scholarly journals Longevity of Bonding of Self-adhesive Resin Cement to Dentin

2016 ◽  
Vol 41 (3) ◽  
pp. E64-E72 ◽  
Author(s):  
TC Simões ◽  
ÍV Luque-Martinez ◽  
RR Moraes ◽  
ATG Sá ◽  
AD Loguercio ◽  
...  
Keyword(s):  
Bond Strength ◽  
Water Storage ◽  
Resin Cement ◽  
Fiber Post ◽  
Adhesive Resin ◽  
Root Dentin ◽  
Adhesive Resin Cement ◽  
Post Hoc ◽  
Push Out ◽  
Over Time

SUMMARY Objective: To evaluate the effect of root dentin treatment on the bonding of self-adhesive resin cement after 24 hours and after 6 months. Methods: A total of 48 single-rooted premolars were endodontically treated and divided into four groups (n=12): Adper Scotchbond Multi-Purpose + RelyX ARC (ARC); RelyX U200 (U200); EDTA + RelyX U200 (EU200); and phosphoric acid (H3PO4) + RelyX U200 (HU200). After filling the roots, an Exacto No. 2 fiber post was cleaned, treated with silane (60 seconds), positioned, and light cured (LED; 60 seconds at 1200 mW/cm2). After storage (37°C/24 h), the roots were cut to obtain two discs (1 mm) of each third. They were stored in distilled water (24 hours at 37°C); one disc of each root-third was subjected to the push-out test (0.5 mm/min) at 24 hours and the other disc after six months of water storage (37°C). The data on the root-thirds were averaged for statistical purposes. The average values of bond strength (MPa) were analyzed by two-way analysis of variance and post hoc Student-Newman-Keuls (5%). Results: There were statistical differences for the treatment of dentin (p<0.001), for time (p=0.003), and the interaction of treatment and time (p=0.017). After 24 hours, we observed lower bond strength in the HU200 group when compared with other groups (ARC, U200, and EU200). After six months, HU200 showed the lowest bond strength. Higher strengths were observed for EU200 and U200 similarly, which were higher than ARC. Conclusion: The bonding of the self-adhesive resin cement varied over time in the tested groups.

scholarly journals COMPARATIVE EVALUATION OF PUSH-OUT BOND STRENGTH AND FAILURE MODES OF FIBER POST CEMENTED WITH DIFFERENT ADHESIVE RESIN CEMENTS: AN IN-VITRO STUDY

2020 ◽  
pp. 1-3
Author(s):  
Sonali Bansod ◽  
Ashwini Gaikwad ◽  
Abhijit Jadhav
Keyword(s):  
Bond Strength ◽  
Resin Cement ◽  
Fiber Post ◽  
Resin Cements ◽  
Adhesive Resin ◽  
Significant Difference ◽  
Group 3 ◽  
Adhesive Resin Cement ◽  
Group 2 ◽  
Push Out

Aim: To compare the push-out bond strength and modes of failure of fiber post cemented with different adhesive resin cements. Materials and Method: Forty five single rooted teeth were randomly divided into three groups as, group 1- Fluorocore 2+, group 2- Rely-X U200 and group 3-G-Cem, according to the adhesive resin cement used. The roots were subjected to chemo-mechanical preparation and cemented with adhesive resin cement. The teeth were sectioned into slices of the different root thirds and tested for bond strength (push out). Results were analysed using Chi square, Mann Whitney U and Kruskal Wallis test was used to find the significance of study parameters between three or more groups, with p = 0.05 for statistical significance. Result: Push out bond strength of Fluorocore 2+ is significantly higher at coronal level than apical level. No significant difference observed between coronal, middle and apical levels in group 2 and in group 3. Conclusion: Fluorocore 2+ adhesive resin cement is best to use for luting the fibre post. Fluorocore 2+ forms better bonding with post as well as dentin proving its better efficiency clinically.

scholarly journals Effect of Anatomical Customization of the Fiber Post on the Bond Strength of a Self-Adhesive Resin Cement

2017 ◽  
Vol 2017 ◽  
pp. 1-6 ◽  
Author(s):  
Adricyla Teixeira Rocha ◽  
Leticia Machado Gonçalves ◽  
Ana Júlia de Carvalho Vasconcelos ◽  
Etevaldo Matos Maia Filho ◽  
Ceci Nunes Carvalho ◽  
...  
Keyword(s):  
Bond Strength ◽  
Glass Fiber ◽  
Resin Cement ◽  
Control Group ◽  
Fiber Post ◽  
Adhesive Resin ◽  
Fiber Posts ◽  
Glass Fiber Posts ◽  
Adhesive Resin Cement ◽  
Push Out

Aim. The aim of the study was to evaluate, by means of the push-out test, the effect of the anatomical customization of the fiber post on the bond strength of a self-adhesive resin cement. Methods. Twelve endodontically treated, human, upper central incisors were randomly divided into two groups (n=6): control (glass fiber posts cemented with Relyx® U200) and customized (glass fiber posts anatomically customized with translucent composite resin cemented with Relyx U200). The roots were sectioned into three slices, cervical, middle, and apical, and photographed with a digital camera attached to a stereomicroscopic loupe. The images were analyzed by software, for evaluation of the cement line. The slices were subsequently submitted to the push-out test until the post had completely extruded, and the fracture mode was analyzed with a stereomicroscopic loupe. Results. The results showed significant differences between the groups in the different root thirds in relation to the area occupied by air bubbles (p<0.05). Bond strength, when all the thirds are considered, was 8.77 ± 4.89 MPa for the control group and 16.96 ± 4.85 MPa for the customized group. Conclusion. The customized group showed greater bond resistance than the control group and a more uniform cement layer.

