scholarly journals Comparison of Chilled ceiling and Mixing ventilation assisted by intermittent personalized ventilation: Thermal comfort and Energy savings

2020 ◽  
Vol 18 ◽  
pp. 431-436
Author(s):  
D. Al Assaad ◽  
◽  
K. Ghali ◽  
N. Ghaddar
Keyword(s):  
Thermal Comfort ◽  
Energy Savings ◽  
Personalized Ventilation ◽  
Chilled Ceiling

Effective Mixed-Mode Ventilation System With Intermittent Personalized Ventilation for Improving Thermal Comfort in an Office Space

2020 ◽  
Author(s):  
Elvire Katramiz ◽  
Nesreen Ghaddar ◽  
Kamel Ghali
Keyword(s):  
Thermal Comfort ◽  
Control Strategy ◽  
Mixed Mode ◽  
Natural Ventilation ◽  
Energy Savings ◽  
Ventilation System ◽  
Energy Performance ◽  
Building Performance Simulation ◽  
Office Space ◽  
Personalized Ventilation

Abstract The mixed-mode ventilation (MMV) system is an energy-friendly ventilation technique that combines natural ventilation (NV) with mechanical air conditioning (AC). It draws in fresh air when the outdoor conditions are favorable or activates otherwise the AC system during occupancy hours. To improve performance of the MMV system, it is proposed to integrate it with an intermittent personalized ventilation (IPV) system. IPV delivers cool clean air intermittently to the occupant and enhances occupant thermal comfort. With the proper ventilation control strategy, IPV can aid MMV by increasing NV mode operational hours, and improve the energy performance of the AC system by relaxing the required macroclimate set point temperature. The aim of this work is to study the IPV+MMV system performance for an office space application in terms of thermal comfort and energy savings through the implementation of an appropriate control strategy. A validated computational fluid dynamics (CFD) model of an office space equipped with IPV is used to assess the thermal fields in the vicinity of an occupant. It is then coupled with a transient bio-heat and comfort models to find the overall thermal comfort levels. Subsequently, a building-performance simulation study is performed using Integrated Environmental Solutions-Virtual Environment (IES-VE) for an office in Beirut, Lebanon for the typical summer month of July. An energy analysis is conducted to predict the savings of the suggested design in comparison to the conventional AC system. Results showed that the use of IPV units and MMV significantly reduced the number of AC operation hours while providing thermal comfort.

Reducing Energy Demand in Commercial Buildings: Balancing Convection and Radiant Cooling

2010 ◽  
Author(s):  
Lee Chusak ◽  
Andrew Harris ◽  
Ramesh Agarwal
Keyword(s):  
Thermal Comfort ◽  
Energy Demand ◽  
Energy Savings ◽  
Ventilation System ◽  
Computational Domain ◽  
Exterior Wall ◽  
Displacement Ventilation ◽  
Comfort Levels ◽  
Isothermal Wall ◽  
Chilled Ceiling

Using Computational Fluid Dynamics (CFD) software, three different cooling systems used in contemporary office environments are modeled to compare energy consumption and thermal comfort levels. Incorporating convection and radiation technologies, full-scale models of an office room compare arrangements for (a) an all-air overhead system (mixing ventilation), (b) an all-air raised floor system (displacement ventilation), and (c) a combined air and hydronic radiant system (displacement ventilation with a chilled ceiling). The computational domain for each model consists of one isothermal wall (simulating an exterior wall of the room) and adiabatic conditions for the remaining walls, floor, and ceiling (simulating interior walls of the room). Two sets of computations were conducted. The first set of computations utilized a constant temperature isothermal exterior wall, while the second set utilized an isothermal wall that changed temperatures as a function of time simulating the temperature changes on the exterior wall of a building throughout a 24 hour period. Results show superior thermal comfort levels as well as substantial energy savings can be accrued using the displacement ventilation, especially the displacement ventilation with a chilled ceiling over the conventional mixing ventilation system.

