scholarly journals Design Factors in Concentrating Solar Power Plants for Industrial Steam Generation

2021 ◽  
Vol 19 ◽  
pp. 624-629
Author(s):  
M.T. Miranda ◽  
◽  
D. Larra ◽  
I. Montero ◽  
F.J. Sepúlveda ◽  
...  
Keyword(s):  
Power Plants ◽  
Energy Sources ◽  
Plant Design ◽  
Steam Generation ◽  
Advantages And Disadvantages ◽  
Concentrated Solar Energy ◽  
Solar Plant ◽  
Solar Power Plants ◽  
Design Factors ◽  
Steam Production

The importance of energy consumption for industrial steam generation justifies the need to promote new renewable and environmentally friendly energy sources, such as concentrated solar energy, for its integration in this sector. In this work, the different alternatives currently available and their advantages and disadvantages are discussed, as well as the main parameters that influence the design of solar installations for industrial steam production. Besides, a guidance procedure is proposed and applied to a real solar plant design.

A Review on Experimental and Numerical Investigations on Using Nanofluid in Volumetric Solar Energy Collectors

2014 ◽  
Author(s):  
Siamak Mirmasoumi ◽  
Mohammad Pourgol-Mohammad
Keyword(s):  
Heat Transfer ◽  
Power Plants ◽  
Radiant Energy ◽  
Solar Thermal ◽  
Working Fluid ◽  
Steam Generation ◽  
Solar Thermal Energy ◽  
Solar Absorption ◽  
Advantages And Disadvantages ◽  
Solar Power Plants

By a simple research in the scholarly articles, it can be realized that the tendency to using solar thermal energy has risen in the recent years due to its many reasonable advantages. In conventional solar thermal systems, HTFs (Heat Transfer Fluids) are pumped through the piping of a solar collector and after absorbing the solar radiant energy conveys it to water to make steam. No need to say that this method contains some losses via all methods of heat transfer. To solve this problem, researchers have shown that with direct steam generation, in which working fluid directly absorbs solar thermal and becomes vapor, solar power plants have the potential to be more productive. However, the aforesaid conventional HTFs don’t have efficient enough thermal properties and need to be improved. For this reason using nanofluid has become to some extent popular in heat transfer facilities like solar thermal collectors. In the present study, we are going to identify the advantages and disadvantages of using nanoparticles in direct solar absorption systems (DSASs). To achieve this, a general review on the experimental and numerical studies in this field is done. Additionally some of the most effective particles for such a special case, in which particles should have good radiative characteristics, are introduced. Finally, after discussion about the highlighted challenges of using nanofluids in DSASs, some helpful suggestions to overcome these problems will be presented.

WIND-DIESEL INSTALLATIONS FOR ISOLATED FAR NORTH AREAS

2020 ◽  
Author(s):  
Александр Григорьевич Комков ◽  
Александр Константинович Сокольский
Keyword(s):  
Energy Supply ◽  
Alternative Energy ◽  
Power Plants ◽  
Renewable Energy Sources ◽  
Energy Sources ◽  
Economic Potential ◽  
Far North ◽  
Alternative Energy Sources ◽  
Current State ◽  
Solar Power Plants

В статье рассмотрено современное состояние энергоснабжения и перспективы развития альтернативных источников энергии на территории Крайнего Севера. Отмечено, что несмотря на острую потребность во внедрении возобновляемых источников энергии, установленные мощности всех ветряных и солнечных электростанций в регионе не превышают 7-8 МВт. Также в работе рассчитаны технический и экономический потенциал ветровой энергии региона, на основании которых подобрана наиболее эффективная установка. The article discusses the current state of energy supply and the prospects for the development of alternative energy sources in the Far North. It is noted that despite the urgent need for the introduction of renewable energy sources, the installed capacities of all wind and solar power plants in the region do not exceed 7-8 MW. Also, the technical and economic potential of the region’s wind energy was calculated based on which the most efficient installation was selected.

scholarly journals MODELING OF COMPATIBLE WORK OF DISTRIBUTED POWER SOURCES OF ELECTRIC POWER AND CENTRALISED POWER SUPPLY

