  
Surface Tension ◽  
Self Assembly ◽  
Interaction Model ◽  
Industrial Applications ◽  
Molecular Organization ◽  
Different Types ◽  
Solution Rheology ◽  
Interesting Class ◽  
First Time

The study of interactions between polyelectrolytes (PE) and surfactants is of great interest for both fundamental and applied research. These mixtures can represent, for example, models of self-assembly and molecular organization in biological systems, but they are also relevant in industrial applications. Amphiphilic block polyelectrolytes represent an interesting class of PE, but their interactions with surfactants have not been extensively explored so far, most studies being restricted to non-associating PE. In this work, interactions between an anionic amphiphilic triblock polyelectrolyte and different types of surfactants bearing respectively negative, positive and no charge, are investigated via surface tension and solution rheology measurements for the first time. It is evidenced that the surfactants have different effects on viscosity and surface tension, depending on their charge type. Micellization of the surfactant is affected by the presence of the polymer in all cases; shear viscosity of polymer solutions decreases in presence of the same charge or nonionic surfactants, while the opposite charge surfactant causes precipitation. This study highlights the importance of the charge type, and the role of the associating hydrophobic block in the PE structure, on the solution behavior of the mixtures. Moreover, a possible interaction model is proposed, based on the obtained data.

Raman spectra and lattice dynamics of the α phases of nitrogen and carbon monoxide crystals

1970 ◽  
Vol 48 (19) ◽  
pp. 2265-2271 ◽  
Author(s):  
A. Anderson ◽  
T. S. Sun ◽  
M. C. A. Donkersloot
Keyword(s):  
Carbon Monoxide ◽  
Raman Spectra ◽  
Lattice Dynamics ◽  
Jones Potential ◽  
Lennard Jones ◽  
Neon Laser ◽  
Helium Neon Laser ◽  
First Time ◽  
Helium Neon ◽  
Argon Ion

The Raman spectra of polycrystalline α-nitrogen and α-carbon monoxide have been recorded at 18 °K, using argon–ion and helium–neon laser excitation. Previously undetected peaks at 60 cm−1 for N2 and 90.5 cm−1 for CO are assigned as librational modes, and splitting of the stretching mode in nitrogen is observed for the first time. Spectral features in both the intramolecular and lattice regions are assigned in accordance with accepted crystal structures, and their frequencies compared with those obtained from calculations based on a spherical Lennard–Jones potential and quadrupole–quadrupole interactions between the molecules.

Sign in / Sign up

Export Citation Format

Share Document