Responses of the Gut to Moderate Energy Demands in a Small Herbivore (Microtus pennsylvanicus)

1993 ◽  
Vol 74 (1) ◽  
pp. 59-68 ◽  
Author(s):  
T. L. Derting ◽  
B. A. Bogue
Keyword(s):  
Microtus Pennsylvanicus ◽  
Energy Demands ◽  
Moderate Energy

A NEW TEST METHOD FOR SHIPPING PALLETS OF SOLAR PRODUCTS

2016 ◽  
Vol 40 (4) ◽  
pp. 481-489
Author(s):  
Shu-Tsung Hsu ◽  
Yean-San Long ◽  
Teng-Chun Wu
Keyword(s):  
Yield Loss ◽  
Test Method ◽  
Package Design ◽  
Rate Analysis ◽  
Energy Demands ◽  
Pv Module ◽  
Cell Module ◽  
Solar Cell Module ◽  
Module System

The photovoltaic (PV) industry is expanding rapidly to meet the growing renewable-energy demands globally. The failure-rate analysis indicated that a large portion of the accelerated PV module qualification failures were related to the failure of PV cell itself, which was leading to the yield loss of PV products during shipping or transportation. Therefore, the damaged cell (or module) caused by shipping is always one of the serious problems to impact the long-term reliability of PV product. This paper aims to propose a new test method of reliability evaluation for shipping pallet of solar product. The first scenario is the test pallet shipped in fab (e.g., fork-lift truck or hand-pallet truck). The second scenario is the test pallet transported from fab to fab by different vehicle (e.g., truck, train, aircraft, and shipboard). Consequently, detailed results were applied to SEMI Doc. 5431 and released as SEMI PV56-1214 by voting in December 2014. The solar cell/module/system makers and buyers, or any other party interested like package design, can thus have a common document to refer to when desired.

scholarly journals The “Zero Miles Product” Concept Applied to Biofuel Production: A Case Study

Energies ◽  
2021 ◽  
Vol 14 (3) ◽  
pp. 565
Author(s):  
Nikolaj Kaae Kirk ◽  
Clara Navarrete ◽  
Jakob Ellegaard Juhl ◽  
José Luis Martínez ◽  
Alessandra Procentese
Keyword(s):  
Sugar Content ◽  
Point Of View ◽  
Biofuel Production ◽  
Transport Costs ◽  
Economic Point ◽  
Product Concept ◽  
Energy Demands ◽  
Production Platform ◽  
High Sugar Content

To make biofuel production feasible from an economic point of view, several studies have investigated the main associated bottlenecks of the whole production process through approaches such as the “cradle to grave” approach or the Life Cycle Assessment (LCA) analysis, being the main constrains the feedstock collection and transport. Whilst several feedstocks are interesting because of their high sugar content, very few of them are available all year around and moreover do not require high transportation’ costs. This work aims to investigate if the “zero miles” concept could bring advantages to biofuel production by decreasing all the associated transport costs on a locally established production platform. In particular, a specific case study applied to the Technical University of Denmark (DTU) campus is used as example to investigate the advantages and feasibility of using the spent coffee grounds generated at the main cafeteria for the production of bioethanol on site, which can be subsequently used to (partially) cover the campus’ energy demands.

scholarly journals Experimental Data and Simulations of Performance and Thermal Comfort in a Typical Mediterranean House

Energies ◽  
2021 ◽  
Vol 14 (11) ◽  
pp. 3311
Author(s):  
Víctor Pérez-Andreu ◽  
Carolina Aparicio-Fernández ◽  
José-Luis Vivancos ◽  
Javier Cárcel-Carrasco
Keyword(s):  
Energy Efficiency ◽  
Thermal Comfort ◽  
Energy Demand ◽  
Natural Ventilation ◽  
Thermal Characterization ◽  
Energy Performance ◽  
Building Stock ◽  
Energy Demands ◽  
Dwelling House ◽  
Account Standard

The number of buildings renovated following the introduction of European energy-efficiency policy represents a small number of buildings in Spain. So, the main Spanish building stock needs an urgent energy renovation. Using passive strategies is essential, and thermal characterization and predictive tests of the energy-efficiency improvements achieving acceptable levels of comfort for their users are urgently necessary. This study analyzes the energy performance and thermal comfort of the users in a typical Mediterranean dwelling house. A transient simulation has been used to acquire the scope of Spanish standards for its energy rehabilitation, taking into account standard comfort conditions. The work is based on thermal monitoring of the building and a numerical validated model developed in TRNSYS. Energy demands for different models have been calculated considering different passive constructive measures combined with real wind site conditions and the behavior of users related to natural ventilation. This methodology has given us the necessary information to decide the best solution in relation to energy demand and facility of implementation. The thermal comfort for different models is not directly related to energy demand and has allowed checking when and where the measures need to be done.

