scholarly journals Research and application of wireless sensor network technology in power transmission and distribution system

2020 ◽  
Vol 1 (2) ◽  
pp. 199-220
Author(s):  
Jianming Liu ◽  
Ziyan Zhao ◽  
Jerry Ji ◽  
Miaolong Hu
2017 ◽  
Vol 3 (2) ◽  
pp. 76
Author(s):  
Octarina Nur Samijayani ◽  
Ibnu Fauzi

<p><em>Abstrak</em> - <strong>Keamanan rumah menjadi hal yang sangat penting ketika pemilik rumah meninggalkan rumah dalam keadaan kosong. Selain pencurian, kebakaran juga merupakan masalah yang sering kali terjadi ketika rumah ditinggal pemiliknya. Sebagai alternatif solusi untuk menjaga dan mengawasi rumah yang diajukan pada penelitian ini ialah menggunakan teknologi Jaringan Sensor Nirkabel yang terintegrasi dengan jaringan internet, sehingga pemilik rumah tetap dapat mengawasi keadaan rumah dari jarak jauh. Pada penelitian ini dirancang prototype sistem rumah pintar atau Smart Home yang memanfaatkan teknologi Jaringan Sensor Nirkabel menggunakan standard Zigbee. Beberapa node sensor ditempatkan pada peralatan rumah, dimana setiap node dapat saling berkomunikasi secara wireless dan terpusat di node kordinator. Selanjutnya node kordinatior akan terhubung ke jaringan internet sehingga pemilik rumah dapat membuka aplikasi smart home kapan saja dan dimana saja. Rancangan sistem <em>Smart Home</em> disimulasikan menggunakan rumah model untuk menguji kinerja perangkat <em>Smart Home</em>. Pengujian kinerja Smart Home dimulai dengan pengujian keakurasian masing masing data sensor hingga waktu respon komunikasi dari sensor ke pusat monitoring. Tingkat error pembacaan suhu disetiap ruangan ialah 1 - 4.27%. Sensor PIR berhasil mendeteksi keberadaan orang di suatu ruangan dengan waktu delay </strong><strong>adalah 2.8 detik dengan jarak maksimal 5 meter</strong><strong>. Fungsi kendali dan monitoring (<em>on/off</em>) perangkat elektronik bekerja dengan baik, dengan waktu respon kurang dari 1 detik. Dari hasil pengujian komunikasi nirkabel antar node, diperoleh bahwa jarak maksimal antar node ialah sekitar 20 m, dengan rata-rata waktu respon pengiriman data ialah 1-2 detik. Adapun waktu respon mengalami delay mencapai 2 detik apabila beberapa perintah kendali dilakukan pada waktu yang bersamaan.</strong></p><p> </p><p><strong><em>Kata Kunci - </em></strong><em>Smart Home</em>, Jaringan Sensor Nirkabel, Zigbee.</p><p> </p><p><em>Abstrak</em><strong> - Home security becomes very important when homeowners leave the house empty. In addition to theft, fire is also a problem that often occurs when the house left the owner. As an alternative solution to maintain and supervise the homes submitted in this study is to use Wireless Sensor Network technology integrated with the Internet network, so that homeowners can still monitor the state of the house remotely. In this study designed prototype smart home system or Smart Home which utilizes Wireless Sensor Network technology using Zigbee standard. Some sensor nodes are placed in the home equipment, where each node can communicate wirelessly and centrally at the coordinator node. Next node coordinate will be connected to the internet network so that homeowners can open smart home application anytime and anywhere. The Smart Home system design is simulated using a home model to test the performance of Smart Home devices. Smart Home performance testing begins with testing the accuracy of each sensor data until the communication response time from the sensor to the monitoring center. The error rate of temperature readings in each room is 1 - 4.27%. PIR sensor successfully detects the presence of people in a room with a delay time is 2.8 seconds with a maximum distance of 5 meters. The control and monitoring functions (on / off) of electronic devices work well, with a response time of less than 1 second. From the results of testing wireless communication between nodes, obtained that the maximum distance between nodes is about 20 m, with the average response time of data transmission is 1-2 seconds. The response time has a delay of 2 seconds if some control commands are done at the same time.</strong><strong></strong></p><p><strong> </strong></p><p><strong><em>Keywords - </em></strong> <em>Smart Home</em>, Jaringan Sensor Nirkabel, Zigbee.</p>


Water distribution system is a network that supplies water to all the consumers through different means. Proper means of providing water to houses without compromising in quantity and quality is always a challenge. As it is a huge network keeping track of the utilization is difficult for the utility. Hence through this project we come up with a solution to solve this issue. Current technologies like Low Power Wide Area Networks, LoRa and sensor deployment techniques have been in research and were also tested in few rural areas but issues due to hardware deployment and large scale real time implementation was a challenge hence through this system we aim to create and simulate a real time scenario to test a sensor network model that could be implemented in large scale further. This project aims in building a wireless sensor network model for a smart water distribution system. In this system there is bidirectional communication between the consumer and the utility. Each house has a meter through which the amount of water consumed is sent to the utility board. The data has two fields containing the house ID and the data (water consumed); it is being sent to the data collection unit (DCU) which in-turn sends it to the central server so that the consumption is monitored in real time. All this is simulated using NETSIM and MATLAB.


2015 ◽  
Vol 2 (1) ◽  
pp. 3-14 ◽  
Author(s):  
Satoshi Yoshida ◽  
Naoki Hasegawa ◽  
Shigeo Kawasaki

A novel wireless sensor network system with compatibility of microwave power transmission (MPT) using a Gallium Nitride (GaN) power amplifier has been fabricated and tested. The sensor node operates using electrical power supplied by the MPT system. Time- and frequency-division operations are proposed for the compatibility. Under the frequency-division operation, receiving signal strength indicator of −85 dBm and packet error rate of <1% were measured when the available DC power of a rectifier with 160 mW output power. Under 120-min measurement, sustainable power balance between radio-frequency–DC conversion and power consumption in stable operation of the sensor node was achieved.


Sign in / Sign up

Export Citation Format

Share Document