scholarly journals Swelling of self-adhesive resin cement increases long-term push-out bond strength of fiber post to dentin

2015 ◽  
Vol 14 (3) ◽  
pp. 246-250
Author(s):  
Fabrício Mezzomo Collares ◽  
Vicente Castelo Branco Leitune ◽  
Carolina Rocha Augusto ◽  
Patrícia Franken ◽  
Susana Maria Werner Samuel
Keyword(s):  
Bond Strength ◽  
Resin Cement ◽  
Fiber Post ◽  
Adhesive Resin ◽  
Adhesive Resin Cement ◽  
Push Out

scholarly journals Effect of Biomimetic Remineralization of Post Space Root Dentin on Push out Bond Strength of Fiber Post bonded with Self-adhesive Resin Cement (An in Vitro Study)

2020 ◽  
Author(s):  
Afaf Mohamed Al-Najajrah ◽  
Carl Hany Halim ◽  
Omnia Nabil
Keyword(s):  
Bond Strength ◽  
Bonding Strength ◽  
In Vitro Study ◽  
Resin Cement ◽  
Fiber Post ◽  
Adhesive Resin ◽  
Adhesive Resin Cement ◽  
Post Space ◽  
Push Out

Abstract Self-adhesive resin cement is highly recommended for cementation of fiber post systems, since it binds chemically with calcium ions in the hydroxyapatite particles without surface pretreatments of dentin. Unfortunately, chelating agents that are used to remove smear layer reduce the calcium ion content of superficial dentin. This study aims to evaluate the effect of remineralization of dentin on the bonding strength of fiber post using the biomimetic remineralizing agent CPP-ACP in vitro. Such a study will provide evidence on the possibility of improving bonding strength by increasing dentin mineral content. At the same time, it should be supported by further clinical studies since it remains in vitro.21 freshly extracted single rooted teeth will be treated endodontically, prepared for post space, and divided randomly into 3 groups: EDTA+CPP-ACP, EDTA + NaOCl, EDTA alone. Fiber post will be cemented and push out bond strength will be measured for all groups. The expected time of study is 6-8 months.

The Influence of Time and Cement Type on Push-Out Bond Strength of Fiber Posts to Root Dentin

2011 ◽  
Vol 36 (6) ◽  
pp. 643-648 ◽  
Author(s):  
AA Leme ◽  
M Coutinho ◽  
AF Insaurralde ◽  
PMC Scaffa ◽  
LM da Silva
Keyword(s):  
Bond Strength ◽  
Clinical Relevance ◽  
Resin Cement ◽  
Cement Type ◽  
Adhesive Resin ◽  
Fiber Posts ◽  
Etch And Rinse ◽  
Root Dentin ◽  
Adhesive Resin Cement ◽  
Push Out

Clinical Relevance A self-adhesive resin cement can provide a significantly stronger bond than a three-step etch-and-rinse adhesive and resin cement when used to lute fiber posts.

scholarly journals Influence of Relining Post on the Bond Strength of Resin Cements

2015 ◽  
Vol 16 (7) ◽  
pp. 559-564 ◽  
Author(s):  
Matheus Coelho Bandéca ◽  
Adriano Augusto Melo de Mendonça ◽  
Etevaldo Matos Maia Filho ◽  
Fausto da Silva Bramante ◽  
Darlon Martins Lima ◽  
...  
Keyword(s):  
Bond Strength ◽  
Resin Cement ◽  
The Self ◽  
Fiber Post ◽  
Resin Cements ◽  
Adhesive Resin ◽  
Fiber Posts ◽  
Significant Difference ◽  
Adhesive Cement ◽  
Push Out

ABSTRACT This study evaluated the influence of relining fiber posts on the bond strength (BS) of resin cements in the root canal. Forty bovine teeth were divided in four groups (n = 10)G1 (ARC)—fiber post cemented with resin cement RelyX ARC; G2 (ARC+Z350)—relined fiber post cemented with RelyX ARC; G3 (U200)—fiber post cemented with self-adhesive cement RelyX U200; G4 (U200+Z350)—relined fiber post cemented with RelyX U200. The roots were sectioned in six 1.2-mm slices and the push-out test was performed. Data were analyzed by three-way analysis of variance (ANOVA), and Tukey's test (α = 0.05). For the conventional resin cement, there was no significant difference between groups G1-ARC (15.5 ± 3.8) and G2-ARC+Z350 (16.1 ± 4.5). For the self-adhesive cement, the results revealed higher BS values for relined posts G4-U200 + Z350 (19.9 ± 7.9) as compared to non-relined posts G3-U200 (14.4 ± 4.5). For both cements, in groups of relined posts, the apical and the cervical thirds presented similar BS. Relining enhances the performance of the self-adhesive resin cement, and the interaction between relining and root third influences the BS to the conventional resin cement. How to cite this article Conde DM, Rodrigues VP, de Fátima Carvalho Souza S, Bauer JRO, da Silva Bramante F, Lima SNL, Filho EMM, Bandeca MC, de Mendonça AAM, Lima DM. Influence of Relining Post on the Bond Strength of Resin Cements. J Contemp Dent Pract 2015;16(7):559-564.

Sign in / Sign up

Export Citation Format

Share Document