Simultaneous Design of Positive Acceleration Velocity and Position Feedback Based Combined Damping and Tracking Control Scheme for Nanopositioners

2019 ◽  
Author(s):  
Adedayo K. Babarinde ◽  
Li-Min Zhu ◽  
Sumeet S. Aphale
Keyword(s):  
Tracking Control ◽  
Simultaneous Design ◽  
Positive Acceleration ◽  
Control Scheme ◽  
Position Feedback

scholarly journals Formation Tracking Control and Obstacle Avoidance of Unicycle-Type Robots Guaranteeing Continuous Velocities

Sensors ◽  
2021 ◽  
Vol 21 (13) ◽  
pp. 4374
Author(s):  
Jose Bernardo Martinez ◽  
Hector M. Becerra ◽  
David Gomez-Gutierrez
Keyword(s):  
Obstacle Avoidance ◽  
Tracking Control ◽  
Global Coordinate System ◽  
Avoidance Task ◽  
Time Varying ◽  
Control Laws ◽  
Formation Tracking ◽  
Control Scheme ◽  
First Time ◽  
Hierarchical Scheme

In this paper, we addressed the problem of controlling the position of a group of unicycle-type robots to follow in formation a time-varying reference avoiding obstacles when needed. We propose a kinematic control scheme that, unlike existing methods, is able to simultaneously solve the both tasks involved in the problem, effectively combining control laws devoted to achieve formation tracking and obstacle avoidance. The main contributions of the paper are twofold: first, the advantages of the proposed approach are not all integrated in existing schemes, ours is fully distributed since the formulation is based on consensus including the leader as part of the formation, scalable for a large number of robots, generic to define a desired formation, and it does not require a global coordinate system or a map of the environment. Second, to the authors’ knowledge, it is the first time that a distributed formation tracking control is combined with obstacle avoidance to solve both tasks simultaneously using a hierarchical scheme, thus guaranteeing continuous robots velocities in spite of activation/deactivation of the obstacle avoidance task, and stability is proven even in the transition of tasks. The effectiveness of the approach is shown through simulations and experiments with real robots.

scholarly journals Visual Tracking Control of Cable-Driven Hyper-Redundant Snake-Like Manipulator

2021 ◽  
Vol 11 (13) ◽  
pp. 6224
Author(s):  
Qisong Zhou ◽  
Jianzhong Tang ◽  
Yong Nie ◽  
Zheng Chen ◽  
Long Qin
Keyword(s):  
Visual Tracking ◽  
Tracking Control ◽  
Control Method ◽  
Adaptive Optimization ◽  
Tracking Errors ◽  
Kinematics Model ◽  
Compound Control ◽  
Original Intention ◽  
Control Scheme ◽  
Specific Geometry

The cable-driven hyper-redundant snake-like manipulator (CHSM) inspired by the biomimetic structure of vertebrate muscles and tendons, which consists of numerous joint units connected adjacently driven by elastic materials with hyper-redundant DOF, performs flexible kinematic skills and competitive compound capability under complicated working circumstances. Nevertheless, the drawback of lacking the ability to perceive the environment to perform intelligently in complex scenarios leaves a lot to be improved, which is the original intention to introduce visual tracking feedback acting as an instructor. In this paper, a cable-driven snake-like robotic arm combined with a visual tracking technique is introduced. A visual tracking approach based on dual correlation filter is designed to guide the CHSM in detecting the target and tracing after its trajectory. Specifically, it contains an adaptive optimization for the scale variation of the tracking target via pyramid sampling. For the CHSM, an explicit kinematics model is derived from its specific geometry relationships and followed by a simplification for the inverse kinematics based on some assumption or limitation. A control scheme is brought up to combine the kinematics with visual tracking via the processing tracking errors. The experimental results with a practical prototype validate the availability of the proposed compound control method with the derived kinematics model.

Adaptive attitude-tracking control of spacecraft considering on-orbit refuelling

2020 ◽  
pp. 014233122097313
Author(s):  
Yiqi Xu
Keyword(s):  
Tracking Control ◽  
Closed Loop ◽  
Closed Loop System ◽  
Tracking Errors ◽  
Attitude Tracking ◽  
Control Scheme ◽  
Inertia Model ◽  
And Performance ◽  
Attitude Tracking Control ◽  
The Stability

This paper studies the attitude-tracking control problem of spacecraft considering on-orbit refuelling. A time-varying inertia model is developed for spacecraft on-orbit refuelling, which actually includes two processes: fuel in the transfer pipe and fuel in the tank. Based upon the inertia model, an adaptive attitude-tracking controller is derived to guarantee the stability of the resulted closed-loop system, as well as asymptotic convergence of the attitude-tracking errors, despite performing refuelling operations. Finally, numerical simulations illustrate the effectiveness and performance of the proposed control scheme.

