scholarly journals Moment Capacity Ratio at Column – Beam Joint in a RC Framed Structure

2020 ◽  
Vol 6 (3) ◽  
pp. 1-7
Author(s):  
Jawala Kumar ◽  
Mr. Varun Kumar Sikka
Keyword(s):  
Reliability Index ◽  
Moment Capacity ◽  
Capacity Ratio ◽  
Rc Frames ◽  
A Value ◽  
Seismic Location ◽  
Column Joint ◽  
The Moment ◽  
National Disaster ◽  
Type Of Failure

Beam-column joint is the gap in the modern ductile design of building. Especially under the earthquake loading this is more susceptible to damage. Due to brittle nature of failure this type of failure cannot be afford. Since 1970’s this areas is under the light of research, but with the paper of Park and Paul, It got momentum. But still due to versatile nature of the joints core behaviour, the problem is still persisting. Though many international codes recommend the moment capacity ratio at beam column joint to be more than one, There are discrepancies among the major international codes with regard to MCR. Indian standard codes for design of RC framed buildings are silent on this aspect. Draft 13920 (2014) code suggests a value of MCR similar to other international codes without proper theoretical basis. Hence a rational study is required on the values of MCR. A computationally attractive procedure for calculating flexural capacity of column developed for determining MCR at a beam-column joint. To reach at an appropriate and acceptable MCR for capacity design of RC framed building reliability based approach is done. This research deals with the fragility and reliability analysis of five, seven and ten storey RC frames designed using various values of MCR ranging from 1.0 to 3.2. The RC frames are designed as per IS 1893 (2002) for all seismic zones. Hazard curves required of various seismic location in India (like zone II, III, IV and V) has been selected from National Disaster Management Authority, Government of India. Seismic risk assessment of all the designed buildings is conducted and based on the achieved Reliability Index and the Target Reliability Index minimum value of Moment Capacity Ratio (MCR) is suggested.

Flexural Resistance of Steel-Coconut Shell Concrete-Steel Composite Beam with Normal and J-Hook Shear Studs

2020 ◽  
Vol 12 (9) ◽  
Author(s):  
Lakshmi Thangasamy ◽  
◽  
Gunasekaran Kandasamy ◽  
Keyword(s):  
Concrete Strength ◽  
Steel Plates ◽  
Coconut Shell ◽  
Core Material ◽  
River Sand ◽  
Concrete Core ◽  
Conventional Concrete ◽  
Moment Capacity ◽  
The Moment ◽  
Core Concrete

Many researches on double skin sandwich having top and bottom steel plates and in between concrete core called as steel-concrete-steel (SCS) were carried out by them on this SCS type using with different materials. Yet, use of coconut shell concrete (CSC) as a core material on this SCS form construction and their results are very limited. Study investigated to use j-hook shear studs under flexure in the concept of steel-concrete-steel (SCS) in which the core concrete was CSC. To compare the results of CSC, the conventional concrete (CC) was also considered. To study the effect of quarry dust (QD) in its place of river sand (RS) was also taken. Hence four different mixes two without QD and two with QD both in CC and CSC was considered. The problem statement is to examine about partial and fully composite, moment capacity, deflection and ductility properties of CSC used SCS form of construction. Core concrete strength and the j-hook shear studs used are influences the moment carrying capacity of the SCS beams. Use of QD in its place of RS enhances the strength of concrete produced. Deflections predicted theoretically were compared with experimental results. The SCS beams showed good ductility behavior.

Experimental study of moment carrying behavior of typical Tibetan timber beam-column joints

2021 ◽  
pp. 136943322110015
Author(s):  
Ting Guo ◽  
Na Yang ◽  
Huichun Yan ◽  
Fan Bai
Keyword(s):  
Bending Moment ◽  
Structural Performance ◽  
Test Results ◽  
Timber Beam ◽  
Rotational Stiffness ◽  
Trilinear Model ◽  
Column Joint ◽  
Loading Tests ◽  
The Moment ◽  
Relationship Of

