scholarly journals To Maximize Heating Performance of Solar Parabolic Trough Collector by Geometrical Variation Using CFD Analysis

2019 ◽  
Vol 5 (2) ◽  
pp. 16
Author(s):  
Kripa Shankar Pathak ◽  
Ravindra Mohan
Keyword(s):  
Renewable Energy ◽  
Thermal Efficiency ◽  
Power Plants ◽  
Waste Heat ◽  
Heating System ◽  
Parabolic Trough ◽  
Parabolic Trough Collector ◽  
History Of ◽  
Solar Powered ◽  
Industrial Heating

The potential of renewable energy should be investigated. Renewable energy is the energy from natural and unnatural available forms including wind, biomass, solar, and waste heat energy generated through various human activities. Solar energy is an available and clean form of renewable energy used as an alternative to fossil fuel in generating energy. However, the maximum extraction of thermal energy from the sun is most challenging. This study focuses on energy generation using the parabolic trough collector (PTC). This review contains geometrical analysis including the thermal approach of the PTC model, heat transfer, and method of enhancing thermal efficiency on the PTC receiver. So to identify the performance analysis, thermal efficiency, and applications of the solar-powered PTC and the history of PTC evolution. The PTC applications include desalination process, air heating system, power plants, refrigeration, and industrial heating purposes.  

scholarly journals Performance Evaluation of Multiple Helical Tubes as a Receiver for Solar Parabolic Trough Collector

2019 ◽  
Vol 6 (2) ◽  
pp. 115-122
Author(s):  
Swapnil N. Lotake ◽  
M. M. Wagh
Keyword(s):  
Mass Flow ◽  
Thermal Efficiency ◽  
Power Plants ◽  
Focal Point ◽  
Thermal Power ◽  
Heat Transfer Fluid ◽  
Parabolic Trough ◽  
Black Paint ◽  
Parabolic Trough Collector ◽  
Helical Tubes

Solar parabolic trough collector consists of a parabolic reflector with a central receiver at a focal point through which heat transfer fluid is passed. Parabolic trough collector is used mostly in solar thermal power plants for generating electricity. This paper describes the experimental results of two straight tubes wrapped over each other to form a helically shaped receiver. The receiver was tested with aluminium material with and without black paint over it. Also, the helical tube receiver was tested with a glass cover over it, at two different mass flow rates and, with and without manual tracking. The tested instantaneous thermal efficiency ranges from 31.26% to 45.28% and the overall thermal efficiency ranges from 14.9% to 31.41% during the experimental period. The instantaneous thermal efficiency increased by an average of 1.32 times for unpainted receiver and 1.36 times for black painted receiver with the increase in mass flow rate. By tracking the parabolic collector according to sun’s position, there is an average increase in instantaneous thermal efficiency by 1.1 times for unpainted receiver and 1.04 times for black painted receiver. The paper further reveals that the use of multiple helical tubes as a receiver for parabolic trough collector increases the overall efficiency of the collector in a substantial manner.

scholarly journals Thermal Performance Comparison of Parabolic Trough Collector (PTC) Using Various Nanofluids

2021 ◽  
Vol 10 (4) ◽  
pp. 875-889
Author(s):  
Ashutosh Shirole ◽  
Mahesh Wagh ◽  
Vivek Kulkarni
Keyword(s):  
Mass Flow Rate ◽  
Mass Flow ◽  
Flow Rate ◽  
Thermal Efficiency ◽  
Power Plants ◽  
Large Scale ◽  
Solar Thermal ◽  
Pumping Power ◽  
Parabolic Trough ◽  
Parabolic Trough Collector

The objective of this paper is to investigate the theoretical performance of Parabolic Trough Collector (PTC) using various nanofluids. The theoretical performances are calculated for Al2O3, graphite, magnetite, SWCNH, CuO, SiO2, MWCNT, TiO2, Fe2O3, and ZnO in water nanofluids. The heat transfer equations, thermodynamic properties of nanofluid and pumping power are utilised for the development of novel thermal model.  The theoretical thermal efficiency of the PTC is calculated, and the economic viability of the technology is predicted for a range of nanofluid concentration. The results showed that the thermal conductivity increases with the concentration of nanoparticles in the base fluid. Magnetite nanofluid showed the highest thermal efficiency, followed by CuO, MWCNT, ZnO, SWCNH, TiO2, Fe2O3, Al2O3, graphite, and SiO2, respectively. The study reveals that MWCNT at 0.4% concentration is the best-suited nanofluid considering thermal gain and pumping power. Most of the nanofluids achieved optimum efficiency at 0.4% concentration. The influence of mass flow rate on thermal efficiency is evaluated. When the mass flow rate increased from 70 Kg/hr to 90Kg/hr, a 10%-20% efficiency increase is observed. Dispersing nanofluids reduces the levelized cost of energy of large-scale power plants. These findings add to the knowledge of the scientific community aimed explicitly at solar thermal energy technology. The report can also be used as a base to pursue solar thermal projects on an economic basis.