A Robust Trajectory Tracking Control Scheme of Two-Link Flexible Manipulator

2011 ◽  
Vol 328-330 ◽  
pp. 2108-2112
Author(s):  
Jing Shuang Lu ◽  
Chun Mei Du ◽  
Rui Zhou ◽  
Na Li
Keyword(s):  
Trajectory Tracking ◽  
Tracking Control ◽  
Vertical Plane ◽  
Flexible Manipulator ◽  
System Model ◽  
Error Signal ◽  
Dynamics Model ◽  
Trajectory Tracking Control ◽  
Control Scheme ◽  
Simulation Results

A simple dynamics model is established based on the two-link flexible manipulator moving within the vertical plane, and a robust simple control scheme is put forward. The advantages of this scheme are simple and good robustness. Only the error signal is needed when designing the control scheme and the acquirement of control signal does not depend on the system model. The simulation results show that this method has a good robustness and stability.

Contact Stability and Contact Safety of a Magnetic Resonance Imaging-Guided Robotic Catheter Under Heart Surface Motion

2021 ◽  
Vol 143 (7) ◽  
Author(s):  
Ran Hao ◽  
E. Erdem Tuna ◽  
M. Cenk Çavuşoğlu
Keyword(s):  
Contact Force ◽  
Force Control ◽  
Motion Prediction ◽  
Resonance Imaging ◽  
Contact Stability ◽  
Heart Motion ◽  
Control Scheme ◽  
Control Schemes ◽  
Position Feedback ◽  
Contact Force Control

Abstract Contact force quality is one of the most critical factors for safe and effective lesion formation during catheter based atrial fibrillation ablation procedures. In this paper, the contact stability and contact safety of a novel magnetic resonance imaging (MRI)-actuated robotic cardiac ablation catheter subject to surface motion disturbances are studied. First, a quasi-static contact force optimization algorithm, which calculates the actuation needed to achieve a desired contact force at an instantaneous tissue surface configuration is introduced. This algorithm is then generalized using a least-squares formulation to optimize the contact stability and safety over a prediction horizon for a given estimated heart motion trajectory. Four contact force control schemes are proposed based on these algorithms. The first proposed force control scheme employs instantaneous heart position feedback. The second control scheme applies a constant actuation level using a quasi-periodic heart motion prediction. The third and the last contact force control schemes employ a generalized adaptive filter-based heart motion prediction, where the former uses the predicted instantaneous position feedback, and the latter is a receding horizon controller. The performance of the proposed control schemes is compared and evaluated in a simulation environment.

Fault-Tolerant Formation Tracking Control for Heterogeneous Multiagent Systems with Directed Topology

2021 ◽  
Vol 01 (01) ◽  
pp. 2150001
Author(s):  
Jianye Gong ◽  
Yajie Ma ◽  
Bin Jiang ◽  
Zehui Mao
Keyword(s):  
Tracking Control ◽  
Formation Control ◽  
Control Algorithm ◽  
Fault Tolerant ◽  
Control Technique ◽  
Fault Estimation ◽  
Consensus Control ◽  
Formation Tracking ◽  
Control Scheme ◽  
Aerial Vehicle

In this paper, the adaptive fault-tolerant formation tracking control problem for a set of heterogeneous unmanned aerial vehicle (UAV) and unmanned ground vehicle (UGV) systems with actuator loss of effectiveness faults is investigated. The cooperative fault-tolerant formation control strategy for UAV and UGV collaborative systems is classified into the altitude consensus control scheme for follower UAVs and the position cooperative formation control scheme for all followers. The altitude consensus control algorithm is designed by utilizing backstepping control technique to drive all UAVs to a desired predefined height. Then, based on synchronization formation error information, the position cooperative formation control algorithm is proposed for all followers to reach the expected position and perform the desired formation configuration. The adaptive fault estimation term is adopted in the designed fault-tolerant formation control algorithm to compensate for the actuator loss of effectiveness fault. Finally, a simulation example is proposed to reveal the validity of the designed cooperative formation tracking control scheme.

Sign in / Sign up

Export Citation Format

Share Document