scholarly journals Mechanical properties and electrical conductivity of carbon-polyurethane composites.

1990 ◽  
Vol 63 (5) ◽  
pp. 275-283 ◽  
Author(s):  
Mutsuhisa FURUKAWA ◽  
Kenji SUSUKIDA ◽  
Tetsuo YOKOYAMA
Keyword(s):  
Mechanical Properties ◽  
Electrical Conductivity ◽  
Polyurethane Composites

Graphene/polyurethane composites: fabrication and evaluation of electrical conductivity, mechanical properties and cell viability

RSC Advances ◽  
2015 ◽  
Vol 5 (120) ◽  
pp. 98762-98772 ◽  
Author(s):  
Gagan Kaur ◽  
Raju Adhikari ◽  
Peter Cass ◽  
Mark Bown ◽  
Margaret D. M. Evans ◽  
...  
Keyword(s):  
Mechanical Properties ◽  
Electrical Conductivity ◽  
Cell Viability ◽  
Biomedical Applications ◽  
Conductive Composites ◽  
Polyurethane Composites

Conductive composites of graphene and a siloxane polyurethane (Elast-Eon™) were prepared to explore their potential for use in biomedical applications.

Polypyrrole/PU hybrid hydrogels: electrically conductive and fast self-healing for the potential application in body-monitor sensor

2021 ◽  
Author(s):  
Zhanyu Jia ◽  
Guangyao Li ◽  
Juan Wang ◽  
shouhua Su ◽  
Jie Wen ◽  
...  
Keyword(s):  
Mechanical Properties ◽  
Electrical Conductivity ◽  
Potential Application ◽  
Self Healing ◽  
Electrically Conductive ◽  
Sensor Application ◽  
Hybrid Hydrogels ◽  
Health Monitor

Conductivity, self-healing and moderate mechanical properties are necessary for multifunctional hydrogels which have great potential in health-monitor sensor application. However, the combination of electrical conductivity, self-healing and good mechanical properties...

scholarly journals Effect of SWCNT-Tuball Paper on the Lightning Strike Protection of CFRPs and Their Selected Mechanical Properties

Materials ◽  
2021 ◽  
Vol 14 (11) ◽  
pp. 3140
Author(s):  
Kamil Dydek ◽  
Anna Boczkowska ◽  
Rafał Kozera ◽  
Paweł Durałek ◽  
Łukasz Sarniak ◽  
...  
Keyword(s):  
Mechanical Properties ◽  
Carbon Nanotubes ◽  
Electrical Conductivity ◽  
Copper Foil ◽  
Impact Resistance ◽  
Mechanical Analysis ◽  
Lightning Strike ◽  
Single Wall Carbon Nanotubes ◽  
Carbon Fibre Reinforced Polymer ◽  
The Impact

The main aim of this work was the investigation of the possibility of replacing the heavy metallic meshes applied onto the composite structure in airplanes for lightning strike protection with a thin film of Tuball single-wall carbon nanotubes in the form of ultra-light, conductive paper. The Tuball paper studied contained 75 wt% or 90 wt% of carbon nanotubes and was applied on the top of carbon fibre reinforced polymer before fabrication of flat panels. First, the electrical conductivity, impact resistance and thermo-mechanical properties of modified laminates were measured and compared with the reference values. Then, flat panels with selected Tuball paper, expanded copper foil and reference panels were fabricated for lightning strike tests. The effectiveness of lightning strike protection was evaluated by using the ultrasonic phased-array technique. It was found that the introduction of Tuball paper on the laminates surface improved both the surface and the volume electrical conductivity by 8800% and 300%, respectively. The impact resistance was tested in two directions, perpendicular and parallel to the carbon fibres, and the values increased by 9.8% and 44%, respectively. The dynamic thermo-mechanical analysis showed higher stiffness and a slight increase in glass transition temperature of the modified laminates. Ultrasonic investigation after lightning strike tests showed that the effectiveness of Tuball paper is comparable to expanded copper foil.

scholarly journals Enhanced electrical conductivity and mechanical properties in thermally stable fine-grained copper wire

2021 ◽  
Vol 2 (1) ◽  
Author(s):  
Qingzhong Mao ◽  
Yusheng Zhang ◽  
Yazhou Guo ◽  
Yonghao Zhao
Keyword(s):  
Mechanical Properties ◽  
Thermal Stability ◽  
Electrical Conductivity ◽  
Yield Strength ◽  
High Speed ◽  
Copper Wire ◽  
Rapid Development ◽  
Dislocation Slip ◽  
Ultrafine Grains ◽  
The Wire

AbstractThe rapid development of high-speed rail requires copper contact wire that simultaneously possesses excellent electrical conductivity, thermal stability and mechanical properties. Unfortunately, these are generally mutually exclusive properties. Here, we demonstrate directional optimization of microstructure and overcome the strength-conductivity tradeoff in copper wire. We use rotary swaging to prepare copper wire with a fiber texture and long ultrafine grains aligned along the wire axis. The wire exhibits a high electrical conductivity of 97% of the international annealed copper standard (IACS), a yield strength of over 450 MPa, high impact and wear resistances, and thermal stability of up to 573 K for 1 h. Subsequent annealing enhances the conductivity to 103 % of IACS while maintaining a yield strength above 380 MPa. The long grains provide a channel for free electrons, while the low-angle grain boundaries between ultrafine grains block dislocation slip and crack propagation, and lower the ability for boundary migration.

