scholarly journals EVALUATION OF THE HYBRID EFFECT OF HYBRID COMPOSITE FROM THE VIEWPOINT OF STRENGTH OF BRIDGING FIBERS IN A CRACK

1998 ◽  
Vol 47 (9Appendix) ◽  
pp. 171-178
Author(s):  
Ming JI ◽  
Haruo ISHIKAWA
Keyword(s):  
Hybrid Composite ◽  
Hybrid Effect ◽  
Bridging Fibers

Hybrid effect of carbon nanotube film and ultrathin carbon fiber prepreg composites

2016 ◽  
Vol 36 (6) ◽  
pp. 452-463 ◽  
Author(s):  
Jiao Pan ◽  
Min Li ◽  
Shaokai Wang ◽  
Yizhuo Gu ◽  
Qingwen Li ◽  
...  
Keyword(s):  
Carbon Nanotube ◽  
Carbon Fiber ◽  
Hybrid Composite ◽  
Hybrid Composites ◽  
Chemical Vapor ◽  
Interfacial Bonding ◽  
Damping Capacity ◽  
Failure Behavior ◽  
Hybrid Effect ◽  
Carbon Nanotube Film

This paper successfully interlaced floating catalyst chemical vapor deposition-grown carbon nanotube film and ultrathin carbon fiber prepreg to achieve strong and flexible carbon nanotube/carbon fiber hybrid composites with high carbon nanotube loading. Epoxidation was also introduced to improve interlaminar interfacial bonding. It was found that pristine carbon nanotube film/carbon fiber interply hybrid composite (carbon fiber/carbon nanotube/carbon fiber) showed sudden and brittle failure, while epoxidation caused a gradual failure behavior. Hybrid effect analysis suggested that the improved tensile performance and synergistic effect of epoxidized carbon nanotube film/carbon fiber hybrid composite were attributed to good load transfer and suppressed delamination induced by improved interfacial bonding. In addition carbon fiber/carbon nanotube/carbon fiber manifested excellent damping capacity with the maximum loss factor of 0.13. The in-plane electrical conductivity of composite with global carbon nanotube content of 21 wt% increased to the same order of magnitude as carbon nanotube film composite. The excellent mechanical, damping, and electrical properties demonstrated great potential for both structural and multifunctional applications of the resultant hybrid composites.

scholarly journals Tensile Properties of Woven Carbon/Kevlar Reinforced Epoxy Hybrid Composite

2017 ◽  
Vol 890 ◽  
pp. 20-23 ◽  
Author(s):  
Nurain Hashim ◽  
Dayang Laila Abdul Majid ◽  
Rizal Zahari ◽  
Noorfaizal Yidris
Keyword(s):  
Composite Material ◽  
Hybrid Composite ◽  
Impact Resistance ◽  
High Strength ◽  
Tensile Behaviour ◽  
Carbon Fibres ◽  
Fibre Direction ◽  
Hybrid Effect ◽  
Hybrid Composite Material ◽  
Selection Of

Carbon fibres and Kevlar fibres are among the commonly used fibres in the composite industry. As carbon fibres usually known for its superior strength, its low impact resistance limited its application in the industry. However, further research found that combining the high strength fibres with more ductile fibres like Kevlar could improve the material’s impact resistance. This hybrid effect was also found to be most effective by using intra-ply woven hybrid fibres in the composite. In this work, hybrid composite material was fabricated by using woven carbon-Kevlar cloths with epoxy matrix and the mechanical properties are determined at 0 ̊, 45 ̊ and 90 ̊. The hybrid composite material was found to have highest tensile strength at 0 ̊ (carbon) direction. As the material’s strength and tensile behaviour are different at every fibre types, the selection of fibre direction of the woven cloth in loading is an important criteria in any applications.

