Reducing Tire-Induced Noise and Vibration2

2006 ◽  
Vol 34 (2) ◽  
pp. 135-147
Author(s):  
C. Yilmaz ◽  
G. M. Hulbert ◽  
N. Kikuchi
Keyword(s):  
Frequency Response ◽  
Cost Effective ◽  
Vehicle Speed ◽  
New Approach ◽  
Noise And Vibration ◽  
Suspension Systems ◽  
Daunting Task ◽  
Wide Range ◽  
Practical Performance ◽  
New Perspective

Abstract Tire-induced noise and vibration spans a wide range of frequencies, depending on, among other attributes, tread design, road surface, and vehicle speed. Vehicle designers are faced with the daunting task of minimizing this broad frequency of energy. The design of suspension systems must take into account the need to have a well-tuned frequency response. In this paper, a new approach toward minimizing tire-induced noise and vibration is presented. The methodology is based upon a new perspective of employing antiresonance, as opposed to damping phenomena, to effectively tune systems for practical performance. The mechanical structure of the system is amenable to cost-effective manufacture and can be packaged in different configurations. We present the fundamental approach toward the design and give several example configurations.

Decision and Design Methodologies for the Lay-Out of Modular Dies for High-Pressure-Die-Cast-Processes

2009 ◽  
Vol 618-619 ◽  
pp. 345-348 ◽  
Author(s):  
Yann Queudeville ◽  
Todor Ivanov ◽  
Christopher Nußbaum ◽  
Uwe Vroomen ◽  
Andreas Bührig-Polaczek
Keyword(s):  
High Pressure ◽  
Design Methodology ◽  
Cost Effective ◽  
Strong Increase ◽  
German Research Foundation ◽  
New Concepts ◽  
Die Cast ◽  
Wide Range ◽  
New Perspective ◽  
Pressure Die Casting

Within the project “Decision and design methodology for the lay-out of modular dies” which is part of the Cluster of Excellence “Integrative Production Technology for High-Wage Countries”, established and financed by the German Research Foundation (DFG), the main objective is setting guidelines for cost-effective and high quality high pressure die casting (HPDC) moulds. The strong increase in product variants and the growing demand for individualised products results in a growing complexity of all related products. The main objective of this project is bridging the existing gap between individual manufacturing and mass production. A new perspective on the value creation chain of HPDC-dies has to be established. First of all, the methodology for the lay-out of modular dies consists in an analysis of the already produced die cast moulds. For the development of modules, standard parts, and different die types, a wide range of HPDC-dies will be compared with each other and subsequently clustered along specific criteria such as size or number of core sliders. Another step consists in optimising setting-up time and maintenance. The as-is state in different companies will be examined. With this knowledge, new concepts will be developed, keeping a modular configuration of the different parts involved in mind. Concepts for modular core sliders, guides and ejectors will be developed and will be investigated for further use. Based on this information, the decision and design methodology for the lay-out of modular HPDC -dies will be examined and developed throughout the process.

2D Color-Intensity Representation of Ultrasonic Thickness Gauge Measurements

2020 ◽  
pp. 1192-1198
Author(s):  
M.S. Mohammad ◽  
Tibebe Tesfaye ◽  
Kim Ki-Seong
Keyword(s):  
Cost Effective ◽  
The Other ◽  
Thickness Gauge ◽  
Color Intensity ◽  
Digital Readout ◽  
Flat Surfaces ◽  
Video Cameras ◽  
Wide Range ◽  
Cost Effective Alternative ◽  
Ultrasonic Thickness

Ultrasonic thickness gauges are easy to operate and reliable, and can be used to measure a wide range of thicknesses and inspect all engineering materials. Supplementing the simple ultrasonic thickness gauges that present results in either a digital readout or as an A-scan with systems that enable correlating the measured values to their positions on the inspected surface to produce a two-dimensional (2D) thickness representation can extend their benefits and provide a cost-effective alternative to expensive advanced C-scan machines. In previous work, the authors introduced a system for the positioning and mapping of the values measured by the ultrasonic thickness gauges and flaw detectors (Tesfaye et al. 2019). The system is an alternative to the systems that use mechanical scanners, encoders, and sophisticated UT machines. It used a camera to record the probe’s movement and a projected laser grid obtained by a laser pattern generator to locate the probe on the inspected surface. In this paper, a novel system is proposed to be applied to flat surfaces, in addition to overcoming the other limitations posed due to the use of the laser projection. The proposed system uses two video cameras, one to monitor the probe’s movement on the inspected surface and the other to capture the corresponding digital readout of the thickness gauge. The acquired images of the probe’s position and thickness gauge readout are processed to plot the measured data in a 2D color-coded map. The system is meant to be simpler and more effective than the previous development.

