Experimental Investigations of Normal Deformation Characteristics of Foundation Chocks Used in the Seating of Heavy Machines and Qevices Part II. Experimental Investigations of a Chock Cast of EPY Resin

2014 ◽  
Vol 38 (2) ◽  
Author(s):  
Paweł Grudziński ◽  
Konrad Konowalski
Keyword(s):  
Experimental Investigations ◽  
Deformation Characteristics ◽  
Normal Deformation

scholarly journals Investigations into Deformation Characteristics during Open-Die Forging of SiCp Reinforced Aluminium Metal Matrix Composites

2013 ◽  
Vol 2013 ◽  
pp. 1-14 ◽  
Author(s):  
Deep Verma ◽  
P. Chandrasekhar ◽  
S. Singh ◽  
S. Kar
Keyword(s):  
Finite Element ◽  
Metal Matrix Composites ◽  
Metal Matrix ◽  
Experimental Investigations ◽  
Matrix Composites ◽  
Deformation Characteristics ◽  
Die Forging ◽  
Open Die Forging ◽  
Silicon Carbide Particulate ◽  
Aluminium Metal

The deformation characteristics during open-die forging of silicon carbide particulate reinforced aluminium metal matrix composites (SiCp AMC) at cold conditions are investigated. The material was fabricated by liquid stir casting method in which preheated SiC particles were mixed with molten LM6 aluminium casting alloy and casted in the silicon mould. Finally, preforms obtained were machined in required dimensions. Two separate cases of deformation, that is, open-die forging of solid disc and solid rectangular preforms, were considered. Both upper bound theoretical analysis and experimental investigations were performed followed by finite element simulation using DEFORM, considering composite interfacial friction law, barreling of preform vertical sides, and inertia effects, that is, effect of die velocity on various deformation characteristics like effective stress, strain, strain rate, forging load, energy dissipations, and height reduction. Results have been presented graphically and critically investigated to evaluate the concurrence among theoretical, experimental, and finite element based computational findings.

Transmission Electron Microscopic Observations of Al3Li and Al3Ti Precipitation in A Rapidly Solidified Al-3Li-0.2Ti ALLOY

1980 ◽  
Vol 38 ◽  
pp. 336-337
Author(s):  
J. E. O’Neal ◽  
K. K. Sankaran ◽  
S. M. L. Sastry
Keyword(s):  
Rapid Solidification ◽  
Metallic Substrate ◽  
Deformation Characteristics ◽  
Phase Decomposition ◽  
Electron Microscopic ◽  
Transmission Electron ◽  
Supersaturated Solid Solutions ◽  
Transmission Electron Microscopic ◽  
Rapidly Solidified ◽  
Microstructural Homogeneity

Rapid solidification of a molten, multicomponent alloy against a metallic substrate promotes greater microstructural homogeneity and greater solid solubility of alloying elements than can be achieved by slower-cooling casting methods. The supersaturated solid solutions produced by rapid solidification can be subsequently annealed to precipitate, by controlled phase decomposition, uniform 10-100 nm precipitates or dispersoids. TEM studies were made of the precipitation of metastable Al3Li(δ’) and equilibrium AL3H phases and the deformation characteristics of a rapidly solidified Al-3Li-0.2Ti alloy.

Experimental investigations of the use of cartilage in tympanic membrane reconstruction

2000 ◽  
Vol 21 (3) ◽  
pp. 322-328 ◽  
Author(s):  
T ZAHNERT ◽  
K HUTTENBRINK ◽  
D MURBE ◽  
M BORNITZ
Keyword(s):  
Tympanic Membrane ◽  
Experimental Investigations

EXPERIMENTAL INVESTIGATIONS OF THE QUANTUM PHOTOVOLTAIC EFFECT IN InAs-GaSb SEMICONDUCTOR SUPERLATTICES

1987 ◽  
Vol 48 (C5) ◽  
pp. C5-183-C5-186
Author(s):  
J. BLEUSE ◽  
P. VOISIN ◽  
M. VOOS ◽  
L. L. CHANG ◽  
L. ESAKI
Keyword(s):  
Photovoltaic Effect ◽  
Experimental Investigations ◽  
Semiconductor Superlattices

Evaluation of the accuracy of reconstruction of the electrophysical and geometric parameters of multilayer dielectric coatings by the multi-frequency radio wave method of a slow surface electromagnetic waves

2020 ◽  
pp. 51-58
Author(s):  
Aleksandr I. Kazmin ◽  
Pavel A. Fedjunin
Keyword(s):  
Radio Wave ◽  
Noise Level ◽  
Electromagnetic Waves ◽  
Dielectric Materials ◽  
Geometric Parameters ◽  
Experimental Investigations ◽  
Wave Method ◽  
Dielectric Coatings ◽  
Surface Electromagnetic Waves ◽  
Multilayer Dielectric

One of the most important diagnostic problems multilayer dielectric materials and coatings is the development of methods for quantitative interpretation of the checkout results their electrophysical and geometric parameters. The results of a study of the potential informativeness of the multi-frequency radio wave method of surface electromagnetic waves during reconstruction of the electrophysical and geometric parameters of multilayer dielectric coatings are presented. The simulation model is presented that makes it possible to evaluate of the accuracy of reconstruction of the electrophysical and geometric parameters of multilayer dielectric coatings. The model takes into account the values of the electrophysical and geometric parameters of the coating, the noise level in the measurement data and the measurement bandwidth. The results of simulation and experimental investigations of reconstruction of the structure of relative permittivitties and thicknesses of single-layer and double-layer dielectric coatings with different thicknesses, with different values of the standard deviation (RMS) of the noise level in the measured attenuation coefficients of the surface slow electromagnetic wave are presented. Coatings based on the following materials were investigated: polymethyl methacrylate, F-4D PTFE, RO3010. The accuracy of reconstruction of the electrophysical parameters of the layers decreases with an increase in the number of evaluated parameters and an increase in the noise level. The accuracy of the estimates of the electrophysical parameters of the layers also decreases with a decrease in their relative permittivity and thickness. The results of experimental studies confirm the adequacy of the developed simulation model. The presented model allows for a specific measuring complex that implements the multi-frequency radio wave method of surface electromagnetic waves, to quantify the potential possibilities for the accuracy of reconstruction of the electrophysical and geometric parameters of multilayer dielectric materials and coatings. Experimental investigations and simulation results of a multilayer dielectric coating demonstrated the theoretical capabilities gained relative error permittivity and thickness of the individual layers with relative error not greater than 10 %, with a measurement bandwidth of 1 GHz and RMS of noise level 0,003–0,004.

Sign in / Sign up

Export Citation Format

Share Document