Hybrid Effect on Hybrid Composite Reinforced Carbon Fibers and Flax Fibers

2019 ◽  
Vol 801 ◽  
pp. 101-106
Author(s):  
Anh Vu Nguyen ◽  
Karine Charlet ◽  
Belhassen Chedli Bouzgarrou ◽  
Ky Nam Pham ◽  
Trong Dai Vu ◽  
...  
Keyword(s):  
Carbon Fibers ◽  
Hybrid Composite ◽  
Hybrid Composites ◽  
Experimental Tests ◽  
Experimental Results ◽  
Woven Composites ◽  
Hybrid Effect ◽  
Flax Fibers ◽  
Homogenization Model ◽  
Good Agreement

In this paper, hybrid composite made of carbon woven fibers and flax woven fibers is studied. This hybrid composite structure takes advantages of high resistance, high stiffness of carbon fibers and high damping and low density of flax fibers. Different structures of flax woven composites, carbon woven composites and hybrid composites were fabricated and tested experimentally. With aim of predicting the properties of the hybrid composite, a homogenization model of the composite is established. The homogenization model is based on the rule-of-mixture and iso-strain assumption. The results of the analytical homogenization model (AHM) are then compared with the results of experimental tests. The results show a good agreement between the AHM and the experimental results at the homogenization level of the woven composite. However, at the hybrid composite homogenization level, the experimental results present considerably higher stiffness than analytical results that is explained by hybrid effect on the hybrid composite.

Experimentally Study on Mechanical Behavior of CF and GF Hybrid Fiber-Reinforced Plastics

2011 ◽  
Vol 332-334 ◽  
pp. 1082-1086
Author(s):  
Zhi Yun Wu ◽  
Rui Fang Ni
Keyword(s):  
Composite Materials ◽  
Carbon Fiber ◽  
Glass Fiber ◽  
Hybrid Composite ◽  
Tensile Behavior ◽  
Fiber Reinforced ◽  
Hybrid Fiber ◽  
Hybrid Effect ◽  
Reinforced Plastics ◽  
Fiber Reinforced Plastics

The multiaxial warp-knit fabrics of glass fiber or carbon fiber as the structure materials have widely applied to many industries. In this study, in order to combined the advantages of these two fibers, glass fiber and carbon fiber were employed as reinforcement materials in RIMR 135 epoxy resins, and hybrid composites were formed. The tensile behavior of hybrid fiber-reinforced plastics (HFRP) were compared with CFRP and GFRP on the longitudinal orientation . The results suggested that HFRP was high tensile strength and modulus of elasticity. Scanning electron microscopy was used to characterize the morphology of damaged surfaces. The micrographs revealed that CF and GF maintained their own tension behavior in the hybrid composite materials as well in the neat FRP materials. The hybrid effect of HFRP was investigated by the hybrid theory, which was compared to the experimental results. It was confirmed that the tensile behavior of the hybrid composite materials matched the plus hybrid effect.

Experimental investigation of double-lap bolted composite joints with different outer plates subjected to bending loads

2018 ◽  
Vol 26 (7) ◽  
pp. 408-419 ◽  
Author(s):  
Chengqiang Luo ◽  
Bin Yang ◽  
Fu-Zhen Xuan ◽  
Liang He ◽  
Kang Yang
Keyword(s):  
Hybrid Composite ◽  
Composite Laminates ◽  
Hybrid Composites ◽  
Base Material ◽  
Composite Panel ◽  
Hybrid Effect ◽  
Composite Joint ◽  
Flexural Testing ◽  
Glass Fibre Reinforced ◽  
Bending Loads

A double-lap bolted composite joint was designed. In the joint, the base material was woven glass fibre–reinforced epoxy (WGF/Epoxy) composite, and the outer plates were WGF/Epoxy, woven carbon fibre–reinforced epoxy (WCF/Epoxy) and WGF/WCF/Epoxy hybrid composite laminates, respectively. Fundamental mechanical properties of the composite panels were determined. Flexural testing of the designed bolted joints was performed. Scanning electron microscopy was used to compare the damage modes. The interlaminar curves could be divided into different stages. The flexural load–displacement curves had progressive damage characteristics. The strengths of joints with hybrid composite panel as outer plates were between those of pure specimens, and hybrid composites with WGF as contact surface had a positive hybrid effect.

Sign in / Sign up

Export Citation Format

Share Document