2018 ◽  
pp. 189-195
Author(s):  
Petro Lezhnyuk ◽  
Iryna Hunko ◽  
Juliya Malogulko ◽  
Iryna Kotylko ◽  
Lіudmyla Krot
Keyword(s):  
Power Supply ◽  
Power Plants ◽  
Solar Power ◽  
Energy Sources ◽  
Hydroelectric Power Station ◽  
Hydroelectric Power ◽  
Distributed Energy ◽  
Power Stations ◽  
Asynchronous Generator ◽  
Solar Power Plants

Urgency of the research. Current trends of distributed generation development in Ukraine indicate a rapid generation in-crease from renewable energy plants. Most developed countries gradually refuse from the fossil fuels use and invest more and more to the “green” energy. Therefore, there is a need for a detailed study of the operation conditions of distributed energy sources due to their instability, as well as the processes that arise in distribution electric networks with diverse types of distributed energy sources. Target setting. In the producing process of power energy by distributed energy sources due to the increase in their num-ber, there are situations where several renewable sources of energy operate to only one system of buses. Thus, such distributive networks acquire the features of a local power system, which complicates the control process of such systems, and also there is a problem with the electricity supply of consumers. Actual scientific researches and issues analysis. The analysis of publications suggests that in literature more attention is paid to studying the operating modes of solar power plants, or small hydroelectric power plants. However, almost no attention was paid to the study of their cooperation work. Uninvestigated parts of general matters defining. Only a few works are devoted to the study of the cooperation of the diverce sources of distributed energy sources in the local electrical systems. That is why, their impact on power distribution networks and on the grid in general has not been studied extensively. The research objective. In this article was considered the influence of asynchronous generators on small hydroelectric power plants on the operation modes of distribution electrical networks, and were investigated the processes that are occurring in local power systems with different types of distributed energy sources. The statement of basic materials. Based on the research results, was developed a computer model of a such system in the PS CAD software environment. Two solar stations and one small hydroelectric power station with an asynchronous generator were connected to the power supply. It was shown the simulation of two modes of operation: a joint operation of a small hydroelectric power station, two solar power stations and a power supply center; a joint operation of a small hydroelectric pow-er plant, two solar power stations and a power supply disconnected. Conclusions. As a result of computer simulation, it is shown that by switching on a small hydroelectric power plant with an asynchronous generator in the case of an emergency shutdown of centralized power supply, it is possible to restore the work of solar power plants, and thus partially or completely restore the power supply of consumers.

A Comparative Study on a Built Sun Tracker and Fixed Converter Panels

2012 ◽  
Vol 1 (4) ◽  
pp. 56-69
Author(s):  
Farzin Shama ◽  
Gholam Hossein Roshani ◽  
Sobhan Roshani ◽  
Arash Ahmadi ◽  
Saber Karami
Keyword(s):  
Renewable Energy ◽  
Power Plants ◽  
Large Scale ◽  
Human Society ◽  
Renewable Energy Resources ◽  
Advantages And Disadvantages ◽  
Production And Consumption ◽  
Solar Power Plants ◽  
And Performance ◽  
Optimization And Performance

Producing non-polluting renewable energy in large scale is essential for sustainability of future developments in industry and human society. Among renewable energy resources, solar energy takes a special place because of its free accessibility and affordability. However, the optimization of its production and consumption processes poses important concerns, essentially in the affordability issue. This paper investigates several optimization and performance issues regarding solar panel converters using two-axis controlled solar tracer that has been practically implemented in comparison with fixed converter panels. Results shown in tables and graphs demonstrate clearly the advantages and disadvantages of the methods. Based on these results, large scale solar power plants are being suggested to be equipped with similar devices.

