The influence of sheet metal anisotropy on laser forming process

2003 ◽  
Author(s):  
Peng Cheng ◽  
Y. Lawrence Yao
Keyword(s):  
Sheet Metal ◽  
Laser Forming ◽  
Forming Process

Bending Mechanism Analysis for Laser Forming of Metal Foam

2017 ◽  
Author(s):  
Tizian Bucher ◽  
Adelaide Young ◽  
Min Zhang ◽  
Chang Jun Chen ◽  
Y. Lawrence Yao
Keyword(s):  
Temperature Gradient ◽  
Sheet Metal ◽  
Metal Foam ◽  
Numerical Models ◽  
Image Correlation ◽  
Laser Forming ◽  
Mechanism Analysis ◽  
Forming Process ◽  
Experimental Proof ◽  
Post Process

To date, the industrial production of metal foam components has remained challenging, since few methods exist to manufacture metal foam into the shapes required in engineering applications. Laser forming is currently the only method with a high geometrical flexibility that is able to shape arbitrarily sized parts. What prevents the industrial implementation of the method, however, is that no detailed experimental analysis has been done of the metal foam strain response during laser forming, and hence the existing numerical models have been insufficiently validated. Moreover, current understanding of the laser forming process is poor, and it has been assumed, without experimental proof, that the temperature gradient mechanism (TGM) from sheet metal forming is the governing mechanism for metal foam. In this study, these issues were addressed by using digital image correlation (DIC) to obtain in-process and post-process strain data that was then used to validate a numerical model. Additionally, metal foam laser forming was compared with metal foam 4-point bending and sheet metal laser forming to explain why metal foam can be bent despite its high bending stiffness, and to evaluate whether TGM is valid for metal foam. The strain measurements revealed that tensile stretching is only a small contributor to foam bending, with the major contributor being compression-induced shortening. Unlike in sheet metal laser forming, this shortening is achieved through cell wall bending, as opposed to plastic compressive strains. Based on this important difference with traditional TGM, a modified temperature gradient mechanism (MTGM) was proposed.

The Influence of Sheet Metal Anisotropy on Laser Forming Process

2004 ◽  
Vol 127 (3) ◽  
pp. 572-582 ◽  
Author(s):  
Peng Cheng ◽  
Y. Lawrence Yao
Keyword(s):  
Sheet Metal ◽  
Electron Backscatter Diffraction ◽  
Plastic Anisotropy ◽  
Development Theory ◽  
Laser Forming ◽  
Uniaxial Tensile ◽  
Rolled Sheet ◽  
Forming Process ◽  
Anisotropy Index ◽  
Cold Rolled

Cold-rolled sheet metal that is often used in laser forming exhibits anisotropic properties, which are mostly caused by preferred orientations of grains developed during the severe plastic deformation such as cold rolling. In the present study, the textures of cold-rolled mild steel sheets are characterized and the influence of the plastic anisotropy on laser forming process is investigated. Deformation textures are measured in terms of pole figures and orientation distribution function (ODF) plots obtained through electron backscatter diffraction (EBSD). The anisotropy index (R-value) of the material with different rolling reductions is obtained by uniaxial tensile tests. Both are compared and agree with the texture development theory. Effects of the plastic anisotropy on bending deformation during the laser forming process are investigated experimentally and numerically. Various conditions including different laser power, scanning speed, and number of scans for sheets of different rolling reductions are considered and results are discussed. The simulation results are consistent with the experimental observations.