MOF-derived PtCo/Co3O4 nanocomposites in carbonaceous matrices as high-performance ORR electrocatalysts synthesized via Laser Ablation techniques

2021 ◽  
Author(s):  
Erick Leonar Ribeiro ◽  
Elijah M Davis ◽  
Mahshid Mokhtarnejad ◽  
Sheng Hu ◽  
Dibyendu Mukherjee ◽  
...  
Keyword(s):  
Fuel Cell ◽  
Laser Ablation ◽  
Energy Conversion ◽  
High Performance ◽  
Sustainable Energy ◽  
Ablation Techniques ◽  
Global Energy ◽  
Cell Technology ◽  
Energy Demands ◽  
Rational Development

Rapidly expanding global energy demands due to fast-paced human-technology interfaces have propelled fuel cell technology as a sustainable energy-conversion alternative. Nonetheless, the rational development of such technology demands the engineering...

scholarly journals Dye-Sensitized Solar Cell for Indoor Applications: A Mini-Review

2021 ◽  
Author(s):  
Dheeraj Devadiga ◽  
M. Selvakumar ◽  
Prakasha Shetty ◽  
M. S. Santosh
Keyword(s):  
Solar Cell ◽  
Dye Sensitized Solar Cell ◽  
Low Light ◽  
Dye Sensitized ◽  
Energy Demands ◽  
Roll To Roll ◽  
Wearable Systems ◽  
Recent Developments ◽  
Sustainable Power ◽  
The Internet Of Things

AbstractLightweight computing technologies such as the Internet of Things and flexible wearable systems have penetrated our everyday lives exponentially in recent years. Without a question, the running of such electronic devices is a major energy problem. Generally, these devices need power within the range of microwatts and operate mostly indoors. Thus, it is appropriate to have a self-sustainable power source, such as the photovoltaic (PV) cell, which can harvest indoor light. Among other PV cells, the dye-sensitized solar cell (DSSC) has immense capacity to satisfy the energy demands of most indoor electronics, making it a very attractive power candidates because of its many benefits such as readily available materials, relatively cheap manufacturing methods, roll-to-roll compatibility, easy processing capabilities on flexible substrates and exceptional diffuse/low-light performance. This review discusses the recent developments in DSSC materials for its indoor applications. Ultimately, the perspective on this topic is presented after summing up the current progress of the research. Graphic abstract

scholarly journals Evaluation of the energy demands for a floating O&M-hub

2021 ◽  
Author(s):  
F. Wittmann ◽  
C. Schmitt ◽  
F. Adam ◽  
P. Dierken
Keyword(s):  
Software Tool ◽  
Energy System ◽  
Spare Parts ◽  
Simulation Software ◽  
Offshore Wind ◽  
Baseline Scenario ◽  
Horizon 2020 ◽  
Energy Supply System ◽  
The North ◽  
Energy Demands

AbstractThe Energyhub@Sea concept is one of the four research applications of the Space@Sea project funded by the EU’s Horizon 2020 research program (GA number: 774253). The focus of this paper is the evaluation of the energy demands of an energy self-sufficient maintenance platform at the location of Helgoland in the North Sea. In view of this, a standardized modular floater was developed as an offshore wind operation and maintenance base, which in the following paper is referred to as an O&M hub. The O&M hub is intended to be equipped with accommodation facilities and various renewable energy infrastructure as well as spare parts logistics, enabling the platform to perform maintenance of offshore gearless wind turbines with a capacity of up to 10 MW. To be energy self-sustaining, an energy supply system for the hub was developed and simulated at a resolution of ten minutes by means of the Top-Energy simulation software, a commercial software tool. As a basis for the simulation, an approach for the automated determination of flexible load profiles, in resolutions of up to ten minutes was developed. This load profile generator creates load profiles on the basis of environmental conditions, technical characteristics, and expected behaviors of the inhabitants. On the basis of the generated load profiles, a first layout (referred to as baseline scenario) for the different components of the energy system was evaluated and tested through simulation. In a second step, three optimization scenarios were developed and simulated with regards to the financial feasibility of the Energyhub.

scholarly journals In vivo synaptic density relates to glucose metabolism at rest in healthy subjects, but is strongly modulated by regional differences

2021 ◽  
pp. 0271678X2098150
Author(s):  
June van Aalst ◽  
Jenny Ceccarini ◽  
Stefan Sunaert ◽  
Patrick Dupont ◽  
Michel Koole ◽  
...  
Keyword(s):  
Glucose Metabolism ◽  
Medial Temporal Lobe ◽  
Regional Differences ◽  
Specific Binding ◽  
Aerobic Glycolysis ◽  
Glucose Consumption ◽  
Brain Regions ◽  
Synaptic Density ◽  
Energy Demands