Thermoeconomic Study of a Small Parabolic Trough Solar Plant

2010 ◽  
Author(s):  
M. D. Duran ◽  
E. A. Rinco´n ◽  
M. Sa´nchez
Keyword(s):  
Power Plant ◽  
Optimization Model ◽  
Power Plants ◽  
Optimization Problem ◽  
Pressure Level ◽  
Combined Cycle ◽  
Design Parameters ◽  
Parabolic Trough ◽  
Solar Plant ◽  
Solar Power Plants

This work describes the thermoeconomic study of an integrated combined cycle parabolic trough power plant. The parabolic trough plant will economize boiler activity, and thus the thermoeconomic optimization of the configuration of the boiler, including the parabolic trough plant, will be achieved. The objective is to obtain the optimum design parameters for the boiler and the size of the parabolic field. The proposal is to apply the methodology employed by Duran [1] and Valde´s et. al. [2], but with the inclusion of the parabolic trough plant into the optimization problem. It is important to point out that the optimization model be applied to a single pressure level configuration. For future works, it is proposed that the same model be applied to different configurations of integrated combined cycle solar power plants. As a result the optimum thermoeconomic design will be obtained for a parabolic trough plant used to economize the HRSG.

Operation of Large-Scale Pumps and Valves in Molten Salt

1994 ◽  
Vol 116 (3) ◽  
pp. 137-141 ◽  
Author(s):  
D. C. Smith ◽  
E. E. Rush ◽  
C. W. Matthews ◽  
J. M. Chavez ◽  
P. A. Bator
Keyword(s):  
Molten Salt ◽  
Power Plants ◽  
Large Scale ◽  
Solar Power ◽  
Test Facility ◽  
Plant Design ◽  
Thermal Test ◽  
Central Receiver ◽  
Solar Power Plants ◽  
Careful Design

The molten salt pump and valve (P&V) test loops at Sandia National Laboratories (SNL) National Solar Thermal Test Facility (NSTTF) operated between Jan. 1988 and Oct. 1990. The purpose of the P&V test was to demonstrate the performance, reliability, and service life of full-scale hot and cold salt pumps and valves for use in commercial central receiver solar power plants. The P&V test hardware consists of two pumped loops; the “Hot Loop” to simulate the hot (565°C) side of the receiver and the “Cold Loop” to simulate the receiver’s cold (285°C) side. Each loop contains a pump and five valves sized to be representative of a conceptual 60-MWe commercial solar power plant design. The hot loop accumulated over 6700 hours of operation and the cold loop over 2500 hours of operation. This project has demonstrated that standard commercial scale pump and valve designs will work in molten salt. The test also exposed some pitfalls that must be avoided in specifying such equipment. Although certainly not all of the pitfalls were discovered, careful design and specification should result in reliable or at least workable equipment.

Model and control scheme for recirculation mode direct steam generation parabolic trough solar power plants

2017 ◽  
Vol 202 ◽  
pp. 700-714 ◽  
Author(s):  
Su Guo ◽  
Deyou Liu ◽  
Xingying Chen ◽  
Yinghao Chu ◽  
Chang Xu ◽  
...  
Keyword(s):  
Power Plants ◽  
Solar Power ◽  
Steam Generation ◽  
Parabolic Trough ◽  
Control Scheme ◽  
Direct Steam ◽  
Solar Power Plants ◽  
And Control

scholarly journals Pumped Storage Power Plants: The Treasure of Renewable Energy Sector in India

2021 ◽  
Vol 12 (3) ◽  
pp. 4671-4675
Author(s):  
N.Subhashini Et.al
Keyword(s):  
Renewable Energy ◽  
Power Plant ◽  
Power Plants ◽  
Energy Sector ◽  
Energy Sources ◽  
Power Sector ◽  
Advantages And Disadvantages ◽  
The World ◽  
Entire Nation ◽  
Pumped Storage

Renewable Energy has become an inevitable one in the world of power sector. Especially country like India (the second largest populated) powering the entire nation is not an easy thing. Typically we depend upon conventional energy sources which is to be dissipate at any point of time. Therefore now we are returning back to the pavilion, started using non conventional energy sources like our ancestors. Unlike conventional sources, the nonconventional sources are profuse in nature. These sources will be even more effective when coordination comes into picture. Mostly coordination will be done with wind and solar predominantly. In this paper, we are to reveal about the hidden treasure, the pumped storage power plant (PSP) its advantages and disadvantages.

scholarly journals Optimal Solar Plant Site Identification Using GIS and Remote Sensing: Framework and Case Study