Effects of the Mould Pressure and Mould Pressing Time on the Properties of Graphite/Phenolic Resin Composites

2013 ◽  
Vol 706-708 ◽  
pp. 95-98
Author(s):  
Mi Dan Li ◽  
Dong Mei Liu ◽  
Lu Lu Feng ◽  
Huan Niu ◽  
Yao Lu
Keyword(s):  
Mechanical Properties ◽  
Electrical Conductivity ◽  
Flexural Strength ◽  
Polymer Matrix ◽  
Phenolic Resin ◽  
Polymer Matrix Composites ◽  
Resin Composites ◽  
Matrix Composites ◽  
Natural Graphite ◽  
Pressing Time

Polymer matrix composites made from phenolic resin are filled with natural graphite powders. They are fabricated by compression molding technique. The density, electrical conductivity and flexural strength of composite are analyzed to determine the influences of mould pressure and mould pressing time on the physical, electrical and mechanical properties of composite. It is found that the density, electrical conductivity and flexural strength of composites increased with increasing mould pressure. Under pressure of 40 MPa for 60 min, the density, electrical conductivity and flexural strength of composites were 1.85 g/cm3, 4.35  103 S/cm and 70 MPa, respectively. The decreased gaps could be the main reason for the increasing of density, electrical conductivity and flexural strength as mould pressure increases. The results also show that the density of composites increased with increasing mould pressing time.

Effect of Aging Treatment on Properties and Microstructure of an Al-7.5Zn-1.3Mg-1.4Cu-0.12Zr Alloy

2010 ◽  
Vol 638-642 ◽  
pp. 273-278 ◽  
Author(s):  
Xi Wu Li ◽  
Bai Qing Xiong ◽  
Yon Gan Zhang ◽  
Guo Jun Wang ◽  
Zhi Hui Li ◽  
...  
Keyword(s):  
Mechanical Properties ◽  
Electrical Conductivity ◽  
Grain Boundary ◽  
Response Rate ◽  
Aging Treatment ◽  
Aging Response ◽  
Peak Aging

In this study, the effect of various aging treatment (T6 and T7 treatment) on the mechanical properties, electrical conductivity and the microstructure of an Al-7.5Zn-1.3Mg-1.4Cu-0.12Zr alloy has been investigated. The results show that with elevating the aging treatment temperatures, the aging response rate is greatly accelerated. When T6 temper is performed at 140°C for 12h, as compared to peak aging for 24h at 120°C, the UTS and the corresponding Elongation values keep the same level, whereas the TYS and the electrical conductivity obviously increase by 5% and 9%, which is up to 560 MPa and 22.6 MS/m, respectively. And there are clear PFZs along the grain boundary and slightly coarser precipitates inside the grain. GPI zones, GPII zones and η' phases are major precipitates for the alloy under T6 condition. When T7 temper is performed on the alloy, the main precipitates are GPII zones, η′ and η phases. The coarser precipitates inside the grain and discontinuous grain boundary precipitates are favorable to electrical conductivity, which decrease the strength of 5~17% compared to T6 treatment. After T76 treatment (i.e., 110°C/6 h + 160°C/6 h), the UTS, TYS, Elongation and electrical conductivity values were 540 MPa, 510 MPa, 16.7% and 23.5 MS/m, respectively.

scholarly journals Influence of the Chemical Composition on Electrical Conductivity and Mechanical Properties of the Hypoeutectic Al-Si-Mg Alloys

2016 ◽  
Vol 61 (1) ◽  
pp. 353-360 ◽  
Author(s):  
B. Dybowski ◽  
J. Szymszal ◽  
Ł. Poloczek ◽  
A. Kiełbus
Keyword(s):  
Mechanical Properties ◽  
Electrical Conductivity ◽  
Chemical Composition ◽  
Aluminium Alloys ◽  
Mg Alloys ◽  
High Electrical Conductivity ◽  
Transportation Industry ◽  
Proper Selection ◽  
Ti Addition ◽  
Selection Of

Due to low density and good mechanical properties, aluminium alloys are widely applied in transportation industry. Moreover, they are characterized by the specific physical properties, such as high electrical conductivity. This led to application of the hypoeutectic Al-Si-Mg alloys in the power generation industry. Proper selection of the alloys chemical composition is an important stage in achievement of the demanded properties. The following paper presents results of the research on the influence of alloys chemical composition on their properties. It has been revealed that Si and Ti addition decreases electrical conductivity of the Al-Si-Mg alloys, while Na addition increases it. The mechanical properties of the investigated alloys are decreased by both silicon and iron presence. Sodium addition increases ductility of the Al-Si-Mg alloys.

Sign in / Sign up

Export Citation Format

Share Document