Fatigue Life Prediction After Laser Forming

2005 ◽  
Vol 127 (1) ◽  
pp. 157-164 ◽  
Author(s):  
J. Zhang ◽  
D. Pirzada ◽  
C. C. Chu ◽  
G. J. Cheng
Keyword(s):  
Fatigue Life ◽  
Sheet Metal ◽  
Low Carbon Steel ◽  
Laser Forming ◽  
Primary Concern ◽  
Low Carbon ◽  
Forming Process ◽  
Proposed Model ◽  
Life Model ◽  
Residual Stresses And Strains

Analysis of the laser forming process has been focused on geometry, yield strength, and microstructure change in the past. However fatigue life has been the primary concern for engineering components in many applications. For laser forming to become a practical rapid prototyping tool, research has to be done to predict fatigue life of sheet metal after laser forming. Microstructure as well as the distribution of residual stresses and strains changes during laser forming process. The current models cannot predict the fatigue life after laser forming accurately because of differences in assumptions. This work presents a model to predict fatigue life of sheet metal after laser forming. Results from microstructure integrated finite element modeling of laser forming are incorporated in the fatigue life model. Low carbon steel is used in this work to validate the model. It is shown that the proposed model can predict the fatigue life of sheet metal after laser forming with good accuracy. The predictions from the model are consistent with experimental results. Effects of laser forming conditions on fatigue life of sheet metal are under investigation.

An Analytical Study on Laser Forming Process of Sheet Metals, Using New Elasto-Plastic Temperature Dependent Material Model

2012 ◽  
Vol 622-623 ◽  
pp. 569-574 ◽  
Author(s):  
Shams Torabnia ◽  
Afshin Banazadeh
Keyword(s):  
Laser Beam ◽  
Sheet Metal ◽  
Analytical Model ◽  
Plastic Material ◽  
Material Model ◽  
Laser Forming ◽  
Sheet Metals ◽  
Temperature Dependent ◽  
Forming Process ◽  
Heated Zone

The laser forming process is one of the last technologies on forming of sheet metals with laser beam heat distribution. In this process laser beam moves across the top surface of the sheet metal and the heated zone expands and causes a great moment that deforms the sheet metal. Subsequently, the heated zone gets cooled and provides a reverse strain and moment. The final bending angle is a combination of two phases. Due to the complexity of the process, it is studied with different approaches; FEM analysis and analytical as well as empirical methods. The laser forming is a sensible process regarding the material properties. Also, because of the temperature change during the process, it is important to use a temperature dependent model. In this study The FEM model is proposed for simulation of the mechanism. Based on the simulation results, an integrated analytical model is then developed by a new elasto-plastic material model considering linear strain hardening, combined with the temperature dependent mechanical and physical properties. In addition, the temperature dependent tangential modulus is used instead of the yield point of the material to improve accuracy in the plastic deformation phase. Finally, the analytical model is compared with the FEM standard code, which showed a great conformity.

scholarly journals Comparison of Computer Extended Descriptive Geometry (CeDG) with CAD in the Modeling of Sheet Metal Patterns

Symmetry ◽  
2021 ◽  
Vol 13 (4) ◽  
pp. 685
Author(s):  
Manuel Prado-Velasco ◽  
Rafael Ortiz-Marín
Keyword(s):  
Sheet Metal ◽  
Computer Aided Design ◽  
Parametric Modeling ◽  
Descriptive Geometry ◽  
The Novel ◽  
Forming Process ◽  
Solid Models ◽  
Design Software ◽  
Solid Edge ◽  
Aided Design

The emergence of computer-aided design (CAD) has propelled the evolution of the sheet metal engineering field. Sheet metal design software tools include parameters associated to the part’s forming process during the pattern drawing calculation. Current methods avoid the calculation of a first pattern drawing of the flattened part’s neutral surface, independent of the forming process, leading to several methodological limitations. The study evaluates the reliability of the Computer Extended Descriptive Geometry (CeDG) approach to surpass those limitations. Three study cases that cover a significative range of sheet metal systems are defined and the associated solid models and patterns’ drawings are computed through Geogebra-based CeDG and two selected CAD tools (Solid Edge 2020, LogiTRACE v14), with the aim of comparing their reliability and accuracy. Our results pointed to several methodological lacks in LogiTRACE and Solid Edge that prevented to solve properly several study cases. In opposition, the novel CeDG approach for the computer parametric modeling of 3D geometric systems overcame those limitations so that all models could be built and flattened with accuracy and without methodological limitations. As additional conclusion, the success of CeDG suggests the necessity to recover the relevance of descriptive geometry as a key core in graphic engineering.

