scholarly journals Three Palatal Arches Used to Correct Posterior Dental Crossbites

2006 ◽  
Vol 76 (6) ◽  
pp. 1047-1051 ◽  
Author(s):  
Fernando Lima Martinelli ◽  
Priscilla Sobral Couto ◽  
Antonio Carlos Oliveira Ruellas
Keyword(s):  
Mechanical Properties ◽  
Stainless Steel ◽  
Statistical Analysis ◽  
Orthodontic Treatment ◽  
Elasticity Modulus ◽  
Steel Wire ◽  
Testing Machine ◽  
Stainless Steel Wire ◽  
Quad Helix ◽  
One Way Anova

Abstract Objective: To assess the force, resilience, and elasticity modulus produced by the Coffin appliance, “W” arch, and quad-helix made with 0.032-inch and 0.036-inch stainless steel wire. Materials and Methods: Two groups of 15 arches were made as Coffin appliances, two groups of 15 arches were made as “W” arches, and two groups of 15 arches were made as quad-helices. One group of each appliance was formed in 0.032-inch and one group in 0.036-inch stainless steel wire. All arches (6 groups of 15 each) were submitted to compression trials in the mechanical testing machine EMIC DL-10000, simulating 5-, 8-, 10-, and 12-mm activation. The force and resilience means received a one-way ANOVA statistical analysis. Results: The results showed that the mechanical properties depended on the shape of the appliance, the diameter of the wire used, and the amount of activation. Conclusions: The three appliances assessed produce appropriate forces for orthodontic treatment as long as they are correctly planned during clinical application.

Bending Properties of General Purpose Stainless Steel Wire Formed for Orthodontic Use

2013 ◽  
Vol 746 ◽  
pp. 394-399
Author(s):  
Niwat Anuwongnukroh ◽  
Yosdhorn Chuankrerkkul ◽  
Surachai Dechkunakorn ◽  
Pornkiat Churnjitapirom ◽  
Theeralaksna Suddhasthira
Keyword(s):  
Mechanical Properties ◽  
Stainless Steel ◽  
Orthodontic Treatment ◽  
Steel Wire ◽  
General Purpose ◽  
Stainless Steel Wire ◽  
Bending Test ◽  
Bending Properties ◽  
Steel Wires ◽  
Significant Difference

The archwire is generally used in fixed appliances for orthodontic treatment to correct dental malocclusion. However, it is interesting to know whether general purpose stainless steel wire could replace commercial orthodontic archwire in orthodontic practice for economic reasons. The purpose of this study was to determine the bending properties of general purpose stainless steel wire compared with commercial orthodontic stainless steel wires after forming as an archwire for orthodontic use. The samples used in this study were 90 general purpose and 45 commercial (Highland) round stainless steel wires in 0.016, 0.018, and 0.020 sizes (30 general purpose and 15 commercial wires for each size). All 15 general purpose stainless steel wires with different sizes were formed into orthodontic archwire with a Universal Testing Machine. All samples were tested (three-point bending test) for mechanical properties. The results showed no significant difference between general purpose and commercial orthodontic wires in size 0.016 for 0.1 mm offset bending force, 0.2% yield strength, and springback. Although many mechanical properties of general purpose wires differed from commercial wires, their values conformed to other previous studies within the range of clinical acceptance. In conclusion, orthodontic formed general purpose round stainless steel wires had statistically different (p <0.05) mechanical properties from commercial orthodontic stainless steel wires (Highland) but the mechanical properties were acceptable to use in orthodontic treatment.

Mechanical evaluation of two loop-fastening methods for stainless steel wire

2004 ◽  
Vol 17 (04) ◽  
pp. 241-246
Author(s):  
Y. Bar-Am ◽  
E. Klement ◽  
V. Fourman ◽  
R. Shahar
Keyword(s):  
Stainless Steel ◽  
Steel Wire ◽  
Testing Machine ◽  
Stainless Steel Wire ◽  
Materials Testing ◽  
Clinical Use ◽  
Testing Procedures ◽  
Load To Failure ◽  
And Performance ◽  
Deficient Knee

SummaryThe clinical use of stainless steel wire in veterinary orthopaedics is common, and occurs in diverse situations. One of the most common uses of stainless steel wire is the fabello-tibial suture to stabilize the cranial cruciate deficient knee (10). Numerous reports have appeared in the literature, describing biomechanical aspects of the use of stainless steel wire. The purpose of the study presented herein was to compare the strength and performance of two methods used to fasten loops of stainless steel wire: the traditional twistknot method and the crimp-clamp method. Both loopfastening methods were evaluated with two diameters of wire (1.0 mm and 1.2 mm). Both static and dynamic (cyclical) testing procedures were performed. Using a materials testing machine maximum tensile strength (load to failure), loop elongation, mode of loop failure and location of loop failure were recorded. The results of the study demonstrate that loops fastened with the crimp clamp method resulted in higher load to failure than the traditional twist knot method.