Factors Affecting Molecular Self-Assembly and Its Mechanism

2012 ◽  
Vol 9 (1) ◽  
pp. 43 ◽  
Author(s):  
Hueyling Tan
Keyword(s):  
Self Assembly ◽  
Building Blocks ◽  
Molecular Engineering ◽  
Molecular Structures ◽  
Polymer Science ◽  
New Approach ◽  
Factors Affecting ◽  
Dna Structures ◽  
Self Assembling ◽  
Wide Range

Molecular self-assembly is ubiquitous in nature and has emerged as a new approach to produce new materials in chemistry, engineering, nanotechnology, polymer science and materials. Molecular self-assembly has been attracting increasing interest from the scientific community in recent years due to its importance in understanding biology and a variety of diseases at the molecular level. In the last few years, considerable advances have been made in the use ofpeptides as building blocks to produce biological materials for wide range of applications, including fabricating novel supra-molecular structures and scaffolding for tissue repair. The study ofbiological self-assembly systems represents a significant advancement in molecular engineering and is a rapidly growing scientific and engineering field that crosses the boundaries ofexisting disciplines. Many self-assembling systems are rangefrom bi- andtri-block copolymers to DNA structures as well as simple and complex proteins andpeptides. The ultimate goal is to harness molecular self-assembly such that design andcontrol ofbottom-up processes is achieved thereby enabling exploitation of structures developed at the meso- and macro-scopic scale for the purposes oflife and non-life science applications. Such aspirations can be achievedthrough understanding thefundamental principles behind the selforganisation and self-synthesis processes exhibited by biological systems.

Janus – A New Approach to Air Combat Pilot Training

2019 ◽  
Vol 2019 (4) ◽  
pp. 7-22
Author(s):  
Georges Bridel ◽  
Zdobyslaw Goraj ◽  
Lukasz Kiszkowiak ◽  
Jean-Georges Brévot ◽  
Jean-Pierre Devaux ◽  
...  
Keyword(s):  
Low Cost ◽  
Cost Effective ◽  
High Energy ◽  
Training System ◽  
Embedded Sensors ◽  
Pilot Training ◽  
New Approach ◽  
Combat Aircraft ◽  
Air Combat ◽  
The Cost

Abstract Advanced jet training still relies on old concepts and solutions that are no longer efficient when considering the current and forthcoming changes in air combat. The cost of those old solutions to develop and maintain combat pilot skills are important, adding even more constraints to the training limitations. The requirement of having a trainer aircraft able to perform also light combat aircraft operational mission is adding unnecessary complexity and cost without any real operational advantages to air combat mission training. Thanks to emerging technologies, the JANUS project will study the feasibility of a brand-new concept of agile manoeuvrable training aircraft and an integrated training system, able to provide a live, virtual and constructive environment. The JANUS concept is based on a lightweight, low-cost, high energy aircraft associated to a ground based Integrated Training System providing simulated and emulated signals, simulated and real opponents, combined with real-time feedback on pilot’s physiological characteristics: traditionally embedded sensors are replaced with emulated signals, simulated opponents are proposed to the pilot, enabling out of sight engagement. JANUS is also providing new cost effective and more realistic solutions for “Red air aircraft” missions, organised in so-called “Aggressor Squadrons”.