scholarly journals Laser Welding of High-strength Aluminium Alloys for the Sheet Metal Forming Process

Procedia CIRP ◽  
2014 ◽  
Vol 18 ◽  
pp. 203-208 ◽  
Author(s):  
J. Enz ◽  
S. Riekehr ◽  
V. Ventzke ◽  
N. Sotirov ◽  
N. Kashaev
Keyword(s):  
Laser Welding ◽  
Sheet Metal ◽  
Sheet Metal Forming ◽  
Metal Forming ◽  
Aluminium Alloys ◽  
High Strength ◽  
Forming Process ◽  
Metal Forming Process

A New Stretch-Forming Process Based on Loading at Discrete Points and its Numerical Investigation

2013 ◽  
Vol 423-426 ◽  
pp. 737-740
Author(s):  
Zhong Yi Cai ◽  
Mi Wang ◽  
Chao Jie Che
Keyword(s):  
Sheet Metal ◽  
Three Dimensional ◽  
Discrete Point ◽  
Stretch Forming ◽  
Sheet Metal Part ◽  
Metal Part ◽  
Forming Process ◽  
Loading Trajectory ◽  
New Process ◽  
Forming Defects

A new stretch-forming process based on discretely loading for three-dimensional sheet metal part is proposed and numerically investigated. The gripping jaw in traditional stretch-forming process is replaced by the discrete array of loading units, and the stretching load is applied at discrete points on the two ends of sheet metal. By controlling the loading trajectory at the each discrete point, an optimal stretch-forming process can be realized. The numerical results on the new stretch-forming process of a saddle-shaped sheet metal part show that the distribution of the deformation on the formed surface of new process is more uniform than that of traditional stretch-forming, and the forming defects can be avoided and better forming quality will be obtained.

Magnesium Sheet Metal Forming Considering its Specific Yield Behavior

2005 ◽  
Vol 6-8 ◽  
pp. 771-778 ◽  
Author(s):  
M. Redecker ◽  
Karl Roll ◽  
S. Häussinger
Keyword(s):  
Sheet Metal ◽  
Elevated Temperatures ◽  
Flow Behavior ◽  
Specific Yield ◽  
Forming Limit ◽  
Forming Process ◽  
Local Flow ◽  
Yield Behavior ◽  
Magnesium Sheet ◽  
Testing Procedures

In recent years very strong efforts have been undertaken to build light weight structures of car bodies in the automotive industry. Structural technologies like Space Frame, tailored blanks and relief-embossed panels are well-known and already in use. Beside that there is a large assortment of design materials with low density or high strength. Magnesium alloys are lighter by approximately 34 percent than aluminum alloys and are considered to be the lightest metallic design material. However forming processes of magnesium sheet metal are difficult due to its complex plasticity behavior. Strain rate sensitivity, asymmetric and softening yield behavior of magnesium are leading to a complex description of the forming process. Asymmetric yield behavior means different yield stress depending on tensile or compressive loading. It is well-known that elevated temperatures around 200°C improve the local flow behavior of magnesium. Experiments show that in this way the forming limit curves can be considerably increased. So far the simulation of the forming process including temperature, strain rates and plastic asymmetry is not state-of-the-art. Moreover, neither reliable material data nor standardized testing procedures are available. According to the great attractiveness of magnesium sheet metal parts there is a serious need for a reliable modeling of the virtual process chain including the specification of required mechanical properties. An existing series geometry which already can be made of magnesium at elevated temperatures is calculated using the finite element method. The results clarify the failings of standard calculation methods and show potentials of its improvement.