Thermal Comfort and Energy Savings in a Simulated Office Conditioned by a Transient Personalized Ventilator and a Displacement Ventilation System

2020 ◽  
Author(s):  
Douaa Al Assad ◽  
Kamel Ghali ◽  
Nesreen Ghaddar ◽  
Elvire Katramiz
Keyword(s):  
Thermal Comfort ◽  
Energy Savings ◽  
Ventilation System ◽  
Rate Of Change ◽  
Comfort Level ◽  
Thermal Manikin ◽  
Cfd Model ◽  
Displacement Ventilation ◽  
Additional Energy ◽  
Personalized Ventilation

Abstract The aim of this work is to evaluate the performance of an intermittent personalized ventilation (IPV) system assisting a displacement ventilation (DV) system to improve thermal comfort and save energy. This will be conducted by developing a transient 3D computational fluid dynamics (CFD) model of an occupied office space equipped with systems. The occupant is modeled by a heated thermal manikin replicating the human body. The CFD model is coupled with a transient bio-heat model to compute segmental skin temperatures and their rate of change. The latter are taken as input into Zhang’s comfort model to predict and overall thermal comfort. The model was used to conduct a case study, where the overall thermal comfort and energy savings will be assessed for the IPV + DV These results will be compared with those of steady personalized ventilation (PV) + DV and standalone DV systems. By varying the IPV frequency in the typical indoor range of [0.3 Hz – 1 Hz], it was found that the IPV + DV system was able to enhance comfort compared to steady PV + DV and a standalone DV. In addition, an energy analysis was conducted and it was shown that the IPV was able to achieve considerable energy savings compared to a steady PV + DV at the same thermal comfort level. Moreover, relaxing the DV supply temperature to higher occupied zone temperatures, can provide additional energy savings while still maintaining comfort levels in the space.

scholarly journals Impacts on Indoor Thermal Comfort and Heating Energy Use in Hellenic Dwellings from Occupant Behavioral Reactions

2021 ◽  
Vol 11 (14) ◽  
pp. 6254
Author(s):  
Elena G. Dascalaki ◽  
Constantinos A. Balaras
Keyword(s):  
Thermal Comfort ◽  
Energy Use ◽  
Energy Savings ◽  
Local Heating ◽  
Economic Recession ◽  
Heating System ◽  
Building Stock ◽  
Heating Systems ◽  
Indoor Thermal Comfort ◽  
Energy Audits

In an effort to reduce the operational cost of their dwellings, occupants may even have to sacrifice their indoor thermal comfort conditions. Following the economic recession in Greece over recent years, homeowners have been forced to adapt their practices by shortening heating hours, lowering the indoor thermostat settings, isolating spaces that are not heated or even turning off their central heating system and using alternative local heating systems. This paper presents the results from over 100 occupant surveys using questionnaires and walk-through energy audits in Hellenic households that documented how occupants operated the heating systems in their dwellings and the resulting indoor thermal comfort conditions and actual energy use. The results indicate that the perceived winter thermal comfort conditions were satisfactory in only half of the dwellings, since the actual operating space heating periods averaged only 5 h (compared with the assumed 18 h in standard conditions), while less than half heated their entire dwellings and only a fifth maintained an indoor setpoint temperature of 20 °C, corresponding to standard comfort conditions. Mainstream energy conservation measures include system maintenance, switching to more efficient systems, reducing heat losses and installing controls. This information is then used to derive empirical adaptation factors for bridging the gap between the calculated and actual energy use, making more realistic estimates of the expected energy savings following building renovations, setting prudent targets for energy efficiency and developing effective plans toward a decarbonized building stock.

scholarly journals Field Study Of A Radiant Heating System For Sleep Thermal Comfort And Potential Energy Saving

2021 ◽  
Author(s):  
Christopher L. K. Wang
Keyword(s):  
Potential Energy ◽  
Thermal Comfort ◽  
Energy Saving ◽  
Energy Savings ◽  
Thermal Environment ◽  
Residential Buildings ◽  
Thermal Conditions ◽  
Heating System ◽  
The Body ◽  
Radiant Temperature

As sleep is unconscious, the traditional definition of thermal comfort with conscious judgment does not apply. In this thesis sleep thermal comfort is defined as the thermal condition which enables sleep to most efficiently rejuvenate the body and mind. A comfort model was developed to stimulate the respective thermal environment required to achieve the desired body thermal conditions and a new infrared sphere method was developed to measure mean radiant temperature. Existing heating conditions according to building code conditions during sleeping hours was calculated to likely overheat a sleeping person and allowed energy saving potential by reducing nighttime heating set points. Experimenting with existing radiantly and forced air heated residential buildings, it was confirmed that thermal environment was too hot for comfortable sleep and that the infrared sphere method shows promise. With the site data, potential energy savings were calculated and around 10% of energy consumption reduction may be achieved during peak heating.

Sign in / Sign up

Export Citation Format

Share Document