Decay in Wood and Wood Fiber Products by Sporotrichum pruinosum

Mycologia ◽  
1966 ◽  
Vol 58 (4) ◽  
pp. 592 ◽  
Author(s):  
W. Merrill ◽  
D. W. French
Keyword(s):  
Wood Fiber ◽  
Sporotrichum Pruinosum

Decay in Wood and Wood Fiber Products by Sporotrichum Pruinosum

Mycologia ◽  
1966 ◽  
Vol 58 (4) ◽  
pp. 592-596
Author(s):  
W. Merrill ◽  
D. W. French
Keyword(s):  
Wood Fiber ◽  
Sporotrichum Pruinosum

SEM Study of Tension Wood Fiber Morphology and its Effect on Paper Properties

1977 ◽  
Vol 35 ◽  
pp. 308-309
Author(s):  
K. W. Robinson
Keyword(s):  
Tension Wood ◽  
Wood Fiber ◽  
Strength Properties ◽  
Fiber Morphology ◽  
Paper Properties ◽  
Pure Cellulose ◽  
Short Rotation ◽  
Hardwood Trees ◽  
Sem Study

Tension wood (TW) is an abnormal tissue of hardwood trees; although it has been isolated from most parts of the tree, it is frequently found on the upper side of branches and leaning stems. TW has been classically associated with geotropic alignment, but more recently it has been associated with fast growth. Paper made from TW is generally lower in strength properties. Consequently, the paper industries' growing dependence on fast growing, short- rotation trees will result in higher amounts of TW in the final product and a corresponding reduction in strength.Relatively few studies have dealt with the role of TW in the structure of paper. It was suggested that the lower strength properties of TW were due to a combination of factors, namely, its unique morphology, compression failures in the cell wall, and lower hemicellulose content. Central to the unique morphology of the TW fiber is the thick gelatinous layer (G-layer) composed almost entirely of pure cellulose.

Mechanical Pulp & Non-wood Fiber. Outline of Mechanical Pulp.

1998 ◽  
Vol 52 (9) ◽  
pp. 1145-1158
Author(s):  
Sakujiro Oka
Keyword(s):  
Wood Fiber ◽  
Mechanical Pulp

A Lean Logistics Framework: A Case Study in the Wood Fiber Supply Chain

2020 ◽  
Vol 52 (1) ◽  
pp. 117-127
Author(s):  
Paula Fallas Valverde ◽  
Henry Quesada ◽  
Brian Bond
Keyword(s):  
Supply Chain ◽  
Wood Fiber ◽  
Lean Logistics

Chitosan/Polyethylene Oxide (PEO) Filled Carbonized Wood Fiber Conductive Composite Film

2020 ◽  
Vol 1010 ◽  
pp. 638-644
Author(s):  
Mohd Pisal Mohd Hanif ◽  
Abd Jalil Jalilah ◽  
Mohd Fadzil Hanim Anisah ◽  
Arumugam Tilagavathy
Keyword(s):  
Electrical Conductivity ◽  
Tensile Strength ◽  
Polyethylene Oxide ◽  
Biomedical Applications ◽  
Wood Fiber ◽  
Conductive Polymer ◽  
Renewable Resource ◽  
Blend Films ◽  
Conductive Composite Film ◽  
Carbonized Wood

Biopolymer-based conductive polymer composites (CPCs) would open up various possibilities in biomedical applications owing to ease of processing, renewable resource and environmentally friendly. However, low mechanical properties are a major issue for their applications. In this study, the investigated the conductivity of chitosan/ PEO blend films filled with carbonized wood fiber (CWF) prepared by solution casting. The effect of CWF was also investigated on tensile properties and their morphological surfaces. The tensile results from different ratios of chitosan/PEO blend films without CWF show that the tensile strength and modulus increased with the increase of chitosan content and chitosan/PEO blend film with 70/30 ratio exhibited the best combination of tensile strength and flexibility. However, a reduction of tensile strength was observed when CWF amount was increased while the modulus of the tensile shows an increment. The film also exhibited higher electrical conductivity as compared to low chitosan ratio. The addition of CWF greatly enhanced the conductivity three-fold from 10-10 to 10-6 S/cm. The electrical conductivity continued to increase with the increase of CWF up to 30wt%. The surface morphology by Scanning Electron Microscopy (SEM) exhibits the absence of phase separation for the blends indicating good miscibility between the PEO and chitosan. Incorporation of CWF into the blend films at 5wt% showed agglomeration. However, the increase of CWF created larger agglomerations that formed conductive pathways resulting in improved conductivity. FTIR analysis suggested that intermolecular interactions occurred between chitosan and PEO while CWF interacts more with the protons of PEO.

Aluminum and copper deposition through the process of thermal flame spray on polypropylene-pine wood fiber composite filaments and their applications

2021 ◽  
pp. 002199832110365
Author(s):  
Sônia MA Veroneze ◽  
Thais HS Flores-Sahagun ◽  
Ramón SC Paredes ◽  
Kestur Gundappa Satyanarayana
Keyword(s):  
Fiber Composite ◽  
Wood Fiber ◽  
Physical And Mechanical Properties ◽  
Heat Treating ◽  
Flame Spray ◽  
Pine Wood ◽  
Thermal Spray Process ◽  
Spray Process ◽  
Copper Coatings ◽  
Study Results

This paper presents a study about polypropylene-pine wood composites, both as filaments and products, coated with aluminum (Al) or copper (Cu), obtained through flame thermal spray process after subjecting the composites to thermal treatments in the second and third step of the study. Results revealed that a previous aluminum layer was needed in order to obtain copper coatings on the composites. The physical and mechanical properties of both metal coated composite filaments were also evaluated and compared with the uncoated composite filaments with and without heat treating these. Consequently, it was observed that the nature of the coating adhesion on the substrates was mechanical, and therefore abrasion blasting of filaments or the use of a higher wood fiber content in the composite improved the Al or Cu adhesion. Also, it was observed that extruded wood fiber/PP filaments should not be cooled in water because pieces might be molded directly once the moisture affects the metal coatings adhesion onto the substrates.

Machinability of wood fiber/polyethylene composite during orthogonal cutting

2021 ◽  
Author(s):  
Xiaolei Guo ◽  
Jinxin Wang ◽  
Dietrich Buck ◽  
Zhaolong Zhu ◽  
Yong Guo
Keyword(s):  
Orthogonal Cutting ◽  
Wood Fiber ◽  
Polyethylene Composite
Sign in / Sign up

Export Citation Format

Share Document