scholarly journals Inoculation of Austenite Primary Grains in Cast Iron

2014 ◽  
Vol 14 (4) ◽  
pp. 45-48 ◽  
Author(s):  
D. Kopyciński ◽  
E. Guzik ◽  
A. Szczęsny ◽  
J. Dorula ◽  
D. Siekaniec ◽  
...  
Keyword(s):  
Mechanical Properties ◽  
Tensile Strength ◽  
Cast Iron ◽  
Iron Powder ◽  
Strength Properties ◽  
Flake Graphite ◽  
Primary Austenite ◽  
Commercial Inoculant ◽  
Austenite Grains ◽  
The Impact

Abstract The modification is a widespread method of improving the strength properties of cast iron. The impact in terms of increasing amounts of eutectic grains has been thoroughly studied while the issue of the impact on the mechanical properties of primary austenite grains has not been studied in depth yet. The paper presents the study of both aspects. The methodology was to conduct the melting cast iron with flake graphite, then modifying the alloy by two sets of modifiers: the commercial modifier, and a mixture of iron powder with a commercial inoculant. The DAAS test was carried out to identify the primary austenite grains. The degree of supercooling was determined and the UTS test was performed as well. Additionally carried out the metallographic specimen allowing for counting grains. It can be concluded that the introduction of the iron powder significantly improved the number of austenite primary grains which resulted in an increase in tensile strength UTS.

Influence of Iron Powder Addition on the Number of Primary Austenite Grains and Tensile Strength of Inoculated Cast Iron

2014 ◽  
Vol 790-791 ◽  
pp. 59-64 ◽  
Author(s):  
Dariusz Kopyciński ◽  
Edward Guzik ◽  
Andrzej Szczęsny ◽  
Józef Dorula
Keyword(s):  
Mechanical Properties ◽  
Cast Iron ◽  
Iron Powder ◽  
Face Centered Cubic ◽  
Iron Particles ◽  
Primary Austenite ◽  
Powder Addition ◽  
Austenite Grains ◽  
Face Centered ◽  
Inoculation Treatment

The study proves that by introducing the iron powder to low-sulphur cast iron still before the inoculation carried out with a conventional graphitising inoculant, the mechanical properties similar to those obtained during the inoculation treatment carried out on cast iron with the recommended high sulphur content are achieved. The said operation increases the number of crystallisation nuclei for of the primary austenite dendrites. In this case, the iron particles act as substrates for the nucleation of primary austenite due to a similar crystallographic behaviour of the regular face centered cubic lattice The more numerous are the dendrites of primary austenite, the less free space is available in the interdendritic spaces for the formation of graphite eutectic grains, which makes the mechanical properties higher.

scholarly journals The Influence of Undercooling DT on the Structure and Tensile Strength of Grey Cast Iron

Materials ◽  
2021 ◽  
Vol 14 (21) ◽  
pp. 6682
Author(s):  
Józef Dorula ◽  
Dariusz Kopyciński ◽  
Edward Guzik ◽  
Andrzej Szczęsny ◽  
Daniel Gurgul
Keyword(s):  
Mechanical Properties ◽  
Tensile Strength ◽  
Cast Iron ◽  
Great Influence ◽  
Small Mass ◽  
Grey Cast Iron ◽  
Primary Austenite ◽  
Grey Cast ◽  
Austenite Grains ◽  
Mutual Relations

Inoculation of cast iron has become a commonly used metallurgical process, which is carried out in a foundry in order to improve the mechanical properties of utility alloys. It consists in changing the physicochemical state of the melted alloy. This change is caused by the introduction of cast iron with a low ability to nucleate graphite, shortly before pouring a small mass of the substance—an inoculant that increases the number of active nuclei. It is also justified that the literature often connects an increase in the tensile strength UTS of the inoculated grey cast iron, with changes in the characteristics of the particles of graphite. However, in strongly hypoeutectic cast iron, in which a large number of primary austenite grains crystallize, the interdendritic distribution of graphite is usually the result. It also follows that the nature of the graphite precipitates is determined by the mutual relations between the interfacial distances in eutectic grains and the interdendritic distances in the grains of primary austenite occurring in the Fe–C alloys. The article presents the influence of the inoculant on the characteristics of the precipitation of primary austenite grains in relation to the sulphur content in grey cast iron with flake graphite. The study also showed that primary grains in grey cast iron have a great influence on mechanical properties, such as the tensile strength UTS. In this case, the key is to know the value of the degree of undercooling DT. The type of inoculant used affects the DT value. The study related the number of N primary austenite grains with the degree of undercooling DT and the tensile strength UTS with the number of primary austenite N grains.