Estimation of Residual Stress in Cold Rolled Iron-Disks Using Magnetic and Ultrasonic Methods and Neutron Diffraction Technique

1994 ◽  
Vol 376 ◽  
Author(s):  
V.L. Aksenov ◽  
A.M. Balagurov ◽  
G.D Bokuchava ◽  
J. Schreiber ◽  
Yu.V. Taran Frank
Keyword(s):  
Residual Stress ◽  
Neutron Diffraction ◽  
Sheet Metal ◽  
Diffraction Method ◽  
Calibration Procedure ◽  
Rolled Sheet ◽  
Forming Process ◽  
Practical Applications ◽  
Ultrasonic Methods ◽  
Cold Rolled

ABSTRACTVariation of internal stress states in cold rolled sheet metal can essentially influence the result of forming processes. Therefore it is important to control the forming process by a practicable in line testing method. For this purpose magnetic and ultrasonic nondestructive methods are available. However, it is necessary to calibrate these techniques. This paper describes a first step of such a calibration procedure making use of the neutron diffraction method. On the basis of the diffraction results an assessment of the magnetic and ultrasonic methods for the estimation of residual stress in the cold rolled iron-disks was made. Reasonable measuring concepts for practical applications to forming processes with cold rolled sheet metal are discussed.

Comparison between an Advanced Numerical Simulation of Sheet Incremental Forming Using Adaptive Remeshing and Experimental Results

2013 ◽  
Vol 554-557 ◽  
pp. 1375-1381 ◽  
Author(s):  
Laurence Giraud-Moreau ◽  
Abel Cherouat ◽  
Jie Zhang ◽  
Houman Borouchaki
Keyword(s):  
Numerical Simulation ◽  
Numerical Model ◽  
Sheet Metal ◽  
Metal Forming ◽  
Tool Path ◽  
Incremental Forming ◽  
Computation Time ◽  
Experimental Results ◽  
Forming Process ◽  
Adaptive Remeshing

Recently, new sheet metal forming technique, incremental forming has been introduced. It is based on using a single spherical tool, which is moved along CNC controlled tool path. During the incremental forming process, the sheet blank is fixed in sheet holder. The tool follows a certain tool path and progressively deforms the sheet. Nowadays, numerical simulations of metal forming are widely used by industry to predict the geometry of the part, stresses and strain during the forming process. Because incremental forming is a dieless process, it is perfectly suited for prototyping and small volume production [1, 2]. On the other hand, this process is very slow and therefore it can only be used when a slow series production is required. As the sheet incremental forming process is an emerging process which has a high industrial interest, scientific efforts are required in order to optimize the process and to increase the knowledge of this process through experimental studies and the development of accurate simulation models. In this paper, a comparison between numerical simulation and experimental results is realized in order to assess the suitability of the numerical model. The experimental investigation is realized using a three-axis CNC milling machine. The forming tool consists in a cylindrical rotating punch with a hemispherical head. A subroutine has been developed to describe the tool path from CAM procedure. A numerical model has been developed to simulate the sheet incremental forming process. The finite element code Abaqus explicit has been used. The simulation of the incremental forming process stays a complex task and the computation time is often prohibitive for many reasons. During this simulation, the blank is deformed by a sequence of small increments that requires many numerical increments to be performed. Moreover, the size of the tool diameter is generally very small compared to the size of the metal sheet and thus the contact zone between the tool and the sheet is limited. As the tool deforms almost every part of the sheet, small elements are required everywhere in the sheet resulting in a very high computation time. In this paper, an adaptive remeshing method has been used to simulate the incremental forming process. This strategy, based on adaptive refinement and coarsening procedures avoids having an initially fine mesh, resulting in an enormous computing time. Experiments have been carried out using aluminum alloy sheets. The final geometrical shape and the thickness profile have been measured and compared with the numerical results. These measurements have allowed validating the proposed numerical model. References [1] M. Yamashita, M. Grotoh, S.-Y. Atsumi, Numerical simulation of incremental forming of sheet metal, J. Processing Technology, No. 199 (2008), p. 163 172. [2] C. Henrard, A.M. Hbraken, A. Szekeres, J.R. Duflou, S. He, P. Van Houtte, Comparison of FEM Simulations for the Incremental Forming Process, Advanced Materials Research, 6-8 (2005), p. 533-542.

Sign in / Sign up

Export Citation Format

Share Document