scholarly journals X-Ray Stress Measurement of Nickel-Base Single Crystal Superalloy Using Two-Dimensional PSPC

2007 ◽  
Vol 56 (7) ◽  
pp. 594-601 ◽  
Author(s):  
Shutarou MACHIYA ◽  
Keisuke TANAKA ◽  
Yoshiaki AKINIWA
Keyword(s):  
Single Crystal ◽  
Stress Measurement ◽  
Single Crystal Superalloy ◽  
Two Dimensional ◽  
X Ray ◽  
Nickel Base

Interdiffusion Behavior of Electroplated Platinum-Iridium Alloys on Nickel-Base Single Crystal Superalloy TMS-82+

2006 ◽  
Vol 522-523 ◽  
pp. 293-300
Author(s):  
Ying Na Wu ◽  
Aya S. Suzuki ◽  
Hideyuki Murakami ◽  
Seiji Kuroda
Keyword(s):  
Chemical Composition ◽  
Single Crystal ◽  
Intermetallic Compounds ◽  
Single Crystal Superalloy ◽  
Outward Diffusion ◽  
X Ray ◽  
Diffusion Treatment ◽  
Ordered Intermetallic ◽  
Nickel Base ◽  
Depth Concentration

In the present study, platinum-iridium alloys (Ir = 15.8, 27.3, 36.1, 100at.%) were electroplated on a nickel-base single crystal superalloy TMS-82+ followed by a diffusion treatment at 1373K for 1 h. Interdiffusion behavior between the Pt-Ir films and substrates was investigated in terms of chemical composition, phase constitution and morphology. X-ray analysis revealed that annealed specimens consisted of several fcc solid solutioned phases with various lattice parameters, together with ordered intermetallic compounds (L12-(Pt,Ni)3Al and B2-(Ir,Ni)Al), due to the inward diffusion of Pt and Ir from the electrodeposited films to the superalloy substrates, and the outward diffusion of solute elements (Ni, Al, Cr, Co) in the superalloy substrates into the films during annealing. The depth concentration analysis indicated that the Pt-36.1Ir film effectively retarded the outward diffusion of solute elements, especially nickel, from the substrate.

The Effect of Tensile Stress on Oxidation Behavior of Nickel-Base Single Crystal Superalloy

2021 ◽  
pp. 109737
Author(s):  
Hai-Qing Pei ◽  
Meng Li ◽  
Ping Wang ◽  
Xiao-Hu Yao ◽  
Zhi-Xun Wen ◽  
...  
Keyword(s):  
Tensile Stress ◽  
Single Crystal ◽  
Oxidation Behavior ◽  
Single Crystal Superalloy ◽  
Nickel Base

In-situ X-ray tomography investigation of pore damage effects during a tensile test of a Ni-based single crystal superalloy

2021 ◽  
pp. 111180
Author(s):  
Keli Liu ◽  
Junsheng Wang ◽  
Bing Wang ◽  
Pengcheng Mao ◽  
Yanhong Yang ◽  
...  
Keyword(s):  
Tensile Test ◽  
Single Crystal ◽  
Single Crystal Superalloy ◽  
X Ray

Time Dependence of γ/γ' Lattice Mismatch in Creep-Deformed Single Crystal Superalloy SC16 at 1173 K

2007 ◽  
Vol 539-543 ◽  
pp. 3059-3063 ◽  
Author(s):  
G. Schumacher ◽  
N. Darowski ◽  
I. Zizak ◽  
Hellmuth Klingelhöffer ◽  
W. Chen ◽  
...  
Keyword(s):  
Single Crystal ◽  
Lattice Mismatch ◽  
Lattice Misfit ◽  
Peak Position ◽  
Single Crystal Superalloy ◽  
Tensile Creep ◽  
Full Width ◽  
X Ray Diffraction ◽  
X Ray ◽  
Time Period

The profiles of 001 and 002 reflections have been measured at 1173 K as a function of time by means of X-ray diffraction (XRD) on tensile-creep deformed specimens of single crystal superalloy SC16. Decrease in line width (full width at half maximum: FWHM) by about 7 % and increase in peak position by about 3x10-4 degrees was detected after 8.5x104 s. Broadening of the 002 peak profile indicated a more negative value of the lattice misfit after the same time period. The results are discussed in the context of the anisotropic arrangement of dislocations at the γ/γ’ interfaces during creep and their rearrangement during the thermal treatment at 1173 K.