Effect of Magnesium on the Strength, Stiffness and Toughness of Nodular Cast Iron

2020 ◽  
Vol 991 ◽  
pp. 17-23
Author(s):  
Agung Setyo Darmawan ◽  
Pramuko Ilmu Purboputro ◽  
Agus Yulianto ◽  
Agus Dwi Anggono ◽  
Wijianto ◽  
...  
Keyword(s):  
Mechanical Properties ◽  
Tensile Strength ◽  
Cast Iron ◽  
Yield Strength ◽  
Tensile Test ◽  
Impact Test ◽  
Nodular Cast Iron ◽  
Ferrite Matrix ◽  
Strength And Stiffness ◽  
The Impact

Nodular cast iron is a type of cast iron with spheroid graphite surrounded by ferrite matrix and / or pearlite. The size of the graphite and its matrix affects the mechanical properties of the cast iron. This research was conducted to investigate the effect of Magnesium composition on strength, stiffness and toughness of nodular cast iron. Magnesium addition is performed by adding FeSiMg alloys. After that, the composition of magnesium was investigated by using spectrometry. Then tensile test was conducted to obtain the yield strength, tensile strength and modulus of elasticity. Further, impact test was performed to determine the impact energy needed to break the material. The result showed an increase of yield strength, tensile strength and stiffness and a decrease of toughness.

scholarly journals Effect of Mechanical Vibration on Microstructure and Mechanical Properties of Gray Cast Iron in Lost Foam Casting

2021 ◽  
Vol 2021 ◽  
pp. 1-8
Author(s):  
Kai Qiu ◽  
Bota Xiao
Keyword(s):  
Mechanical Properties ◽  
Tensile Strength ◽  
Cast Iron ◽  
Gray Cast Iron ◽  
Mechanical Vibration ◽  
Gray Cast ◽  
Lost Foam Casting ◽  
Flake Graphite ◽  
Microstructure And Properties ◽  
Lost Foam

In order to reveal the effect of vibration solidification on microstructure and properties of gray cast iron in lost foam casting, Y-shaped HT100 gray cast iron was prepared by vibration lost foam casting, and the effect of amplitude on the microstructure and properties of gray cast iron was studied. The results showed that, with the increase in amplitude, the short and thin A-type flake graphite increases, and the austenite structure transforms from columnar to cellular. The hardness, tensile strength, and elongation of gray cast iron first increase and then decrease with the increase in amplitude. The appropriate amplitude in the process of Y-shaped HT100 gray cast iron by lost foam casting is 2 mm, while the tensile strength and elongation of gray cast iron are the highest, with the values of 147.51 MPa and 1.17%, respectively. The change of mechanical properties of gray cast iron is mainly determined by the morphology and distribution of austenite in gray cast iron and A-type flake graphite.

Effect of combined drink cans and steel fibers on the impact resistance and mechanical properties of concrete

2020 ◽  
Vol 14 (2) ◽  
pp. 6734-6742
Author(s):  
A. Syamsir ◽  
S. M. Mubin ◽  
N. M. Nor ◽  
V. Anggraini ◽  
S. Nagappan ◽  
...  
Keyword(s):  
Mechanical Properties ◽  
Tensile Strength ◽  
Compressive Strength ◽  
Reinforced Concrete ◽  
Impact Resistance ◽  
Fiber Reinforced Concrete ◽  
Steel Fibers ◽  
Fiber Reinforced ◽  
Indirect Tensile ◽  
The Impact

This study investigated the combine effect of 0.2 % drink cans and steel fibers with volume fractions of 0%, 0.5%, 1%, 1.5%, 2%, 2.5% and 3% to the mechanical properties and impact resistance of concrete. Hooked-end steel fiber with 30 mm and 0.75 mm length and diameter, respectively was selected for this study.  The drinks cans fiber were twisted manually in order to increase friction between fiber and concrete. The results of the experiment showed that the combination of steel fibers and drink cans fibers improved the strength performance of concrete, especially the compressive strength, flexural strength and indirect tensile strength. The results of the experiment showed that the combination of steel fibers and drink cans fibers improved the compressive strength, flexural strength and indirect tensile strength by 2.3, 7, and 2 times as compare to batch 1, respectively. Moreover, the impact resistance of fiber reinforced concrete has increase by 7 times as compared to non-fiber concretes. Moreover, the impact resistance of fiber reinforced concrete consistently gave better results as compared to non-fiber concretes. The fiber reinforced concrete turned more ductile as the dosage of fibers was increased and ductility started to decrease slightly after optimum fiber dosage was reached. It was found that concrete with combination of 2% steel and 0.2% drink cans fibers showed the highest compressive, split tensile, flexural as well as impact strength.    

