scholarly journals Detection Sensitivity of Iron-Foil Corrosion Sensor in Simulated Concrete Solution

2020 ◽  
Author(s):  
A. Eriguchi ◽  
H. Fujiwara ◽  
H. Itaya ◽  
T. Wakabayashi ◽  
S. Otani ◽  
...  
Keyword(s):  
Detection Sensitivity ◽  
Iron Foil ◽  
Corrosion Sensor ◽  
Concrete Solution

Applications of SIMS to electronic materials and devices

1992 ◽  
Vol 50 (2) ◽  
pp. 1682-1683
Author(s):  
S.F. Corcoran
Keyword(s):  
Depth Distribution ◽  
Secondary Ion Mass Spectrometry ◽  
Semiconductor Device ◽  
Electronic Materials ◽  
Profile Analysis ◽  
Semiconductor Industry ◽  
Small Diameter ◽  
Depth Resolution ◽  
Detection Sensitivity

Over the past decade secondary ion mass spectrometry (SIMS) has played an increasingly important role in the characterization of electronic materials and devices. The ability of SIMS to provide part per million detection sensitivity for most elements while maintaining excellent depth resolution has made this technique indispensable in the semiconductor industry. Today SIMS is used extensively in the characterization of dopant profiles, thin film analysis, and trace analysis in bulk materials. The SIMS technique also lends itself to 2-D and 3-D imaging via either the use of stigmatic ion optics or small diameter primary beams.By far the most common application of SIMS is the determination of the depth distribution of dopants (B, As, P) intentionally introduced into semiconductor materials via ion implantation or epitaxial growth. Such measurements are critical since the dopant concentration and depth distribution can seriously affect the performance of a semiconductor device. In a typical depth profile analysis, keV ion sputtering is used to remove successive layers the sample.

Analisis Kesenjangan Pelaksanaan Standar Proses pada Pembelajaran Produktif di SMK

2017 ◽  
Vol 2 (1) ◽  
Author(s):  
Atika Atika ◽  
I Made Sudana ◽  
Basyirun Basyirun
Keyword(s):  
Learning Process ◽  
Lesson Plan ◽  
Lesson Plans ◽  
Ministry Of Education ◽  
Standard Process ◽  
Basic Principles ◽  
Discrepancy Rate ◽  
Quantitative Descriptive ◽  
Concrete Solution ◽  
Evaluation Of Learning

Tujuan penelitian, diantaranya menguraikan bagaimana pelaksanaan standar proses, menganalisis seberapa tingkat kesenjangannya dan merancang bagaimana solusi permasalahan terkait kesenjangan pelaksanan standar proses. Penelitian ini menggunakan penelitian deskriptif dengan pendekatan kuantitatif. Aspek dalam penelitian ini adalah (a) perencanaan pembelajaran; (b) pelaksanaan pembelajaran; (c) penilaian hasil belajar; (d) pengawasan oleh kepala sekolah. Teknik pengumpulaan data, yang digunakan adalah metode observasi, wawancara dan dokumentasi. Hasil Penelitian menunjukkan bahwa dalam hal perencanaan pembelajaran diperoleh kriteria tidak senjang, artinya pada kegiatan perencanaan tidak banyak guru yang mengabaikan standar yang ditetapkan oleh Permendikbud No. 65 tahun 2013. Hasil analisis pelaksanaan pembelajaran diperoleh kriteria cukup senjang, artinya standar proses yang ditetapkan belum sepenuhnya dilaksanakan. Hasil analisis menunjukkan bahwa pada kegiatan penilaian masih diperoleh hasil cukup senjang, artinya masih terdapat ketentuan yang belum diterapkan. Hasil analisis pada komponen pengawasan memberikan kesimpulan jika masih terdapat kepala sekolah yang tidak menjalankan fungsinya sebagai pengawas internal.Therefore, the aims of study are to investigate the implementation of the standard process, analyze the discrepancy rate and design the solution toward the issue of discrepancy. This research uses the quantitative descriptive approach. There are several aspects investigated; (a) lesson plan, (b) learning process, (c) evaluation of learning result, and (d) headmasters control. To collect the data, the methods of observation, interview, and documentation are used. The result is explained in form of criteria. It is no discrepancy for lesson plans, means that most of the lesson plans are in accord with the Basic Principles issued by Ministry of Education and Culture Number 65 in 2013. The learning process has a quite discrepancy rate, means the standard process is incompletely applied; so does the evaluation which ignores several principles to apply. It is also noted that some headmasters ignore their function as an internal supervisor. To sum up, the discrepancy issue needs further concrete solution.