scholarly journals Effect of drawing and annealing on the microstructure and mechanical properties of 304 austenitic stainless steel wire

2021 ◽  
Author(s):  
Qinhua Xu ◽  
Jianxin Zhu ◽  
Yong Zong ◽  
Lihua Liu ◽  
Xiaoyong Zhu ◽  
...  
Keyword(s):  
Mechanical Properties ◽  
Tensile Strength ◽  
Stainless Steel ◽  
Austenitic Stainless Steel ◽  
Steel Wire ◽  
Stacking Fault ◽  
Stainless Steel Wire ◽  
Electron Backscattered Diffraction ◽  
Microstructure And Mechanical Properties ◽  
304 Austenitic Stainless Steel

Abstract Plastic deformation at room temperature, and the proceeding heat treatments, are important processes for optimizing the microstructure and mechanical properties of austenitic stainless steel. The microstructure and mechanical properties of cold-drawn 304 austenitic stainless steel wire were investigated after annealing at 700 and 800 °C, with different times (20, 40 and 60 min) and drawing strain (0.4, 1.0 and 1.5). Electron backscattered diffraction (EBSD) techniques, trans-mission electron microscope (TEM) analysis, differential scanning calorimeter (DSC) and tensile tests were performed in order to study the microstructure evolution and mechanical properties during different annealing processes for the 304 austenitic stainless steel wire. The results showed that the quantity of α’ martensite and dislocations increased with an increase in the strain, which means that, while the ultimate tensile strength of the cold-drawn wires elevated, the elongation reduced. The mechanical properties of stainless steel wires also varied with the evolution of martensite transformation characteristics, density of stacking fault, dislocation and twin, as well as the recrystallization degree under various annealing conditions. The recrystalli-zation temperature of steel wire was mainly determined by the magnitude of the strain, while the martensite reversal temperature was determined by the stacking fault energy and the de-formation value. The temperature of recrystallization and martensite reverse in steel wire de-creased with the increment of the strain. The balance of tensile strength and elongation of steel wire can be obtained by adopting the proper annealing process combined with cold-drawing deformation. In this paper, we showed that a good combination of strength and elongation in 304 austenitic stainless steel can be obtained with a strain of 1.5 annealed at 800 °C for 20 min.

Comparison of Properties between General Purpose Stainless Steel Wire and Commercial Orthodontic Stainless Steel Wire

2011 ◽  
Vol 378-379 ◽  
pp. 706-710 ◽  
Author(s):  
Niwat Anuwongnukroh ◽  
Surachai Dechkunakorn ◽  
Pornkiat Churnjitapirom ◽  
Ekkapot Sukhanun ◽  
Tunwa Intrarasuksanti ◽  
...  
Keyword(s):  
Mechanical Properties ◽  
Stainless Steel ◽  
Corrosion Resistance ◽  
Steel Wire ◽  
Nickel Content ◽  
Chemical Properties ◽  
Surface Characteristics ◽  
General Purpose ◽  
Stainless Steel Wire ◽  
Steel Wires

In Thailand, commercial orthodontic stainless steel wires are imported from overseas and expensive. However, lower cost general purpose stainless steel wires, the same type and number as commercial orthodontic stainless steel wires may be used for orthodontic purposes. Objective: This study aimed to determine the physical, mechanical and chemical properties of general purpose stainless steel wire compared with commercial orthodontic stainless steel wires. Materials and Method: Two commercial orthodontic stainless steel wires (Ormco and Highland) and general purpose stainless steel wire (SUS 304H) were evaluated. The physical and mechanical properties were studied according to ISO 15841:2006 and corrosion resistance was studied according to ISO 10271:2001. Surface characteristics and composition were studied by scanning electron microscope (SEM) and electron probe micro analyzer, respectively. Results: The experiment indicated that SUS 304H had the diameter and mechanical properties in the range of orthodontic stainless steel wires. The surface characteristics SUS 304H were similar from observation by SEM magnifications but SUS 304H had lower corrosion resistance due to lower nickel content. The composition confirmed that the three samples wires were genuine type 304. Conclusion: SUS 304H properties are comparable to commercial orthodontic wire properties.

Sign in / Sign up

Export Citation Format

Share Document