scholarly journals Laboratory-Scale Hydraulic Fracturing Experiments Using Super-Critical State Carbon Dioxide, Water and Viscous Oil

2015 ◽  
Vol 131 (4) ◽  
pp. 115-121
Author(s):  
Tsuyoshi ISHIDA ◽  
Yuya NAGAYA ◽  
Shuhei INUI ◽  
Ziad BENNOUR ◽  
Youqing CHEN ◽  
...  
Keyword(s):  
Carbon Dioxide ◽  
Hydraulic Fracturing ◽  
Critical State ◽  
Laboratory Scale ◽  
Viscous Oil ◽  
Fracturing Experiments

scholarly journals Advances in Laboratory-Scale Hydraulic Fracturing Experiments

2020 ◽  
Vol 2020 ◽  
pp. 1-18
Author(s):  
Yelin Qian ◽  
Panpan Guo ◽  
Yixian Wang ◽  
Yanlin Zhao ◽  
Hang Lin ◽  
...  
Keyword(s):  
Hydraulic Fracturing ◽  
Laboratory Scale ◽  
Future Research ◽  
Accurate Estimation ◽  
Hydraulic Fractures ◽  
Scaling Analysis ◽  
Research Attention ◽  
Complete Control ◽  
Geological Conditions ◽  
Fracturing Experiments

Hydraulic fracturing has been widely applied to stimulate the natural gas and oil production from unconventional reservoirs. To optimize the design of hydraulic fracturing in this application, an accurate estimation of the initiation and propagation of hydraulic fractures is indispensable. However, it still remains challenging as a result of the complex stress state and geological conditions. On account of their ability to complete control some significant factors and efficient observation of fracture geometry, laboratory-scale hydraulic fracturing experiments have received abundant research attention in recent years. This paper presents a review of the state of the art of laboratory-scale hydraulic fracturing experiments, focusing on the scaling analysis, experimental setup, fracturing fluids, and sample preparation. A discussion of the directions for future research is also provided with the intention of stimulating the development of the experimental technique for investigating hydraulic fracturing.

scholarly journals Crack Extension in Hydraulic Fracturing of Shale Cores Using Viscous Oil, Water, and Liquid Carbon Dioxide

2015 ◽  
Vol 48 (4) ◽  
pp. 1463-1473 ◽  
Author(s):  
Ziad Bennour ◽  
Tsuyoshi Ishida ◽  
Yuya Nagaya ◽  
Youqing Chen ◽  
Yoshitaka Nara ◽  
...  
Keyword(s):  
Carbon Dioxide ◽  
Hydraulic Fracturing ◽  
Crack Extension ◽  
Liquid Carbon ◽  
Liquid Carbon Dioxide ◽  
Viscous Oil ◽  
Oil Water

Experimental Investigation on Enhanced-Oil-Recovery Mechanisms of Using Supercritical Carbon Dioxide as Prefracturing Energized Fluid in Tight Oil Reservoir

SPE Journal ◽  
2021 ◽  
pp. 1-16
Author(s):  
Lei Li ◽  
Zheng Chen ◽  
Yu-Liang Su ◽  
Li-Yao Fan ◽  
Mei-Rong Tang ◽  
...  
Keyword(s):  
Carbon Dioxide ◽  
Water Resources ◽  
Supercritical Carbon Dioxide ◽  
Hydraulic Fracturing ◽  
Clay Minerals ◽  
Oil Production ◽  
Tight Oil ◽  
Injection Mode ◽  
Oil Development ◽  
Live Oil