scholarly journals The efficiency of steam production by the Parabolic Trough Collector PTC with the use of nanofluids in the region of Ouargla

2021 ◽  
Vol 1204 (1) ◽  
pp. 012005
Author(s):  
Intissar Achouri ◽  
Mouhamed Elbar Soudani ◽  
Tlili Salah
Keyword(s):  
Thermal Efficiency ◽  
Power Plants ◽  
Solar Power ◽  
Production Capacity ◽  
Fluid Temperature ◽  
Concentrated Solar Power ◽  
Parabolic Trough ◽  
Parabolic Trough Collector ◽  
Solar Power Plants ◽  
Concentrated Solar Power Plants

Abstract Concentrated solar power plants (CSP) contribute to global production (at present) with a capacity of 400 MW, and by 2020 they will reach approximately 20 GW, then nearly 800 GW by 2050, This will prevent the emission of 32 million tons of CO2 annually in 2020, and rise to 1.2 billion tons in 2050, according to the International Greenpeace “Solar Thermal Electricity” 2016 report. Among all the concentrated solar power (CSP) technology available to date, Parabolic Trough Collector (PTC) is the most promising, cost-effective, and efficient solution to generating electrical power, as PTC plants contribute in terms of global production capacity by 73.58% of the overall capacity of concentrated solar power plants (CSP). PTC stations in the production of electricity depend on the generation of hot and pressurized steam that rotates the turbines and to increase the effectiveness of PTC in the production of steam, we use in this study nanofluids by adding copper nanomaterials in different proportions to improve the Thermal efficiency of PTC. We also studied the effect of the width of the PTC slot on the fluid temperature. And from it on the amount of steam produced. The results of the study showed that the Thermal efficiency increases with the increase in the ratio of copper nanomaterials in the water, as the temperature of outlet water reaches 98°C, for the ratio of nanomaterials, 20%, in order to water flow 0.01 Kg/s and display the aperture 3.5 m.

scholarly journals Performance Evaluation of Multiple Helical Tubes as a Receiver for Solar Parabolic Trough Collector

2020 ◽  
Vol 7 (1) ◽  
pp. 39-46
Author(s):  
Swapnil N. Lotake ◽  
M. M. Wagh
Keyword(s):  
Mass Flow ◽  
Thermal Efficiency ◽  
Power Plants ◽  
Focal Point ◽  
Thermal Power ◽  
Heat Transfer Fluid ◽  
Parabolic Trough ◽  
Black Paint ◽  
Parabolic Trough Collector ◽  
Helical Tubes

Solar parabolic trough collector consists of a parabolic reflector with a central receiver at a focal point through which heat transfer fluid is passed. Parabolic trough collector is used mostly in solar thermal power plants for generating electricity. This paper describes the experimental results of two straight tubes wrapped over each other to form a helically shaped receiver. The receiver was tested with aluminium material with and without black paint over it. Also, the helical tube receiver was tested with a glass cover over it, at two different mass flow rates and, with and without manual tracking. The tested instantaneous thermal efficiency ranges from 31.26% to 45.28% and the overall thermal efficiency ranges from 14.9% to 31.41% during the experimental period. The instantaneous thermal efficiency increased by an average of 1.32 times for unpainted receiver and 1.36 times for black painted receiver with the increase in mass flow rate. By tracking the parabolic collector according to sun’s position, there is an average increase in instantaneous thermal efficiency by 1.1 times for unpainted receiver and 1.04 times for black painted receiver. The paper further reveals that the use of multiple helical tubes as a receiver for parabolic trough collector increases the overall efficiency of the collector in a substantial manner.