scholarly journals Evaluation of the Impact of Organic Fillers on Selected Properties of Organosilicon Polymer

Polymers ◽  
2021 ◽  
Vol 13 (7) ◽  
pp. 1103
Author(s):  
Sara Sarraj ◽  
Małgorzata Szymiczek ◽  
Tomasz Machoczek ◽  
Maciej Mrówka
Keyword(s):  
Tensile Strength ◽  
Natural Fiber ◽  
Accelerated Aging ◽  
Strength Properties ◽  
Visual Observation ◽  
Walnut Shell ◽  
Pistachio Shell ◽  
Thermoplastic Matrix ◽  
Static Tensile ◽  
The Impact

Eco-friendly composites are proposed to substitute commonly available polymers. Currently, wood–plastic composites and natural fiber-reinforced composites are gaining growing recognition in the industry, being mostly on the thermoplastic matrix. However, little data are available about the possibility of producing biocomposites on a silicone matrix. This study focused on assessing selected organic fillers’ impact (ground coffee waste (GCW), walnut shell (WS), brewers’ spent grains (BSG), pistachio shell (PS), and chestnut (CH)) on the physicochemical and mechanical properties of silicone-based materials. Density, hardness, rebound resilience, and static tensile strength of the obtained composites were tested, as well as the effect of accelerated aging under artificial seawater conditions. The results revealed changes in the material’s properties (minimal density changes, hardness variation, overall decreasing resilience, and decreased tensile strength properties). The aging test revealed certain bioactivities of the obtained composites. The degree of material degradation was assessed on the basis of the strength characteristics and visual observation. The investigation carried out indicated the impact of the filler’s type, chemical composition, and grain size on the obtained materials’ properties and shed light on the possibility of acquiring ecological silicone-based materials.

scholarly journals Damage Evolution of Granodiorite after Heating and Cooling Treatments

Minerals ◽  
2021 ◽  
Vol 11 (7) ◽  
pp. 779
Author(s):  
Mohamed Gomah ◽  
Guichen Li ◽  
Salah Bader ◽  
Mohamed Elkarmoty ◽  
Mohamed Ismael
Keyword(s):  
Mechanical Properties ◽  
Tensile Strength ◽  
Failure Mode ◽  
Physical And Mechanical Properties ◽  
P Wave ◽  
Physical Parameters ◽  
Slow Cooling ◽  
Heating And Cooling ◽  
Natural Rock ◽  
The Impact

The awareness of the impact of high temperatures on rock properties is essential to the design of deep geotechnical applications. The purpose of this research is to assess the influence of heating and cooling treatments on the physical and mechanical properties of Egyptian granodiorite as a degrading factor. The samples were heated to various temperatures (200, 400, 600, and 800 °C) and then cooled at different rates, either slowly cooled in the oven and air or quickly cooled in water. The porosity, water absorption, P-wave velocity, tensile strength, failure mode, and associated microstructural alterations due to thermal effect have been studied. The study revealed that the granodiorite has a slight drop in tensile strength, up to 400 °C, for slow cooling routes and that most of the physical attributes are comparable to natural rock. Despite this, granodiorite thermal deterioration is substantially higher for quick cooling than for slow cooling. Between 400:600 °C is ‘the transitional stage’, where the physical and mechanical characteristics degraded exponentially for all cooling pathways. Independent of the cooling method, the granodiorite showed a ductile failure mode associated with reduced peak tensile strengths. Additionally, the microstructure altered from predominantly intergranular cracking to more trans-granular cracking at 600 °C. The integrity of the granodiorite structure was compromised at 800 °C, the physical parameters deteriorated, and the rock tensile strength was negligible. In this research, the temperatures of 400, 600, and 800 °C were remarked to be typical of three divergent phases of granodiorite mechanical and physical properties evolution. Furthermore, 400 °C could be considered as the threshold limit for Egyptian granodiorite physical and mechanical properties for typical thermal underground applications.

scholarly journals Influence of Alumina Nanofibers Sintered by the Spark Plasma Method on Nickel Mechanical Properties

