The Treasure of the Oxus with Other Examples of Early Oriental Metal-Work

1970 ◽  
Vol 90 (2) ◽  
pp. 340
Author(s):  
Edwin M. Yamauchi ◽  
O. M. Dalton
Keyword(s):  
Metal Work

Barrier heights of Schottky contacts on strained AlGaN/GaN heterostructures: Determination and effect of metal work functions

2003 ◽  
Vol 82 (24) ◽  
pp. 4364-4366 ◽  
Author(s):  
Zhaojun Lin ◽  
Wu Lu ◽  
Jaesun Lee ◽  
Dongmin Liu ◽  
Jeffrey S. Flynn ◽  
...  
Keyword(s):  
Schottky Contacts ◽  
Barrier Heights ◽  
Work Functions ◽  
Metal Work

Two-terminal vertical thyristor using Schottky contact emitter to improve thermal instability

Nano Futures ◽  
2021 ◽  
Author(s):  
Min-Won Kim ◽  
Ji-Hun Kim ◽  
Jun-Seong Park ◽  
Byoung-Seok Lee ◽  
Sangdong Yoo ◽  
...  
Keyword(s):  
Thermal Stability ◽  
Work Function ◽  
Thermal Instability ◽  
Schottky Contact ◽  
Memory Cell ◽  
Cross Point ◽  
Operation Temperature ◽  
Metal Work Function ◽  
Metal Work ◽  
Contact Metal

Abstract In a two-terminal-electrode vertical thyristor, the latch-up and latch-down voltages are decreased when the memory operation temperature of the memory cells increases, resulting in a severe reliability issue (i.e., thermal instability). This study fundamentally solves the thermal instability of a vertical-thyristor by achieving a cross-point memory-cell array using a vertical-thyristor with a structure of vertical n++-emitter, p+-base, n+-base, and p++-emitter. The vertical-thyristor using a Schottky contact metal emitter instead of an n++-Si emitter significantly improves the thermal stability between 293 and 373 K. Particularly, the improvement degree of the thermal stability is increased significantly with the use of the Schottky contact metal work function. Because the thermal instability (i.e., degree of latch-up voltage decrement vs. memory operation temperature) decreases with an increase in the Schottky contact metal work function, the dependency of the forward current density between the Schottky contact metal and p+-Si based on the memory operation temperature reduces with increase in the Schottky contact metal work function. Consequently, a higher Schottky contact metal work function produces a higher degree of improvement in the thermal stability, i.e., W (4.50 eV), Ti (4.33 eV), Ta (4.25 eV), and Al (4.12 eV). Further research on the fabrication process of a Schottky contact metal emitter vertical-thyristor is essential for the fabrication of a 3-D cross-point memory-cell.

scholarly journals Application of Image Processing for the Quality Testing of Sheet Metal Work

2013 ◽  
Vol 5 (1) ◽  
pp. 142-145
Author(s):  
S. Ramakrishnan ◽  
B. Thamotharan ◽  
B. Niranjana ◽  
J. Saranya
Keyword(s):  
Image Processing ◽  
Sheet Metal ◽  
Quality Testing ◽  
Metal Work

scholarly journals DESIGN OF A 3D-PRINTED THREE-CLAW ROBOTIC GRIPPER END-EFFECTOR

2021 ◽  
Vol 11 (4) ◽  
pp. 70-79
Author(s):  
Dino Dominic Forte Ligutan ◽  
Argel Alejandro Bandala ◽  
Jason Limon Española ◽  
Richard Josiah Calayag Tan Ai ◽  
Ryan Rhay Ponce Vicerra ◽  
...  
Keyword(s):  
3D Printing ◽  
Polylactic Acid ◽  
Grip Force ◽  
Thermoplastic Polyurethane ◽  
Robotic Arm ◽  
End Effector ◽  
Design Considerations ◽  
3D Printed ◽  
Materials Used ◽  
Metal Work

The development of a novel 3D-printed three-claw robotic gripper shall be described in this paper with the goal of incorporating various design considerations. Such considerations include the grip reliability and stability, grip force maximization, wide object grasping capability. Modularization of its components is another consideration that allows its parts to be easily machined and reusable. The design was realized by 3D printing using a combination of tough polylactic acid (PLA) material and thermoplastic polyurethane (TPU) material. In practice, additional tolerances were also considered for 3D printing of materials to compensate for possible expansion or shrinkage of the materials used to achieve the required functionality. The aim of the study is to explore the design and eventually deploy the three-claw robotic gripper to an actual robotic arm once its metal work fabrication is finished.

scholarly journals Metal Work

2019 ◽  
Vol 1 (3) ◽  
Author(s):  
Catherine Anne Mathias
Keyword(s):  
Metal Work
Sign in / Sign up

Export Citation Format

Share Document