Performance Enhancement of Solar Parabolic Trough Collector Using Intensified Ray Convergence System

2017 ◽  
Vol 867 ◽  
pp. 191-194
Author(s):  
Anbu Manimaran Sukanta ◽  
M. Niranjan Sakthivel ◽  
Gopalsamy Manoranjith ◽  
Loganathan Naveen Kumar
Keyword(s):  
Renewable Energy ◽  
Solar Energy ◽  
Performance Enhancement ◽  
Solar Flux ◽  
Parabolic Trough ◽  
Parabolic Trough Collector ◽  
Chrome Coating ◽  
Convergence System ◽  
And Performance

Solar Energy is one of the forms of Renewable Energy that is available abundantly. This work is executed on the enhancement of the performance of solar parabolic trough collector using Intensified Ray Convergence System (IRCS). This paper distinguishes between the performance of solar parabolic trough collector with continuous dual axis tracking and a fixed solar parabolic trough collector (PTC) facing south (single axis tracking). The simulation and performance of the solar radiations are visualized and analyzed using TRACEPRO 6.0.2 software. The improvement in absorption of solar flux was found to be enhanced by 39.06% in PTC using dual axis tracking, absorption of solar flux increases by 52% to 200% in PTC receiver using perfect mirror than PTC using black chrome coating.

Power Cycles of Generation III and III+ Nuclear Power Plants

2014 ◽  
Author(s):  
Alexey Dragunov ◽  
Eugene Saltanov ◽  
Igor Pioro ◽  
Pavel Kirillov ◽  
Romney Duffey
Keyword(s):  
Renewable Energy ◽  
Natural Gas ◽  
Thermal Efficiency ◽  
Nuclear Power ◽  
Power Plants ◽  
Renewable Energy Sources ◽  
Thermal Power ◽  
Electrical Energy ◽  
Energy Sources ◽  
Thermal Power Plants

It is well known that the electrical-power generation is the key factor for advances in any other industries, agriculture and level of living. In general, electrical energy can be generated by: 1) non-renewable-energy sources such as coal, natural gas, oil, and nuclear; and 2) renewable-energy sources such as hydro, wind, solar, biomass, geothermal and marine. However, the main sources for electrical-energy generation are: 1) thermal - primary coal and secondary natural gas; 2) “large” hydro and 3) nuclear. The rest of the energy sources might have visible impact just in some countries. Modern advanced thermal power plants have reached very high thermal efficiencies (55–62%). In spite of that they are still the largest emitters of carbon dioxide into atmosphere. Due to that, reliable non-fossil-fuel energy generation, such as nuclear power, becomes more and more attractive. However, current Nuclear Power Plants (NPPs) are way behind by thermal efficiency (30–42%) compared to that of advanced thermal power plants. Therefore, it is important to consider various ways to enhance thermal efficiency of NPPs. The paper presents comparison of thermodynamic cycles and layouts of modern NPPs and discusses ways to improve their thermal efficiencies.

Annual Yield Analysis of Solar Tower Power Plants With GREENIUS

2011 ◽  
Vol 133 (3) ◽  
Author(s):  
Jürgen Dersch ◽  
Peter Schwarzbözl ◽  
Timo Richert
Keyword(s):  
Renewable Energy ◽  
Power Plants ◽  
Software Tool ◽  
Parabolic Trough ◽  
Concentrating Solar Power ◽  
Solar Field ◽  
Performance Calculation ◽  
Design Power ◽  
Energy Plants ◽  
Renewable Energy Plants

An existing software tool for annual performance calculation of concentrating solar power and other renewable energy plants has been extended to enable the simulation of solar tower power plants. The methodology used is shown and a demonstrative example of a 50 MWe tower plant in southern Spain is given. The influence of design power and latitude on solar field layout is discussed. Furthermore, a comparison of the tower plant with a 50 MWe parabolic trough and a Linear Fresnel plant at the same site is given.

scholarly journals Enabling thermal efficiency improvement and waste heat recovery using liquid air harnessed from offshore renewable energy sources

2020 ◽  
Vol 275 ◽  
pp. 115351 ◽  
Author(s):  
Julian D. Osorio ◽  
Mayank Panwar ◽  
Alejandro Rivera-Alvarez ◽  
Chrys Chryssostomidis ◽  
Rob Hovsapian ◽  
...  
Keyword(s):  
Renewable Energy ◽  
Thermal Efficiency ◽  
Heat Recovery ◽  
Waste Heat Recovery ◽  
Waste Heat ◽  
Renewable Energy Sources ◽  
Energy Sources ◽  
Efficiency Improvement
Sign in / Sign up

Export Citation Format

Share Document