Extraction of DNA from a Wide Range of Objects by Treatment with Ammonium Salts

2020 ◽  
Vol 36 (6) ◽  
pp. 98-106
Author(s):  
E.I. Levitin ◽  
B.V. Sviridov ◽  
O.V. Piksasova ◽  
T.E. Shustikova
Keyword(s):  
Dna Extraction ◽  
Dna Isolation ◽  
Tissue Samples ◽  
New Approach ◽  
Cell Wall Disruption ◽  
Wide Range ◽  
Low Salt ◽  
Mammalian Blood ◽  
Plasmid Extraction ◽  
Two Hybrid

Currently, simple, rapid, and efficient techniques for DNA isolation from a wide range of organisms are in demand in biotechnology and bioinformatics. A key (and often limiting) step is the cell wall disruption and subsequent DNA extraction from the disintegrated cells. We have developed a new approach to DNA isolation from organisms with robust cell walls. The protocol includes the following steps: treatment of cells or tissue samples with ammonium acetate followed by cell lysis in low-salt buffer with the addition of SDS. Further DNA extraction is carried out according to standard methods. This approach is efficient for high-molecular native DNA isolation from bacteria, ascomycetes, yeast, and mammalian blood; it is also useful for express analysis of environmental microbial isolates and for plasmid extraction for two-hybrid library screening. express method for DNA isolation; ammonium salt treatment (в русских ключевых такой порядок), osmotic breakage of cells This study was financially supported by the NRC "Kurchatov Institute"-GOSNIIGENETIKA Kurchatov Genomic Center.

The Future of Plasma-Based Surface Engineering Techniques in Tribology (Keynote)

2005 ◽  
Author(s):  
Allan Matthews ◽  
Adrian Leyland
Keyword(s):  
Surface Engineering ◽  
Performance Enhancement ◽  
Bulk Material ◽  
Cost Savings ◽  
Cost Effective ◽  
Ceramic Coatings ◽  
Performance Improvements ◽  
Treatment Techniques ◽  
Wide Range ◽  
Macro Scale

Over the past twenty years or so, there have been major steps forward both in the understanding of tribological mechanisms and in the development of new coating and treatment techniques to better “engineer” surfaces to achieve reductions in wear and friction. Particularly in the coatings tribology field, improved techniques and theories which enable us to study and understand the mechanisms occurring at the “nano”, “micro” and “macro” scale have allowed considerable progress to be made in (for example) understanding contact mechanisms and the influence of “third bodies” [1–5]. Over the same period, we have seen the emergence of the discipline which we now call “Surface Engineering”, by which, ideally, a bulk material (the ‘substrate’) and a coating are combined in a way that provides a cost-effective performance enhancement of which neither would be capable without the presence of the other. It is probably fair to say that the emergence and recognition of Surface Engineering as a field in its own right has been driven largely by the availability of “plasma”-based coating and treatment processes, which can provide surface properties which were previously unachievable. In particular, plasma-assisted (PA) physical vapour deposition (PVD) techniques, allowing wear-resistant ceramic thin films such as titanium nitride (TiN) to be deposited on a wide range of industrial tooling, gave a step-change in industrial productivity and manufactured product quality, and caught the attention of engineers due to the remarkable cost savings and performance improvements obtained. Subsequently, so-called 2nd- and 3rd-generation ceramic coatings (with multilayered or nanocomposite structures) have recently been developed [6–9], to further extend tool performance — the objective typically being to increase coating hardness further, or extend hardness capabilities to higher temperatures.

scholarly journals Gamma models for estimating the odds ratio for a skewed biomarker measured in pools and subject to errors

Biostatistics ◽  
2019 ◽  
Author(s):  
Dane R Van Domelen ◽  
Emily M Mitchell ◽  
Neil J Perkins ◽  
Enrique F Schisterman ◽  
Amita K Manatunga ◽  
...  
Keyword(s):  
Odds Ratio ◽  
Adjusted Odds Ratio ◽  
Lower Cost ◽  
Cost Effective ◽  
Ratio Estimation ◽  
Statistical Efficiency ◽  
Function Model ◽  
Processing Error ◽  
Wide Range ◽  
Pooled Samples