This study aimed to investigate the moment carrying behavior of typical Tibetan timber beam-column joints under monotonic vertical static load and also evaluate the influence of length ratio of Gongmu to beam (LRGB) and dowels layout on the structural performance of the joint. Six full-scale specimens were fabricated with same construction but different Gongmu length and dowels position. The moment carrying performance of beam-column joints in terms of failure mode, moment resistance, and rotational stiffness of joints were obtained via monotonic loading tests. Test results indicated that all joints are characterized by compressive failure perpendicular to grain of Ludou. Additionally, it was found that greater LRGB leads to greater initial rotational stiffness and maximum moment of the joint by an increase of restraint length for beam end; however, offsetting dowels toward column resulted smaller stiffness and ultimate bending moment of joints, particularly, offsetting Beam-Gongmu dowels toward column changed the moment-rotation curve pattern of the beam-column joint, accompanied by a hardening stiffness at last phase. Furthermore, a simplified trilinear model was proposed to represent the moment-rotation relationship of the typical Tibetan timber beam-column joint.

scholarly journals Flexural Behavior of Steel Beam Strengthening by Prestressing Strands

2018 ◽  
Vol 7 (4.20) ◽  
pp. 572
Author(s):  
Dr. Mohammed M. Rasheed ◽  
Mr. Ali F. Atshan ◽  
Mr. Kamal Sh. Mahmoud
Keyword(s):  
Reference Beam ◽  
Flexural Behavior ◽  
Radius Of Curvature ◽  
Steel Beams ◽  
Steel Beam ◽  
Bottom Flange ◽  
Moment Capacity ◽  
External Prestressing ◽  
Prestressing Strands ◽  
The Moment

Seven simply supported steel beams were tested to explain the effect of strengthening by external prestressing strands. All of the beams have the same steel section, clear span length and the strengthening samples which implemented by two external prestressing strands. The tested beams are divided into two categories according to existing of external prestressing strands, the first category consists of one steel beam as a reference, while, the second group deals with steel beams strengthening by external prestressing strands and consists of six steel beams divided according to the eccentricity location of prestressing strand with jacking stress (815 MPa). From experimental results, it was found that the moment curvature curves behavior for the tested beams are stiffer and with less ductility than the reference beams and the ultimate moment capacity is increased with increasing the eccentricity location. While, the maximum radius of curvature at bottom flange decreases with increasing the eccentricity location as compare with the reference beam.   

Database of rocking shallow foundation performance: Slow-cyclic and monotonic loading

2020 ◽  
Vol 36 (3) ◽  
pp. 1585-1606 ◽  
Author(s):  
Manouchehr Hakhamaneshi ◽  
Bruce L. Kutter ◽  
Andreas G. Gavras ◽  
Sivapalan Gajan ◽  
Angelos Tsatsis ◽  
...  
Keyword(s):  
Monotonic Loading ◽  
Testing Equipment ◽  
Shallow Foundation ◽  
Moment Capacity ◽  
Wide Range ◽  
Supporting Soil ◽  
Rocking Foundations ◽  
System Properties ◽  
The Moment ◽  
Cyclic Loading Tests

Many physical model tests have examined the performance of rocking foundations during cyclic and seismic loading. These tests varied in model size, testing equipment, superstructure properties, footing shape, supporting soil environment, and loading protocol. “FoRCy, Foundation Rocking database of Cyclic and Monotonic Loading” is a new database (published at https://datacenterhub.org/ ), summarizing the results of monotonic and slow-cyclic loading tests of rocking foundations. The database consists of columns identifying testing equipment and facility, soil, superstructure, and system properties, as well as loading protocol and results. The database contains 456 records (rows), each one being unique in either model configuration or loading amplitude. To illustrate its value, this article shows correlations between (1) settlement, rotation, and factor of safety with respect to bearing capacity and (2) moment and cumulative rotation for shallow footings. Data indicate that the rotation required to mobilize the moment capacity is surprisingly constant (about 0.01 radians) for a wide range of experiments.

Conventional and centrifuge model studies of the moment carrying capacity of short pier foundations in clay

1995 ◽  
Vol 32 (6) ◽  
pp. 976-988 ◽  
Author(s):  
G.J.W. King ◽  
M. Laman
Keyword(s):  
Carrying Capacity ◽  
Three Dimensional ◽  
Model Tests ◽  
Rotational Stability ◽  
Moment Capacity ◽  
Centrifuge Model ◽  
Model Studies ◽  
Saturated Clay ◽  
The Moment ◽  
Centrifuge Model Tests