Metals ◽  
2021 ◽  
Vol 11 (4) ◽  
pp. 548 ◽  
Author(s):  
Leonid Agureev ◽  
Valeriy Kostikov ◽  
Zhanna Eremeeva ◽  
Svetlana Savushkina ◽  
Boris Ivanov ◽  
...  
Keyword(s):  
Mechanical Properties ◽  
Tensile Strength ◽  
Elastic Modulus ◽  
Strength Properties ◽  
Alumina Nanoparticles ◽  
Metal Powders ◽  
Wide Range ◽  
The Matrix ◽  
Spark Plasma ◽  
Average Size

The article presents the study of alumina nanoparticles’ (nanofibers) concentration effect on the strength properties of pure nickel. The samples were obtained by spark plasma sintering of previously mechanically activated metal powders. The dependence of the grain size and the relative density of compacts on the number of nanofibers was investigated. It was found that with an increase in the concentration of nanofibers, the average size of the matrix particles decreased. The effects of the nanoparticle concentration (0.01–0.1 wt.%) on the elastic modulus and tensile strength were determined for materials at 25 °C, 400 °C, and 750 °C. It was shown that with an increase in the concentration of nanofibers, a 10–40% increase in the elastic modulus and ultimate tensile strength occurred. A comparison of the mechanical properties of nickel in a wide range of temperatures, obtained in this work with materials made by various technologies, is carried out. A description of nanofibers’ mechanisms of influence on the structure and mechanical properties of nickel is given. The possible impact of impurity phases on the properties of nickel is estimated. The tendency of changes in the mechanical properties of nickel, depending on the concentration of nanofibers, is shown.

scholarly journals The Effect of Water Concentration in Ethyl Alcohol on the Environmentally Assisted Embrittlement of Austempered Ductile Irons

Metals ◽  
2021 ◽  
Vol 11 (1) ◽  
pp. 94
Author(s):  
Petar Janjatovic ◽  
Olivera Eric Cekic ◽  
Leposava Sidjanin ◽  
Sebastian Balos ◽  
Miroslav Dramicanin ◽  
...  
Keyword(s):  
Mechanical Properties ◽  
Tensile Strength ◽  
Cast Iron ◽  
Ultimate Tensile Strength ◽  
Ethyl Alcohol ◽  
Water Concentration ◽  
Different Types ◽  
Influence Of Water ◽  
Iron Material ◽  
Proof Strength

Austempered ductile iron (ADI) is an advanced cast iron material that has a broad field of application and, among others, it is used in contact and for conveyance of fluids. However, it is noticed that in contact with some fluids, especially water, ADI material becomes brittle. The most significant decrease is established for the elongation. However, the influence of water and the cause of this phenomenon is still not fully understood. For that reason, in this paper, the influence of different water concentrations in ethyl alcohol on the mechanical properties of ADI materials was studied. The test was performed on two different types of ADI materials in 0.2, 4, 10, and 100 vol.% water concentration environments, and in dry condition. It was found that even the smallest concentration of water (0.2 vol.%) causes formation of the embrittled zone at fracture surface. However, not all mechanical properties were affected equally and not all water concentrations have been critical. The highest deterioration was established in the elongation, followed by the ultimate tensile strength, while the proof strength was affected least.

Residual Stresses in Intrinsic UD-CFRP-Steel-Laminates - Experimental Determination, Identification of Sources, Effects and Modification Approaches

2015 ◽  
Vol 825-826 ◽  
pp. 369-376 ◽  
Author(s):  
Robert Prussak ◽  
Daniel Stefaniak ◽  
Christian Hühne ◽  
Michael Sinapius
Keyword(s):  
Mechanical Properties ◽  
Residual Stress ◽  
Tensile Strength ◽  
Epoxy Composite ◽  
Thermal Residual Stress ◽  
Fiber Metal Laminates ◽  
Fiber Metal ◽  
Impact Energies ◽  
The Impact ◽  
Specific Impact

This paper focuses on the reduction of process-related thermal residual stress in fiber metal laminates and its impact on the mechanical properties. Different modifications during fabrication of co-cure bonded steel/carbon epoxy composite hybrid structures were investigated. Specific examinations are conducted on UD-CFRP-Steel specimens, modifying temperature, pressure or using a thermal expansion clamp during manufacturing. The impact of these parameters is then measured on the deflection of asymmetrical specimens or due yield-strength measurements of symmetrical specimens. The tensile strength is recorded to investigate the effect of thermal residual stress on the mechanical properties. Impact tests are performed to determine the influence on resulting damage areas at specific impact energies. The experiments revealed that the investigated modifications during processing of UD-CFRP-Steel specimens can significantly lower the thermal residual stress and thereby improve the tensile strength.

Sign in / Sign up

Export Citation Format

Share Document