SUMMARYMeasuring a biomarker in pooled samples from multiple cases or controls can lead to cost-effective estimation of a covariate-adjusted odds ratio, particularly for expensive assays. But pooled measurements may be affected by assay-related measurement error (ME) and/or pooling-related processing error (PE), which can induce bias if ignored. Building on recently developed methods for a normal biomarker subject to additive errors, we present two related estimators for a right-skewed biomarker subject to multiplicative errors: one based on logistic regression and the other based on a Gamma discriminant function model. Applied to a reproductive health dataset with a right-skewed cytokine measured in pools of size 1 and 2, both methods suggest no association with spontaneous abortion. The fitted models indicate little ME but fairly severe PE, the latter of which is much too large to ignore. Simulations mimicking these data with a non-unity odds ratio confirm validity of the estimators and illustrate how PE can detract from pooling-related gains in statistical efficiency. These methods address a key issue associated with the homogeneous pools study design and should facilitate valid odds ratio estimation at a lower cost in a wide range of scenarios.

scholarly journals Sporulation in solventogenic and acetogenic clostridia

2021 ◽  
Author(s):  
Mamou Diallo ◽  
Servé W. M. Kengen ◽  
Ana M. López-Contreras
Keyword(s):  
Current Knowledge ◽  
Carbon Sources ◽  
Cost Effective ◽  
Biotechnological Production ◽  
Key Points ◽  
Wide Range ◽  
Potential Applications ◽  
A Cell ◽  
Sporulation Initiation ◽  
Solventogenic Clostridia

AbstractThe Clostridium genus harbors compelling organisms for biotechnological production processes; while acetogenic clostridia can fix C1-compounds to produce acetate and ethanol, solventogenic clostridia can utilize a wide range of carbon sources to produce commercially valuable carboxylic acids, alcohols, and ketones by fermentation. Despite their potential, the conversion by these bacteria of carbohydrates or C1 compounds to alcohols is not cost-effective enough to result in economically viable processes. Engineering solventogenic clostridia by impairing sporulation is one of the investigated approaches to improve solvent productivity. Sporulation is a cell differentiation process triggered in bacteria in response to exposure to environmental stressors. The generated spores are metabolically inactive but resistant to harsh conditions (UV, chemicals, heat, oxygen). In Firmicutes, sporulation has been mainly studied in bacilli and pathogenic clostridia, and our knowledge of sporulation in solvent-producing or acetogenic clostridia is limited. Still, sporulation is an integral part of the cellular physiology of clostridia; thus, understanding the regulation of sporulation and its connection to solvent production may give clues to improve the performance of solventogenic clostridia. This review aims to provide an overview of the triggers, characteristics, and regulatory mechanism of sporulation in solventogenic clostridia. Those are further compared to the current knowledge on sporulation in the industrially relevant acetogenic clostridia. Finally, the potential applications of spores for process improvement are discussed.Key Points• The regulatory network governing sporulation initiation varies in solventogenic clostridia.• Media composition and cell density are the main triggers of sporulation.• Spores can be used to improve the fermentation process.

scholarly journals Detecting multiple generalized change-points by isolating single ones

Metrika ◽  
2021 ◽  
Author(s):  
Andreas Anastasiou ◽  
Piotr Fryzlewicz
Keyword(s):  
Model Selection ◽  
Linear Trend ◽  
Information Criterion ◽  
Change Points ◽  
Isolation Technique ◽  
New Approach ◽  
Piecewise Constant ◽  
Practical Performance ◽  
R Packages ◽  
The Times

AbstractWe introduce a new approach, called Isolate-Detect (ID), for the consistent estimation of the number and location of multiple generalized change-points in noisy data sequences. Examples of signal changes that ID can deal with are changes in the mean of a piecewise-constant signal and changes, continuous or not, in the linear trend. The number of change-points can increase with the sample size. Our method is based on an isolation technique, which prevents the consideration of intervals that contain more than one change-point. This isolation enhances ID’s accuracy as it allows for detection in the presence of frequent changes of possibly small magnitudes. In ID, model selection is carried out via thresholding, or an information criterion, or SDLL, or a hybrid involving the former two. The hybrid model selection leads to a general method with very good practical performance and minimal parameter choice. In the scenarios tested, ID is at least as accurate as the state-of-the-art methods; most of the times it outperforms them. ID is implemented in the R packages IDetect and breakfast, available from CRAN.

Sign in / Sign up

Export Citation Format

Share Document