An experimental investigation into the moment carrying capacity of short rigid pier foundations in saturated clay is described. Scale models of square piers with different breadths and depths were used in both conventional and centrifugal studies. The results show that the relationships between moment and rotation are nonlinear but do not exhibit any peak values, and that moment limits, defined by limiting angular rotations, increase with increases in pier depth and breadth. Empirical equations are derived between moment carrying capacity and pier geometry, for a range of limiting rotations, and a very close fit is demonstrated between the moment–rotation relationships obtained using these equations and the actual data obtained from the model tests. It is shown that, at the same pier rotations, the moment carrying capacities observed in the centrifugal model tests are significantly larger than those in the conventional model tests. Numerical analyses of the prototype geometries were also carried out using a three-dimensional nonlinear finite-element computer program. The results are shown to provide satisfactory agreement with the moment–rotation behaviour and working limits observed in the centrifuge model tests. Thus, even though conventional modelling is usually legitimate for determining the immediate bearing capacity of rigid foundations in saturated clay, their rotational stability is shown to be significantly affected by self-weight stresses. Some of the existing methods for designing short piers subjected to moments are examined and compared with the results from the centrifuge model tests. Key words : pier foundation, clay, moment capacity.

Bridge Girders with Corrugated Webs

2000 ◽  
Vol 1696 (1) ◽  
pp. 162-170 ◽  
Author(s):  
Mohamed Elgaaly ◽  
Anand Seshadri ◽  
Roberto Rodriquez ◽  
Sherif Ibrahim
Keyword(s):  
Moment Capacity ◽  
Design Recommendations ◽  
Plate Girders ◽  
Analytical Results ◽  
Corrugated Webs ◽  
Shear Buckling ◽  
The Moment ◽  
The Cost ◽  
Web Plates ◽  
The Web

In plate girders, the use of corrugated webs permits the use of thin web plates without stiffeners, which reduces the cost of beam fabrication and improves fatigue life. Experimental and analytical studies on the behavior of girders with corrugated webs were conducted that have led to design recommendations. For girders with corrugated webs subjected to shear, it was noted from the experimental as well as the analytical results that failure of the web occurs because of local or global shear buckling, which depends on the corrugation configuration. For girders with corrugated webs subjected to uniform bending, the failure was due to yielding and vertical buckling of the compression flange into the web. The test and analytical results indicate that the web offered negligible contribution to the moment-carrying capacity of the beam, and the ultimate moment capacity may be calculated on the basis of the flange yielding, ignoring any contribution from the web. The behavior of girders with corrugated webs under in-plane compressive edge loads applied directly on the top flange was investigated, and design recommendations are made. Tests to examine the behavior of girders with corrugated webs under repeated loads are few. The results from the available tests are reported and compared with the results from test on conventionally stiffened girders with flat webs.

Seismic Performance of In-Filled Steel-Concrete Composite Columns Using Fiber Analysis Method

2006 ◽  
Vol 326-328 ◽  
pp. 1821-1824 ◽  
Author(s):  
Jin Ho Kim ◽  
Tae Wook Kim
Keyword(s):  
Seismic Performance ◽  
Axial Loading ◽  
Steel Tube ◽  
Moment Capacity ◽  
Composite Columns ◽  
Fiber Analysis ◽  
Lateral Response ◽  
Analysis Technique ◽  
The Moment ◽  
Cft Column

The study for cyclic load-displacement relationship and seismic characteristics of square Concrete-Filled Steel Tubular (CFT) columns is experimentally and analytically conducted. Nine CFT column specimens are tested under constant axial loading and monotonically increasing lateral loading. For predicting the strength and ductility of CFT columns, fiber analysis technique is used. The analytical results show reasonable agreement with experiment results and the moment capacity of CFT columns is predicted with reasonable accuracy using the fiber model. The influence of the steel tube on the lateral response of CFT columns is studied for the evaluation of seismic performance.

The Analytic and the Relational: Inquiring into Practice

2017 ◽  
Vol 50 (2) ◽  
pp. 171-189 ◽  
Author(s):  
Farhad Dalal
Keyword(s):  
Therapeutic Process ◽  
A Value ◽  
Radical Uncertainty ◽  
The Moment

In this article I track the shift in my practice from the ‘analytic’ towards a ‘relational’. I contrast the positivist stance of the classical analyst with a post-modernist stance of the relationist. I argue that whilst the ‘analytic’ norm requires the therapist to be opaque and detached, the ‘relational’ stance requires the therapist to be involved and transparent. I suggest that a form of radical uncertainty is at the heart of the therapeutic process. I argue for the therapist navigating the turbulent waters of radical uncertainty not through composed neutrality, but through a value-laden commitment to their partial sense of things in the moment.

Sign in / Sign up

Export Citation Format

Share Document