Ferromagnetic Resonance Biosensor for Homogeneous and Volumetric Detection of DNA

2017 ◽  
Author(s):  
Bo Tian ◽  
Peter Svedlindh ◽  
Mattias Strömberg ◽  
Erik Wetterskog
Keyword(s):  
Magnetic Nanoparticles ◽  
Ferromagnetic Resonance ◽  
Limit Of Detection ◽  
Point Of Care ◽  
Rolling Circle Amplification ◽  
Resonance Field ◽  
Isothermal Amplification ◽  
Detection Sensitivity ◽  
Serum Samples ◽  
Rolling Circle

In this work, we demonstrate for the first time, a ferromagnetic resonance (FMR) based homogeneous and volumetric biosensor for magnetic label detection. Two different isothermal amplification methods, <i>i.e.</i>, rolling circle amplification (RCA) and loop-mediated isothermal amplification (LAMP) are adopted and combined with a standard electron paramagnetic resonance (EPR) spectrometer for FMR biosensing. For RCA-based FMR biosensor, binding of RCA products of a synthetic Vibrio cholerae target DNA sequence gives rise to the formation of aggregates of magnetic nanoparticles. Immobilization of nanoparticles within the aggregates leads to a decrease of the net anisotropy of the system and a concomitant increase of the resonance field. A limit of detection of 1 pM is obtained with an average coefficient of variation of 0.16%, which is superior to the performance of other reported RCA-based magnetic biosensors. For LAMP-based sensing, a synthetic Zika virus target oligonucleotide is amplified and detected in 20% serum samples. Immobilization of magnetic nanoparticles is induced by their co-precipitation with Mg<sub>2</sub>P<sub>2</sub>O<sub>7</sub> (a by-product of LAMP) and provides a detection sensitivity of 100 aM. The fast measurement, high sensitivity and miniaturization potential of the proposed FMR biosensing technology makes it a promising candidate for designing future point-of-care devices.<br>

Fast Turn-around Failure Analysis of Metal Interconnection Using FIB and LA ICP-MS

2010 ◽  
Author(s):  
Zixiao Pan ◽  
Wei Wei ◽  
Fuhe Li
Keyword(s):  
Failure Analysis ◽  
Inductively Coupled Plasma ◽  
Structural Damage ◽  
Focused Ion Beam ◽  
Ion Beam ◽  
Detection Sensitivity ◽  
Chemical Contamination ◽  
Inductively Coupled ◽  
Minimal Sample ◽  
Icp Ms

Abstract This paper introduces our effort in failure analysis of a 200 nm thick metal interconnection on a glass substrate and covered with a passivation layer. Structural damage in localized areas of the metal interconnections was observed with the aid of focused ion beam (FIB) cross-sectioning. Laser ablation inductively coupled plasma mass spectroscopy (LA ICP-MS) was then applied to the problematic areas on the interconnection for chemical survey. LA ICP-MS showed direct evidence of localized chemical contamination, which has likely led to corrosion (or over-etching) of the metal interconnection and the assembly failure. Due to the high detection sensitivity of LA ICP-MS and its compatibility with insulating material analysis, minimal sample preparation is required. As a result, the combination of FIB and LA ICP-MS enabled successful meso-scale failure analysis with fast turnaround and reasonable cost.

Enhanced Detection Sensitivity with Pulsed Laser Digital Signal Integration Algorithm

2006 ◽  
Author(s):  
A.C.T. Quah ◽  
J.C.H. Phang ◽  
L.S. Koh ◽  
S.H. Tan ◽  
C.M. Chua
Keyword(s):  
Fault Localization ◽  
Pulsed Laser ◽  
Digital Signal ◽  
Detection Sensitivity ◽  
Signal Integration ◽  
Laser Operation ◽  
Frequency Range ◽  
Integration Algorithm ◽  
Detection Systems ◽  
Lock In

Abstract This paper describes a pulsed laser induced digital signal integration algorithm for pulsed laser operation that is compatible with existing ac-coupled and dc-coupled detection systems for fault localization. This algorithm enhances laser induced detection sensitivity without a lock-in amplifier. The best detection sensitivity is achieved at a pulsing frequency range between 500 Hz to 1.5 kHz. Within this frequency range, the algorithm is capable of achieving more than 9 times enhancement in detection sensitivity.