Tensile behavior of nickel-base single-crystal superalloy DD6

2015 ◽  
Vol 636 ◽  
pp. 608-612 ◽  
Author(s):  
Xinhong Xiong ◽  
Dunmiao Quan ◽  
Pengdan Dai ◽  
Zhiping Wang ◽  
Qiaoxin Zhang ◽  
...  
Keyword(s):  
Single Crystal ◽  
Tensile Behavior ◽  
Single Crystal Superalloy ◽  
Nickel Base

Effect of misorientation on the fatigue life of nickel-base single crystal superalloy DD5 at 980°C

2021 ◽  
pp. 106479
Author(s):  
Piao Li ◽  
Wen Jiang ◽  
Shao-Shi Rui ◽  
Wei-xing Yao ◽  
Hui-ji Shi ◽  
...  
Keyword(s):  
Fatigue Life ◽  
Single Crystal ◽  
Single Crystal Superalloy ◽  
Nickel Base

Creep Behavior of a 4.5% Re Nickel-Base Single Crystal Superalloy at High Temperature

2015 ◽  
Vol 750 ◽  
pp. 139-144 ◽  
Author(s):  
De Long Shu ◽  
Su Gui Tian ◽  
Xin Ding ◽  
Jing Wu ◽  
Qiu Yang Li ◽  
...  
Keyword(s):  
Heat Treatment ◽  
High Temperature ◽  
Single Crystal ◽  
Deformation Mechanism ◽  
Creep Property ◽  
Single Crystal Superalloy ◽  
Micro Cracks ◽  
Initiation And Propagation ◽  
Temperature Ranges ◽  
Nickel Base

By means of heat treatment and creep property measurement, an investigation has made into the creep behaviors of a containing 4.5% Re nickel-base single crystal superalloy at high temperature. Results show that the elements W, Mo and Re are enriched in the dendrite arm regions, the elements Al, Ta, Cr and Co are enriched in the inter-dendrite region, and the segregation extent of the elements may be obviously reduced by means of heat treatment at high temperature. In the temperature ranges of 1070--1100 °C, the 4.5% Re single crystal nickel-based superallloy displays a better creep resistance and longer creep life. The deformation mechanism of the alloy during steady state creep is dislocations slipping in the γ matrix and climbing over the rafted γ′ phase. In the later stage of creep, the deformation mechanism of alloy is dislocations slipping in the γ matrix, and shearing into the rafted γ′ phase, which may promote the initiation and propagation of the micro-cracks at the interfaces of γ/γ′ phases up to the occurrence of creep fracture.

Lattice-constant and stress measurement in single crystals: a new method

2005 ◽  
Vol 38 (4) ◽  
pp. 678-684 ◽  
Author(s):  
Balder Ortner
Keyword(s):  
Single Crystal ◽  
Single Crystals ◽  
Lattice Constant ◽  
Stress Measurement ◽  
New Method ◽  
Lattice Plane ◽  
X Ray ◽  
Advantages And Disadvantages

A method for the X-ray determination of lattice-plane distances is given. Similar to Bond's method, it is based on the measurement of rocking curves, with some advantages and disadvantages compared with the former method. The new method is especially designed for single-crystal stress measurement. Its usefulness is demonstrated in two examples of lattice-constant and stress measurement.

Sign in / Sign up

Export Citation Format

Share Document