Preclinical and postmortem studies have suggested that regional synaptic density and glucose consumption (CMRGlc) are strongly related. However, the relation between synaptic density and cerebral glucose metabolism in the human brain has not directly been assessed in vivo. Using [11C]UCB-J binding to synaptic vesicle glycoprotein 2 A (SV2A) as indicator for synaptic density and [18F]FDG for measuring cerebral glucose consumption, we studied twenty healthy female subjects (age 29.6 ± 9.9 yrs) who underwent a single-day dual-tracer protocol (GE Signa PET-MR). Global measures of absolute and relative CMRGlc and specific binding of [11C]UCB-J were indeed highly significantly correlated ( r > 0.47, p < 0.001). However, regional differences in relative [18F]FDG and [11C]UCB-J uptake were observed, with up to 19% higher [11C]UCB-J uptake in the medial temporal lobe (MTL) and up to 17% higher glucose metabolism in frontal and motor-related areas and thalamus. This pattern has a considerable overlap with the brain regions showing different levels of aerobic glycolysis. Regionally varying energy demands of inhibitory and excitatory synapses at rest may also contribute to this difference. Being unaffected by astroglial and/or microglial energy demands, changes in synaptic density in the MTL may therefore be more sensitive to early detection of pathological conditions compared to changes in glucose metabolism.

scholarly journals The Multifaceted Roles of Zinc in Neuronal Mitochondrial Dysfunction

Biomedicines ◽  
2021 ◽  
Vol 9 (5) ◽  
pp. 489
Author(s):  
Hilary Y. Liu ◽  
Jenna R. Gale ◽  
Ian J. Reynolds ◽  
John H. Weiss ◽  
Elias Aizenman
Keyword(s):  
Mitochondrial Permeability Transition ◽  
Neuronal Damage ◽  
Mitochondrial Fission ◽  
Permeability Transition ◽  
High Energy ◽  
Atp Depletion ◽  
Ros Generation ◽  
Cellular Functions ◽  
Calcium Deregulation ◽  
Energy Demands

Zinc is a highly abundant cation in the brain, essential for cellular functions, including transcription, enzymatic activity, and cell signaling. However, zinc can also trigger injurious cascades in neurons, contributing to the pathology of neurodegenerative diseases. Mitochondria, critical for meeting the high energy demands of the central nervous system (CNS), are a principal target of the deleterious actions of zinc. An increasing body of work suggests that intracellular zinc can, under certain circumstances, contribute to neuronal damage by inhibiting mitochondrial energy processes, including dissipation of the mitochondrial membrane potential (MMP), leading to ATP depletion. Additional consequences of zinc-mediated mitochondrial damage include reactive oxygen species (ROS) generation, mitochondrial permeability transition, and excitotoxic calcium deregulation. Zinc can also induce mitochondrial fission, resulting in mitochondrial fragmentation, as well as inhibition of mitochondrial motility. Here, we review the known mechanisms responsible for the deleterious actions of zinc on the organelle, within the context of neuronal injury associated with neurodegenerative processes. Elucidating the critical contributions of zinc-induced mitochondrial defects to neurotoxicity and neurodegeneration may provide insight into novel therapeutic targets in the clinical setting.

scholarly journals Processing Methodologies of Wet Microalga Biomass Toward Oil Separation: An Overview

Molecules ◽  
2021 ◽  
Vol 26 (3) ◽  
pp. 641
Author(s):  
Vânia Pôjo ◽  
Tânia Tavares ◽  
Francisco Xavier Malcata
Keyword(s):  
Food System ◽  
Lipid Extraction ◽  
High Energy ◽  
Economic Feasibility ◽  
Alternative Source ◽  
Microalgal Biomass ◽  
Energy Demands ◽  
Chemical Profiles ◽  
System Sustainability ◽  
Industrial Level

One of the main goals of Mankind is to ensure food system sustainability—including management of land, soil, water, and biodiversity. Microalgae accordingly appear as an innovative and scalable alternative source in view of the richness of their chemical profiles. In what concerns lipids in particular, microalgae can synthesize and accumulate significant amounts of fatty acids, a great fraction of which are polyunsaturated; this makes them excellent candidates within the framework of production and exploitation of lipids by various industrial and health sectors, either as bulk products or fine chemicals. Conventional lipid extraction methodologies require previous dehydration of microalgal biomass, which hampers economic feasibility due to the high energy demands thereof. Therefore, extraction of lipids directly from wet biomass would be a plus in this endeavor. Supporting processes and methodologies are still limited, and most approaches are empirical in nature—so a deeper mechanistic elucidation is a must, in order to facilitate rational optimization of the extraction processes. Besides circumventing the current high energy demands by dehydration, an ideal extraction method should be selective, sustainable, efficient, harmless, and feasible for upscale to industrial level. This review presents and discusses several pretreatments incurred in lipid extraction from wet microalga biomass, namely recent developments and integrated processes. Unfortunately, most such developments have been proven at bench-scale only—so demonstration in large facilities is still needed to confirm whether they can turn into competitive alternatives.

Sign in / Sign up

Export Citation Format

Share Document