Pseudo-Dynamic Fault Isolation Technique Using Backside Emission Microscopy – Case Study, Where All Other Methods Fail

2002 ◽  
Author(s):  
Yoav Weizman ◽  
Ezra Baruch ◽  
Michael Zimin
Keyword(s):  
Failure Analysis ◽  
Process Variations ◽  
Fault Isolation ◽  
Operating Conditions ◽  
Detection Sensitivity ◽  
Isolation Technique ◽  
Root Cause ◽  
Emission Microscopy ◽  
Failure Location ◽  
Noisy Background

Abstract Emission microscopy is usually implemented for static operating conditions of the DUT. Under dynamic operation it is nearly impossible to identify a failure out of the noisy background. In this paper we describe a simple technique that could be used in cases where the temporal location of the failure was identified however the physical location is not known or partially known. The technique was originally introduced to investigate IDDq failures (1) in order to investigate timing related issues with automated tester equipment. Ishii et al (2) improved the technique and coupled an emission microscope to the tester for functional failure analysis of DRAMs and logic LSIs. Using consecutive step-by-step tester halting coupled to a sensitive emission microscope, one is able detect the failure while it occurs. We will describe a failure analysis case in which marginal design and process variations combined to create contention at certain logic states. Since the failure occurred arbitrarily, the use of the traditional LVP, that requires a stable failure, misled the analysts. Furthermore, even if we used advanced tools as PICA, which was actually designed to locate such failures, we believe that there would have been little chance of observing the failure since the failure appeared only below 1.3V where the PICA tool has diminished photon detection sensitivity. For this case the step-by-step halting technique helped to isolate the failure location after a short round of measurements. With the use of logic simulations, the root cause of the failure was clear once the failing gate was known.

Novel Corrosion Sensor for Vision 21 Systems

2007 ◽  
Author(s):  
Heng Ban ◽  
Bharat Soni
Keyword(s):  
Corrosion Sensor

scholarly journals Research on Detection Mechanism of Weld Defects of Carbon Steel Plate Based on Orthogonal Axial Eddy Current Probe

Sensors ◽  
2020 ◽  
Vol 20 (19) ◽  
pp. 5515
Author(s):  
Linnan Huang ◽  
Chunhui Liao ◽  
Xiaochun Song ◽  
Tao Chen ◽  
Xu Zhang ◽  
...  
Keyword(s):  
Carbon Steel ◽  
Eddy Current ◽  
Steel Plate ◽  
Difficult Problem ◽  
Eddy Current Testing ◽  
Detection Sensitivity ◽  
Detection Mechanism ◽  
Current Testing ◽  
Weld Defects ◽  
Lift Off

The uneven surface of the weld seam makes eddy current testing more susceptible to the lift-off effect of the probe. Therefore, the defect of carbon steel plate welds has always been a difficult problem in eddy current testing. This study aimed to design a new type of eddy current orthogonal axial probe and establish the finite element simulation model of the probe. The effect of the probe structure, coil turns, and coil size on the detection sensitivity was simulated. Further, a designed orthogonal axial probe was used to conduct a systematic experiment on the weld of carbon steel specimens, and the 0.2 mm width and 1 mm depth of weld defects of carbon steel plates were effectively detected. The experimental results showed that the new orthogonal axial eddy current probe effectively suppressed the unevenness effect of the weld surface on the lift-off effect during the detection process.

scholarly journals Four-dimensional vibrational spectroscopy for nanoscale mapping of phonon dispersion in BN nanotubes

2021 ◽  
Vol 12 (1) ◽  
Author(s):  
Ruishi Qi ◽  
Ning Li ◽  
Jinlong Du ◽  
Ruochen Shi ◽  
Yang Huang ◽  
...  
Keyword(s):  
Boron Nitride ◽  
Energy Loss ◽  
Phonon Dispersion ◽  
Hexagonal Boron Nitride ◽  
Real Space ◽  
Boron Nitride Nanotubes ◽  
Detection Sensitivity ◽  
Optical Modes ◽  
Optical And Mechanical Properties ◽  
Energy And Momentum

AbstractDirectly mapping local phonon dispersion in individual nanostructures can advance our understanding of their thermal, optical, and mechanical properties. However, this requires high detection sensitivity and combined spatial, energy and momentum resolutions, thus has been elusive. Here, we demonstrate a four-dimensional electron energy loss spectroscopy technique, and present position-dependent phonon dispersion measurements in individual boron nitride nanotubes. By scanning the electron beam in real space while monitoring both the energy loss and the momentum transfer, we are able to reveal position- and momentum-dependent lattice vibrations at nanometer scale. Our measurements show that the phonon dispersion of multi-walled nanotubes is locally close to hexagonal-boron nitride crystals. Interestingly, acoustic phonons are sensitive to defect scattering, while optical modes are insensitive to small voids. This work not only provides insights into vibrational properties of boron nitride nanotubes, but also demonstrates potential of the developed technique in nanoscale phonon dispersion measurements.

Sign in / Sign up

Export Citation Format

Share Document