Summary Fracturing is the necessary means of tight oil development, and the most common fracturing fluid is slickwater. However, the Loess Plateau of the Ordos Basin in China is seriously short of water resources. Therefore, the tight oil development in this area by hydraulic fracturing is extremely costly and environmentally unfriendly. In this paper, a new method using supercritical carbon dioxide (CO2) (ScCO2) as the prefracturing energized fluid is applied in hydraulic fracturing. This method can give full play to the dual advantages of ScCO2 characteristics and mixed-water fracturing technology while saving water resources at the same time. On the other hand, this method can reduce reservoir damage, change rock microstructure, and significantly increase oil production, which is a development method with broad application potential. In this work, the main mechanism, the system-energy enhancement, and flowback efficiency of ScCO2 as the prefracturing energized fluid were investigated. First, the microscopic mechanism of ScCO2 was studied, and the effects of ScCO2 on pores and rock minerals were analyzed by nuclear-magnetic-resonance (NMR) test, X-ray-diffraction (XRD) analysis, and scanning-electron-microscope (SEM) experiments. Second, the high-pressurechamber-reaction experiment was conducted to study the interaction mechanism between ScCO2 and live oil under formation conditions, and quantitively describe the change of high-pressure physical properties of live oil after ScCO2 injection. Then, the numerical-simulation method was applied to analyze the distribution and existence state of ScCO2, as well as the changes of live-oil density, viscosity, and composition in different stages during the full-cycle fracturing process. Finally, four injection modes of ScCO2-injection core-laboratory experiments were designed to compare the performance of ScCO2 and slickwater in terms of energy enhancement and flowback efficiency, then optimize the optimal CO2-injection mode and the optimal injection amount of CO2slug. The results show that ScCO2 can dissolve calcite and clay minerals (illite and chlorite) to generate pores with sizes in the range of 0.1 to 10 µm, which is the main reason for the porosity and permeability increases. Besides, the generated secondary clay minerals and dispersion of previously cemented rock particles will block the pores. ScCO2 injection increases the saturation pressure, expansion coefficient, volume coefficient, density, and compressibility of crude oil, which are the main mechanisms of energy increase and oil-production enhancement. After analyzing the four different injection-mode tests, the optimal one is to first inject CO2 and then inject slickwater. The CO2 slug has the optimal value, which is 0.5 pore volume (PV) in this paper. In this paper, the main mechanisms of using ScCO2 as the prefracturing energized fluid are illuminated. Experimental studies have proved the pressure increase, production enhancement, and flowback potential of CO2 prefracturing. The application of this method is of great significance to the protection of water resources and the improvement of the fracturing effect.

scholarly journals Full-waveform-based characterization of acoustic emission activity in a mine-scale experiment: a comparison of conventional and advanced hydraulic fracturing schemes

2020 ◽  
Vol 222 (1) ◽  
pp. 189-206 ◽  
Author(s):  
Peter Niemz ◽  
Simone Cesca ◽  
Sebastian Heimann ◽  
Francesco Grigoli ◽  
Sebastian von Specht ◽  
...  
Keyword(s):  
Acoustic Emission ◽  
Hydraulic Fracturing ◽  
Induced Seismicity ◽  
Large Scale ◽  
Sampling Rate ◽  
Fracture Plane ◽  
B Values ◽  
Full Waveform ◽  
Scale Experiment ◽  
Fracturing Experiments

SUMMARY Understanding fracturing processes and the hydromechanical relation to induced seismicity is a key question for enhanced geothermal systems (EGS). Commonly massive fluid injection, predominately causing hydroshearing, are used in large-scale EGS but also hydraulic fracturing approaches were discussed. To evaluate the applicability of hydraulic fracturing techniques in EGS, six in situ, multistage hydraulic fracturing experiments with three different injection schemes were performed under controlled conditions in crystalline rock at the Äspö Hard Rock Laboratory (Sweden). During the experiments the near-field ground motion was continuously recorded by 11 piezoelectric borehole sensors with a sampling rate of 1 MHz. The sensor network covered a volume of 30×30×30 m around a horizontal, 28-m-long injection borehole at a depth of 410 m. To extract and characterize massive, induced, high-frequency acoustic emission (AE) activity from continuous recordings, a semi-automated workflow was developed relying on full waveform based detection, classification and location procedures. The approach extended the AE catalogue from 196 triggered events in previous studies to more than 19 600 located AEs. The enhanced catalogue, for the first time, allows a detailed analysis of induced seismicity during single hydraulic fracturing experiments, including the individual fracturing stages and the comparison between injection schemes. Beside the detailed study of the spatio-temporal patterns, event clusters and the growth of seismic clouds, we estimate relative magnitudes and b-values of AEs for conventional, cyclic progressive and dynamic pulse injection schemes, the latter two being fatigue hydraulic fracturing techniques. While the conventional fracturing leads to AE patterns clustered in planar regions, indicating the generation of a single main fracture plane, the cyclic progressive injection scheme results in a more diffuse, cloud-like AE distribution, indicating the activation of a more complex fracture network. For a given amount of hydraulic energy (pressure multiplied by injected volume) pumped into the system, the cyclic progressive scheme is characterized by a lower rate of seismicity, lower maximum magnitudes and significantly larger b-values, implying an increased number of small events relative to the large ones. To our knowledge, this is the first direct comparison of high resolution seismicity in a mine-scale experiment induced by different hydraulic fracturing schemes.

scholarly journals Laboratory-scale model of carbon dioxide deposition for soil stabilisation

2016 ◽  
Vol 8 (2) ◽  
pp. 178-186 ◽  
Author(s):  
Mohammad Hamed Fasihnikoutalab ◽  
Afshin Asadi ◽  
Bujang Kim Huat ◽  
Paul Westgate ◽  
Richard J. Ball ◽  
...  
Keyword(s):  
Carbon Dioxide ◽  
Laboratory Scale ◽  
Scale Model ◽  
Soil Stabilisation
Sign in / Sign up

Export Citation Format

Share Document