scholarly journals Carbonation Effect on the Chloride Profile

2020 ◽  
Author(s):  
C. Andrade
Keyword(s):  
Chloride Profile

scholarly journals Effect of the Electric Field on the Distribution Law of Chloride Ions and Microstructure in Concrete with the Addition of Mineral Admixtures

Materials ◽  
2019 ◽  
Vol 12 (9) ◽  
pp. 1380 ◽  
Author(s):  
Xiaoli Xie ◽  
Qingge Feng ◽  
Zheng Chen ◽  
Wei Lu
Keyword(s):  
Electric Field ◽  
Pore Structure ◽  
Chloride Ions ◽  
Mineral Admixtures ◽  
Chloride Diffusion ◽  
Electric Field Effect ◽  
Nacl Solution ◽  
Distribution Law ◽  
Chloride Migration ◽  
Chloride Profile

Migration testing of chloride under an electric field is a fast and effective method to determine the corrosion resistance of reinforced concrete against chloride. In this study, a series of admixture-involved (fly ash and slag) concrete specimens were produced for an accelerating chloride diffusion test in 3% NaCl solution under an electric field and natural chloride diffusion in 165 g/L NaCl solution under immersion conditions. Then, the chloride profile and pore structure of concretes aged 56 and 91 days were compared to investigate the effect of the electric field on chloride diffusion as well as the microstructure of the concrete. The results showed that, under accelerating electric field conditions, the degree to which chloride refined the internal pore structure of the concrete was weaker than that under natural immersion conditions. The applied electric field changed the pore structure inside the concrete, but it had little effect on the distribution of total, free, and bound chlorides and their mutual relationship. In addition, it is necessary to consider that the electric field effect on chloride migration varies with the concrete mix proportions.

Nanoparticle Injection into Concrete Using Electromigration

2014 ◽  
Vol 1054 ◽  
pp. 6-10 ◽  
Author(s):  
Jiří Němeček ◽  
Yun Ping Xi
Keyword(s):  
Reinforced Concrete ◽  
Electric Field ◽  
Concrete Structures ◽  
Chloride Penetration ◽  
Reinforced Concrete Structures ◽  
Testing Chamber ◽  
Chloride Profile ◽  
Nanosilica Particles ◽  
Penetration Tests ◽  
Small Voltage

This paper aims at investigation of possibilities and effectiveness of chloride extraction from concrete and nanoparticle injection into existing reinforced concrete structures by means of electromigration technique. Concrete specimens are exposed to accelerated chloride penetration tests in order to simulate a natural chloride exposure. The developed chloride profile is removed by electroextraction by reversing the polarity in the testing chamber. In a similar manner, concrete specimens are injected with different concentrations of colloidal nanosilica particles. It was shown in the paper that chlorides can be effectively extracted from the concrete using small voltage lasting for several days. Higher concentration solutions of nanosilica can also be effectively transported into concrete via the electric field. Once injected nanosilica can act as microstructure densifier and further reduce chloride penetration as demonstrated by decreased diffusivity of the treated concrete.

scholarly journals Instant performance verification after electrochemical chloride extraction by enhanced corrosion testing

2019 ◽  
Vol 289 ◽  
pp. 03009
Author(s):  
Ulrich Schneck
Keyword(s):  
Treatment Time ◽  
Performance Testing ◽  
Chloride Content ◽  
Corrosion Current ◽  
Concrete Cover ◽  
Chloride Ingress ◽  
Corrosion Activity ◽  
Multi Stage ◽  
Chloride Profile ◽  
Electrochemical Chloride Extraction

Electrochemical chloride extraction (ECE) is meant to re-establish the corrosion protection of concrete for the embedded reinforcement by removing chloride non-destructively and by enhancing the alkalinity of the rebar surrounding concrete. Both effects depend on various parameters, such as concrete cover, rebar spacing, chloride profile (especially if chloride ingress is deeper than the outside rebar layer) and concrete permeability. Often these parameters require long or multi-stage treatments, which basically can achieve any desired target level of chloride profile and impressed charge, but become a costly solution after a while. The acceptance criteria mentioned in CEN TS 14038-2 clause 8.6 refer to the achieved chloride content and to the amount of impressed charge, which are the conventional, easy measurable, but not direct parameters for evaluating the corrosion activity. A third parameter – the re-measurement of potentials for assessing (intended) low potential gradients and more positive average potentials – requires some weeks to months of depolarization and evaporation of water, before such a measurement can be applied successfully. A promising approach for an instant performance testing after an ECE treatment has been made on several occasions with follow-up measurements of electrolyte resistance, polarization resistance and corrosion current. Convincing changes towards significantly lower corrosion activity could be obtained (and compared to known classified values) – regardless of sometimes high residual chloride and very wet concrete. These data could be verified when re-assessed after some weeks, so enhanced corrosion measurements seem to be a useful tool for either establishing that the designed treatment time has been sufficient or to check on possible earlier termination of the treatment during a running ECE.

Estimation of rainfall inputs and direct recharge to the deep unsaturated zone of southern Niger using the chloride profile method

1997 ◽  
Vol 188-189 ◽  
pp. 139-154 ◽  
Author(s):  
J. Bromley ◽  
W.M. Edmunds ◽  
E. Fellman ◽  
J. Brouwer ◽  
S.R. Gaze ◽  
...  
Keyword(s):  
Unsaturated Zone ◽  
Profile Method ◽  
Chloride Profile

Analysis of Service Life of Surface Coated-Concrete Structures Considering Climate Change and Chloride Ingress

2020 ◽  
Vol 842 ◽  
pp. 299-305
Author(s):  
Xiao Yong Wang
Keyword(s):  
Climate Change ◽  
Service Life ◽  
Surface Coating ◽  
Concrete Structures ◽  
Parameter Analysis ◽  
Chloride Ingress ◽  
Arrhenius Law ◽  
Chloride Diffusivity ◽  
Chloride Profile ◽  
Marine Concrete

Mortar surface coating is widely used as a finishing material to extend the service life and improve chloride ingression resistance of marine concrete structures. This study proposes a model for estimating the service life of surface-coated marine concrete considering climate change. First, the increase of chloride diffusivity due to climate change is considered using Arrhenius’ law. A two-layered chloride ingress model is used to analyze chloride profile. The probability-based approach is used to find the service life of concrete structures. Second, parameter analysis is performed considering the effects of various factors on service life. The influences of thickness and chloride diffusivity of the coating and substrate concrete on service life are highlighted. The reduction of service life due to climate change is clarified based on the regression of results of parameter analysis. For marine concrete with 50 years’ service life, 6% service life reduction occurs because of climate change.

Chloride transport through unsaturated concrete: chloride profile simulations and experimental validation

2012 ◽  
Vol 64 (4) ◽  
pp. 351-359 ◽  
Author(s):  
Hassan Sleiman ◽  
Ouali Amiri ◽  
Abdelkarim Ait-Mokhtar ◽  
Jean-Michel Loche
Keyword(s):  
Experimental Validation ◽  
Chloride Transport ◽  
Chloride Profile
Sign in / Sign up

Export Citation Format

Share Document