Energies ◽  
2022 ◽  
Vol 15 (1) ◽  
pp. 312
Author(s):  
Abdulaziz Alhammad ◽  
Qian (Chayn) Sun ◽  
Yaguang Tao
Keyword(s):  
Solar Energy ◽  
Alternative Energy ◽  
Power Plants ◽  
Solar Power ◽  
Electricity Production ◽  
Solar Plant ◽  
Plant Site ◽  
Solar Power Plants ◽  
Total Study Area ◽  
Site Identification

Many countries have set a goal for a carbon neutral future, and the adoption of solar energy as an alternative energy source to fossil fuel is one of the major measures planned. Yet not all locations are equally suitable for solar energy generation. This is due to uneven solar radiation distribution as well as various environmental factors. A number of studies in the literature have used multicriteria decision analysis (MCDA) to determine the most suitable places to build solar power plants. To the best of our knowledge, no study has addressed the subject of optimal solar plant site identification for the Al-Qassim region, although developing renewable energy in Saudi Arabia has been put on the agenda. This paper developed a spatial MCDA framework catering to the characteristics of the Al-Qassim region. The framework adopts several tools used in Geographic Information Systems (GIS), such as Random Forest (RF) raster classification and model builder. The framework aims to ascertain the ideal sites for solar power plants in the Al-Qassim region in terms of the amount of potential photovoltaic electricity production (PVOUT) that could be produced from solar energy. For that, a combination of GIS and Analytical Hierarchy Process (AHP) techniques were employed to determine five sub-criteria weights (Slope, Global Horizontal Irradiance (GHI), proximity to roads, proximity to residential areas, proximity to powerlines) before performing spatial MCDA. The result showed that ‘the most suitable’ and ‘suitable’ areas for the establishment of solar plants are in the south and southwest of the region, representing about 17.53% of the study area. The ‘unsuitable’ areas account for about 10.17% of the total study area, which is mainly concentrated in the northern part. The rest of the region is further classified into ‘moderate’ and ‘restricted’ areas, which account for 46.42% and 25.88%, respectively. The most suitable area for potential solar energy, yields approximately 1905 Kwh/Kwp in terms of PVOUT. The proposed framework also has the potential to be applied to other regions nationally and internationally. This work contributes a reproducible GIS workflow for a low-cost but accurate adoption of a solar energy plan to achieve sustainable development goals.

S-Ethane Brayton Power Conversion Systems for Concentrated Solar Power Plant

2015 ◽  
Vol 138 (1) ◽  
Author(s):  
Luis Coco Enríquez ◽  
Javier Muñoz-Antón ◽  
José María Martínez-Val Peñalosa
Keyword(s):  
Power Plants ◽  
Solar Power ◽  
Subcritical Water ◽  
Plant Performance ◽  
Solar Collectors ◽  
Steam Generation ◽  
Concentrated Solar Power ◽  
Power Cycles ◽  
Solar Power Plants ◽  
Recompression Cycle

The objective of this investigation is the comparison between supercritical ethane (s-ethane, C2H6) and supercritical carbon dioxide (s-CO2) Brayton power cycles for line-focusing concentrated solar power plants (CSP). In this study, CSP are analyzed with linear solar collectors (parabolic trough (PTC) or linear Fresnel (LF)), direct molten salt (MS), or direct steam generation (DSG) as heat transfer fluids (HTF), and four supercritical Brayton power cycles configurations: simple Brayton cycle (SB), recompression cycle (RC), partial cooling with recompression cycle (PCRC), and recompression with main compression intercooling cycle (RCMCI). All Brayton power cycles were assessed with two working fluids: s-CO2 and s-ethane. As a main result, we confirmed that s-ethane Brayton power cycles provide better net plant performance than s-CO2 cycles for turbine inlet temperatures (TITs) from 300 °C to 550 °C. As an example, the s-ethane RCMCI plant configuration net efficiency is ∼42.11% for TIT = 400 °C, and with s-CO2 the plant performance is ∼40%. The CSP Brayton power plants were also compared with another state-of-the-art CSP with DSG in linear solar collectors and a subcritical water Rankine power cycle with direct reheating (DRH), and a maximum plant performance between ∼40% and 41% (TIT = 550 °C).

Sign in / Sign up

Export Citation Format

Share Document